Part of the Ratio 'Quick Assembly' family of signals. These allow you to make home and distant signals quickly and easily. They include signal operating wire and lever. This kit enables you to replicate an LMS Round Post Home Signal. Glue and paints required to complete model.

Advanced Construction Signals. Aimed at modellers with more experience, these kits enable you to custom make specific configurations of signals to suit your track layout and train paths. This kit will make either 4 separate signals, or combinations of bracket signals plus 4 Ground Signals. It can also be used with the Pratt Truss Gantry kit (Ref 478) to provide over track signals. Glue and paints required to complete model.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 680mm of classic Midland Railway diagonal style fencing fencing.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 680mm of classic Midland Railway diagonal style fencing fencing.

Advanced Construction Signals. Aimed at modellers with more experience, these kits enable you to custom make specific configurations of signals to suit your track layout and train paths. This kit will make either 4 separate signals, or combinations of bracket signals. It can also be used with the Pratt Truss Gantry kit (Ref 478) to provide over track signals. Glue and paints required to complete model.

Pack includes parts to make a pair of these LNWR design bogies. Kit includes wheels and tension lock couplings; supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Advanced Construction Signals. Aimed at modellers with more experience, these kits enable you to custom make specific configurations of signals to suit your track layout and train paths. This kit can make 1 signal, with combinations of bracket signals plus 4 Ground Signals. It can also be used with the Pratt Truss Gantry kit (Ref 478) to provide over track signals. Glue and paints required to complete model.

After loading, open wagons were checked for height using this simple gauge to ensure that loads did not hit bridges etc. and therefore were usually placed near the yard exit. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Modelled on a hoist found at Plymouth Laira depot which is still in use today assisting with the maintenance of Locos and rolling stock. An Inspection Pit (Peco LK-56/156) was also often provided.The Rolling Underframe kit (Ref 546A) can be added to transform this unit into a movable crane. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 61mm wide, Span 90mm

Complements your Engine Shed (See Ratio Kit 203). Kit includes a rectangular water tower, water crane, coaling stage with coal staithes and hoist with buckets. Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 90mm x 30mm.

The kit comprises a coaling stage, water tower with crane, and a hoist for loading the coal. This model and the Engine Shed kit (Ref 522) make a good starting point for any layout in need of steam engine facilities. The Pecoscene Real Coal range (PS-330 -332) provides the perfect addition, as do the Pecoscene Ash and Cinder Scatter Materials (PS-320 - 322). An Inspection Pit (Peco LK-56/156) was also a common feature. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder PS-362 Coal Dust); glue is required to complete this model. Footprint: 140mm x 80mm

Based on an LNWR design, but useful for emulating wooden station building structures seen across the British Isles. Pack contains 4 Plain Board End Panels (47mm Wide by 53mm High). The modular design of this series (see also GJ02, 3 and 4) enables the construction of a tailor made building to suit the model location. Roofing (See the Wills Roofing Materials Pack SSMP229 Sheet and Batten Roofing and Ratio 516 Platform Valencing, Platform Canopy kits Ref Wills SS54 and Ratio 515), glue and paints are required to complete this model.

Based on an LNWR design, but useful for emulating wooden station building structures seen across the British Isles. Pack contains 4 Plain Board Panels (27mm Wide by 53mm High). The modular design of this series (see also GJ01, 2 and 3) enables the construction of a tailor made building to suit the model location. Roofing (See the Wills Roofing Materials Pack SSMP229 Sheet and Batten Roofing and Ratio 516 Platform Valencing, Platform Canopy kits Ref Wills SS54 and Ratio 515), glue and paints are required to complete this model.

Based on an LNWR design, but useful for emulating wooden station building structures seen across the British Isles. Pack contains 4 Single Door Panels (27mm Wide by 53mm High). The modular design of this series (see also GJ01, 2 and 4) enables the construction of a tailor made building to suit the model location. Roofing (See the Wills Roofing Materials Pack SSMP229 Sheet and Batten Roofing and Ratio 516 Platform Valencing, Platform Canopy kits Ref Wills SS54 and Ratio 515), glue and paints are required to complete this model.

Based on an LNWR design, but useful for emulating wooden station building structures seen across the British Isles. Pack contains 4 Window Panels (27mm Wide by 53mm High). The modular design of this series (see also GJ01, 3 and 4) enables the construction of a tailor made building to suit the model location. Roofing (See the Wills Roofing Materials Pack SSMP229 Sheet and Batten Roofing and Ratio 516 Platform Valencing, Platform Canopy kits Ref Wills SS54 and Ratio 515), glue and paints are required to complete this model.

This kit is modelled on the Midland Railway standard 4d box with characteristic hipped roof, and is based on the prototype at Swadlincote Junction, Leics. This timeless design lasted right up to the demise of mechanical signalling. Use the Ratio Signal Box Interior kit No. 224 for a 20 lever frame, level crossing wheel and other detail. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 42mm x 27mm (excluding steps).

Pack includes: 8 Large windows (20mm x 20mm), 2 Standard windows (9mm x 20mm) , and 6 Small (9mm x 14mm) classic Midland style signal box windows.

