• Fine plastic moulding with thinner¬†wagon body walls for accuracy.
• Interior detail as well as a high-level of exterior detail
• Separately-fitted brake lever.
• Brake shoes¬†in line with the¬†wheels
• Ultra-fine printing detail
• Free-running metal-tyred wheels
• Standard (removable) TT:120 coupler compatible with other TT:120 rolling stock on the market

• Fine plastic moulding with thinner¬†wagon body walls for accuracy.
• Interior detail as well as a high-level of exterior detail
• Separately-fitted brake lever.
• Brake shoes¬†in line with the¬†wheels
• Ultra-fine printing detail
• Free-running metal-tyred wheels
• Standard (removable) TT:120 coupler compatible with other TT:120 rolling stock on the market

• Fine plastic moulding with thinner¬†wagon body walls for accuracy.
• Interior detail as well as a high-level of exterior detail
• Separately-fitted brake lever.
• Brake shoes¬†in line with the¬†wheels
• Ultra-fine printing detail
• Free-running metal-tyred wheels
• Standard (removable) TT:120 coupler compatible with other TT:120 rolling stock on the market

• Fine plastic moulding with thinner¬†wagon body walls for accuracy.
• Interior detail as well as a high-level of exterior detail
• Separately-fitted brake lever.
• Brake shoes¬†in line with the¬†wheels
• Ultra-fine printing detail
• Free-running metal-tyred wheels
• Standard (removable) TT:120 coupler compatible with other TT:120 rolling stock on the market

• Fine plastic moulding with thinner¬†wagon body walls for accuracy.
• Interior detail as well as a high-level of exterior detail
• Separately-fitted brake lever.
• Brake shoes¬†in line with the¬†wheels
• Ultra-fine printing detail
• Free-running metal-tyred wheels
• Standard (removable) TT:120 coupler compatible with other TT:120 rolling stock on the market

• Fine plastic moulding with thinner¬†wagon body walls for accuracy.
• Interior detail as well as a high-level of exterior detail
• Separately-fitted brake lever.
• Brake shoes¬†in line with the¬†wheels
• Ultra-fine printing detail
• Free-running metal-tyred wheels
• Standard (removable) TT:120 coupler compatible with other TT:120 rolling stock on the market

• Fine plastic moulding with thinner¬†wagon body walls for accuracy.
• Interior detail as well as a high-level of exterior detail
• Separately-fitted brake lever.
• Brake shoes¬†in line with the¬†wheels
• Ultra-fine printing detail
• Free-running metal-tyred wheels
• Standard (removable) TT:120 coupler compatible with other TT:120 rolling stock on the market

• Fine plastic moulding with thinner¬†wagon body walls for accuracy.
• Interior detail as well as a high-level of exterior detail
• Separately-fitted brake lever.
• Brake shoes¬†in line with the¬†wheels
• Ultra-fine printing detail
• Free-running metal-tyred wheels
• Standard (removable) TT:120 coupler compatible with other TT:120 rolling stock on the market

Use SL-310 metal joiners and SL-1208 joining sleepers. Use SL-311 insulating joiners to create isolated track sections (if using DCC control these are not required).

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb flat bottom rail. The flexible sleeper base is detailed with fine wood grain and spikes through British Railways’ BR1 baseplates under the rails, a combination that continues to be widely used on Britain’s railways.

Code 55

Plastic kit, 4 buffer stops per pack.

A craft knife, needle files and liquid poly cement are required for construction.

For use with PECO TT:120 code 55 flexible track and turnouts.

The ends of sidings and bay platforms are usually terminated with a buffer stop to prevent rolling stock leaving the end of the track. When sidings are re-laid with flat-bottom rails, as represented by the PECO TT:120 range of code 55 flexible track and turnouts, often the original buffer stops made of bullhead rail would be re-used, along with the short length of track to which they are attached. examples of this can still be seen in various locations on Britain’s railway network.

Each kit includes 4 buffer stops, including 30mm lengths of dummy Bullhead track they are attached to. Each unit locates on the end of the track and needs to be glued to the baseboard.

Code 55

Use SL-310 metal joiners and SL-1208 joining sleepers. Use SL-311 insulating joiners to create isolated track sections (if using DCC control these are not required).

