SORT BY
PAGE

37 Products Found

Bullhead Buffer Stop, Rail-built

Most buffer stops of the period prior to the 1970s were constructed from spare bullhead rail and these new mouldings contain plenty of detail such as bolt heads and the bullhead profile of the rail. The design has also accounted for the option of an alternative buffer for EM gauge.

There are enough parts in the kit for two buffer stops. Designed to clip onto the bullhead rail profile, this easy-to-assemble kit will be simplicity itself to install. 

Starter Track Set

This pack contains:

  • 6 x ST-401 Standard Straights
  • 2 x ST-411 Double Straights
  • 1 x ST-413 Double Straight (Wired)
  • 5 x ST-403 1st Radius Standard Curves
  • 6 x ST-412 1st radius Double Curves
  • 1 x ST-405 Right Hand Turnout
  • 1 x ST-406 Left Hand Turnout
  • 2 x SL-440 Buffer Stops
  • 1 x OO-9 Planbook

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track. This rigid track system is particularly useful on small layouts with tight curves, and is fully compatible with the 009 Streamline track system.

Turnout (Mainline Sleepers), Medium Radius, Left Hand

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range emulates many narrow gauge lines found around Europe which are built to main line standards. It is compatible with the Peco 009 Setrack rigid track system. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.

Turnout (Mainline Sleepers), Medium Radius, Right Hand

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range emulates many narrow gauge lines found around Europe which are built to main line standards. It is compatible with the Peco 009 Setrack rigid track system. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.

Y Turnout, Medium Radius

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range depicts the slightly worn out old track of a picturesque old railway. It is fully compatible with the Peco 009 Setrack rigid track system. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.

Turnout (Irregular Sleepers), Small Radius, Left Hand

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range depicts the slightly worn out old track of a picturesque old railway. It is compatible with the Peco 009 Setrack rigid track system. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.

Turnout (Irregular Sleepers), Small Radius, Right Hand

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range depicts the slightly worn out old track of a picturesque old railway. It is compatible with the Peco 009 Setrack rigid track system. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.

Flexible Track Irregular Sleeper

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range depicts the slightly worn out old track of a picturesque old railway. It is fully compatible with the Peco 009 Setrack rigid track system.

Double Straight

A Double Straight with soldered power feeds. For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track. This rigid track system is particularly useful on small layouts with tight curves, and is fully compatible with the 009 Streamline track system. The ST-413 is a double straight which has been pre wired to allow power to be easily delivered to the track with power feeds ready soldered to the rails - easily extended using PL-39 Terminal Blocks and PL-38 Red and Black Wire.

Buffer Stop

Moulded in one piece and ready to use. Slots locate the unit correctly onto the track. PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Straight Level Crossing

The Setrack Level Crossings can be positioned virtually anywhere on your layout. There are four radii available in curved crossings, plus the straight crossing and add on unit . These simply clip together so that you can cross up to four tracks on a curve and any number of tracks on the straight. They are supplied with traditional gates as standard, LK-51 modern barriers can be substituted if required.

PECO Setrack 00 Gauge Code 100 - Unit trackage System is a high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Standard Curve, 1st Radius

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track. This rigid track system is particularly useful on small layouts with tight curves, and is fully compatible with the 009 Streamline track system.

PAGE

Trade Login

WOULD YOU LIKE TO BECOME A TRADE PARTNER?

PECO - PLEASE SUPPLY TEXT.
An introductory paragraph with criteria listed as bullets points, closing with contact call to action.