5 Steel type street lamps, 96mm high. Glue and paints required to complete model.

With it's fine scale latticework and curved section roof, this typical footbridge will add interest and a sense of importance to any model station. The versatile kit design means that the stairs can be assembled to face in either direction or straight off the end of the bridge. Moulded in 3 colours to make painting optional, the tooling of the fine lattice work sets the standard for injection moulding in this scale. Additional kits can be used to create multiple spans, whilst larger, busier stations often had 2 stairways to each platform, leading off in both directions. Could also be used without the roof sections at a large terminus under an overall station canopy. Glue is required to complete this model. Span: 93mm

Pack includes parts to make a pair of these Midland railway design bogies. Kit includes wheels and tension lock couplings; supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Single track crossing for a landowner whose property is on both sides of the railway line. Glue and paints required to complete model.

Oil depot for distribution of domestic oil, which was transferred to road vehicles to deliver to domestic customers. Kit includes hut, base , pipe fittings, catwalk, ladders and Esso transfers. The Peco Wonderful Wagons Petrol Tanker Kits R-75RD and R-75S kits can be used as delivery vehicles. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 180mm x 95mm

Oil depot for distribution of domestic oil, which was transferred to road vehicles to deliver to domestic customers. Kit includes hut, base and pipe fittings and can easily be extended by using the Ratio Kit 315 Oil Tanks. Glue and paints required to complete this model. Footprint 80mm x 25mm

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. These Oil tanks can be used to extend the Oil Depot (ref 228) or as a stand alone feature. Footprint: 80mm x 25mm

Suitable for extending the Oil Depot (Ref 529). The Peco Wonderful Wagons Petrol Tanker Kits R-75RD and R-75S kits can be used as delivery vehicles. Kit includes pipe fittings and base; c Footprint 95mm x 140mm

42 sacks, 10 pallets and 24 barrels. Glue and paints required to complete model.

30 sacks, 6 pallets and 4 barrels; useful for detailing around the Goods Shed (Ratio 534), Coal/Timber Merchants (Ratio 525), Provendor Store (Ratio 513) or station yard. Glue and paints required to complete model.

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm

A useful cover for passengers awaiting their train. Several kits can be combined to protect a long platform, they can also be used side by side. Glue and paints required to complete model. Footprint: 270mm x 52mm

Kit for 2 Platform Ramps to match Ratio Straight Platform Sections kit (Ref 209). Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 120mm x 40mm each.

Designed to be placed on a platform or as a ground level box, includes fire buckets and lamp. The Ratio Signal Box Interior kit 553 will provide a wealth of interior detail. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 65mm x 50mm

Stone edged platform with brick support will make up various combinations of platform; glue and paints required to complete model. See also Modelscene Station Staff 5059, Passengers Standing Sets A and B 5057 and 5058. Footprint: 480mm x 92mm

Kit contains parts to make a 240mm long and 40mm wide platform; easily extended by using further kits. Use Ratio Platform Ramps kit 210 with these platforms. Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Includes a lever, cord, screw eyes and return spring - everything you need to operate one turnout.

A Gantry to support signals, such as the semaphore signals in our Advanced Construction packs Ref 466 (GWR), 476(LMS), 477(LNWR) and 486(LNER/SR). It can also be used to mount colour light signals, and route and platform indicators. Glue and paints required to complete model.

A Gantry to support signals, such as the semaphore signals in our kits Ref 260, 262 and 270. It can also be used to mount colour light signals, and route and platform indicators. Glue and paints required to complete model.

The Southern Railway used these concrete sheds for storage of goods and animal feed. The characteristic short concrete piles raise the floor above ground level to keep out the damp and rodents. Glue and paints required to complete model. Footprint: 90mm x 70mm

This versatile building would contain a boiler to provide steam either for a pump raising water or to generate electricity for a small factory. Sometimes a short siding was provided alongside for coal deliveries. Kit includes the main building, brick chimney, water tank and outbuilding. Supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Footprint 95mm x 65mm

This versatile building would contain a boiler to provide steam either for a pump raising water or to generate electricity for a small factory. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 110mm x 90mm

Kit contains parts to make 12 Relay Boxes. Use with Concrete Trunking (Ref 258); supplied with pre-coloured parts although painting and/or weathering can add realism. Glue is required to complete this model.

Includes a lever, cord and screw eyes - everything you need to operate one signal.

Often seen supporting railway cuttings and embankments in urban areas where there is insufficient space for earth slopes. Make cuttings, yard walls or raised railway viaducts with these versatile sections. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Length 348mm, Height 35mm

Often seen supporting railway cuttings and embankments in urban areas where there is insufficient space for earth slopes. Make cuttings, yard walls or raised railway viaducts with these versatile sections. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Length 350mm, Height 45mm

The Wills scenic series provides a range of simple to make kits that help to change your layout into a model railway that contains real life detail. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Height 68mm.

To fit under the Ratio Locomotive Lifting Hoist (545) or Overhead Traversing Crane (546) to allow them to run along tracks (not included). The kit makes a pair of rolling underframes. Length 61mm.

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm

This common type of station water tower can be used either platform or ground mounted and is supplied with stove, drain, hose and etched ladder. The stove was used to stop the water freezing in the crane arm. Can also supply other platform mounted water cranes (Ratio Water Crane and Fire Devil Ref 212). Glue and paints required to complete model. Tank diameter:22mm.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains:
‚Ģ 1600mm of fencing
‚Ģ Includes road and rail gates.