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb flat bottom rail. The flexible sleeper base is detailed with fine wood grain and spikes through British Railways’ BR1 baseplates under the rails, a combination that continues to be widely used on Britain’s railways.

Code 55

Use SL-310 metal joiners and SL-1208 joining sleepers. Use SL-311 insulating joiners to create isolated track sections (if using DCC control these are not required).

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb flat bottom rail. The flexible sleeper base is detailed with fine wood grain and spikes through British Railways’ BR1 baseplates under the rails, a combination that continues to be widely used on Britain’s railways.

Technical Specifications:

Length 180mm
Frog angle 11.25 degrees

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

Code 55

Use SL-310 metal joiners and SL-1208 joining sleepers. Use SL-311 insulating joiners to create isolated track sections (if using DCC control these are not required).

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb flat bottom rail. The flexible sleeper base is detailed with fine wood grain and spikes through British Railways’ BR1 baseplates under the rails, a combination that continues to be widely used on Britain’s railways.

Technical Specifications:

Length 135mm
Radius 466mm
Frog angle 11.25 degrees

Code 55

Use SL-310 metal joiners and SL-1208 joining sleepers. Use SL-311 insulating joiners to create isolated track sections (if using DCC control these are not required).

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb flat bottom rail. The flexible sleeper base is detailed with fine wood grain and spikes through British Railways’ BR1 baseplates under the rails, a combination that continues to be widely used on Britain’s railways.

Technical Specifications:

Length 135mm
Radius 466mm
Frog angle 11.25 degrees

Code 55

Unifrog

Use SL-310 metal rail joiners and SL-1208 joining sleepers.

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb rail, which continues to be widely used on Britain’s railways. The turnouts conform to NEM standards and the medium radius geometry is a close match to British Railways’ B6 standard.

Technical Specifications

Length - 180mm

Exit angle - 11.25¬?

Radius - Nominal 922.6mm/36.3"

Code 55

Unifrog

Use SL-310 metal rail joiners and SL-1208 joining sleepers.

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb rail, which continues to be widely used on Britain’s railways. The turnouts conform to NEM standards and the medium radius geometry is a close match to British Railways’ B6 standard.

Technical Specifications

Length - 180mm

Exit angle - 11.25¬?

Radius - Nominal 922.6mm/36.3"

Laser cut wooden kit with plastic chimney pot detail and glazing sheet.

A craft knife, needle files, glue (impact adhesive or PVA work well. Superglue can also be used apart from the glazing) and paints are required.

Stone-built country station building with canopy on the platform side. Based on West Bay in Dorset, originally built by the Bridport Railway and later absorbed by the Great Western Railway.

Technical Specifications

Length 115mm

Width 47mm Canopy projects 17mm

Laser cut wooden kit with plastic chimney pot detail and glazing sheet.

A craft knife, needle files, glue (impact adhesive or PVA work well. Superglue can also be used apart from the glazing) and paints are required.

Designed to fit over PECO TT:120 track (not included).

Small goods shed with siding running through it, based on Bovey in South Devon. The doors can be fixed in either open or closed position and the interior features detailed stonework, roof rafters, loading platform and goods office.

Technical Specifications

Length 100mm

Width 110mm

Laser cut wooden kit with plastic chimney pot detail and glazing sheet.

A craft knife, needle files, glue (impact adhesive or PVA work well. Superglue can also be used apart from the glazing) and paints are required.

A signalbox suitable for a small country station, based on Highley on the Severn Valley Railway (with thanks to the SVR for allowing access to measure it).

Technical Specifications

Length 65mm (including steps)

Width 32mm

Based on the familiar style of the Great Western Railway, these non-working plastic kits include pre-painted semaphore arms, an etched metal ladder and separate coloured spectacles for the signal arms themselves. Home/starter variants can be created from the LK12141, or both a home and distant signal on the one post. The fine mouldings, once assembled and painted, create a lovely, characterful model of these iconic signals.

Based on the familiar style of the Great Western Railway, these non-working plastic kits include pre-painted semaphore arms, an etched metal ladder and separate coloured spectacles for the signal arms themselves. Home/starter variants can be created from the LK12141, or both a home and distant signal on the one post. The fine mouldings, once assembled and painted, create a lovely, characterful model of these iconic signals.

Based on the familiar style of the Great Western Railway, these non-working plastic kits include pre-painted semaphore arms, an etched metal ladder and separate coloured spectacles for the signal arms themselves. Home/starter variants can be created from the LK12141, or both a home and distant signal on the one post. The fine mouldings, once assembled and painted, create a lovely, characterful model of these iconic signals.

Laser cut wooden kit with plastic chimney pot detail.

A craft knife, needle files, glue (impact adhesive or PVA work well. Superglue can also be used apart from the glazing) and paints are required.

The lineside hut kits contains components for two buildings. Carefully designed and thought through, these kits are a delight to build.

 

A craft knife, files and liquid poly cement are required to for assembly

Use with LK-12103 and LK-12104 platform edging and LK-12105 and LK-12106 platform ramp edges.

The TT:120 platform system comprises a variety of styles of platform edging, ramp edges and surfaces that can be used to create platforms of any size and shape. Platform edging designed for use alongside PECO TT:120 track and considers the height of the sleepers, resulting in an accurate platform 3 scale feet from the railhead. The platform surface sheets can also be used for scratch building structures and buildings.

Technical Specifications

5 sheets 133m x 76mm, nominally 1mm thick.

A craft knife, files and liquid poly cement are required to for assembly

Use with LK-12103 and LK-12104 platform edging and LK-12105 and LK-12106 platform ramp edges.

The TT:120 platform system comprises a variety of styles of platform edging, ramp edges and surfaces that can be used to create platforms of any size and shape. Platform edging designed for use alongside PECO TT:120 track and considers the height of the sleepers, resulting in an accurate platform 3 scale feet from the railhead. The platform surface sheets can also be used for scratch building structures and buildings.

Technical Specifications

5 sheets 133m x 76mm, nominally 1mm thick.

A craft knife, files and liquid poly cement are required to for assembly

Use with LK-12103 Brick platform edges and LK-12107 Brick paviours or LK-12108 concrete surface.

The TT:120 platform system comprises a variety of styles of platform edging, ramp edges and surfaces that can be used to create platforms of any size and shape. Platform edging designed for use alongside PECO TT:120 track and considers the height of the sleepers, resulting in an accurate platform 3 scale feet from the railhead.

Technical Specifications

2 handed pairs, each ramp 75mm long

A craft knife, files and liquid poly cement are required to for assembly

Use with LK-12106 Stone ramps and LK-12107 Brick paviours or LK-12108 concrete surface.

The TT:120 platform system comprises a variety of styles of platform edging, ramp edges and surfaces that can be used to create platforms of any size and shape. Platform edging designed for use alongside PECO TT:120 track and considers the height of the sleepers, resulting in an accurate platform 3 scale feet from the railhead.

Technical Specifications

6 pieces, each 133mm long

A craft knife, files and liquid poly cement are required to for assembly

Use with LK-12103 Brick platform edges and LK-12107 Brick paviours or LK-12108 concrete surface.

The TT:120 platform system comprises a variety of styles of platform edging, ramp edges and surfaces that can be used to create platforms of any size and shape. Platform edging designed for use alongside PECO TT:120 track and considers the height of the sleepers, resulting in an accurate platform 3 scale feet from the railhead.

Technical Specifications

2 handed pairs, each ramp 75mm long

A craft knife, files and liquid poly cement are required to for assembly

Use with LK-12104 Stone platform edges and LK-12107 Brick paviours or LK-12108 concrete surface.

The TT:120 platform system comprises a variety of styles of platform edging, ramp edges and surfaces that can be used to create platforms of any size and shape. Platform edging designed for use alongside PECO TT:120 track and considers the height of the sleepers, resulting in an accurate platform 3 scale feet from the railhead.

Technical Specifications

2 handed pairs, each ramp 75mm long

The NEW TT:120 Laser-Cut Wooden Platform Shelter.

A craft knife, needle files, glue (impact adhesive or PVA work well. Superglue can also be used apart from the glazing) and paints are required.

The platform shelter model replicates a typical style constructed, appropriately, in wood.