Code 55

Use SL-310 metal joiners and SL-1208 joining sleepers. Use SL-311 insulating joiners to create isolated track sections (if using DCC control these are not required).

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb flat bottom rail. The flexible sleeper base is detailed with fine wood grain and spikes through British Railways’ BR1 baseplates under the rails, a combination that continues to be widely used on Britain’s railways.

Concrete sleeper track has been in use on the railways of Britain since around 1940, usually combined with wooden sleeper turnouts and crossings, and this track is a faithful representation of this design.

If you wish to mix wheel standards on your 00/H0 layout, this is the trackage to choose. Code 100 rail allows flange depths up to 1.6mm which means that both vintage and current stock will run happily together. The wide range of turnouts and crossings in this series includes every type, and the geometry of this range has been cleverly designed to make it easy to build convenient, complex and aesthetically pleasing formations.

These turnouts emulate the modern style of concrete sleepered trackwork which features Pandrol (TM) style rail fixings. Concrete sleepered turnouts had previously been impractical due to the concrete being broken by the impact caused as wheels passed through the frog area. This has been resolved by redesigning the frog so that the flange supports the wheel across the gap in the running rail.

Peco Streamline Code 75 track meets the standards of enthusiasts who prefer to run trains on scale height rail. Today most manufacturers' wheels are suitable for use on Code 75 track but some vintage models may have flanges which are too deep to clear the rail fixings. Code 75 can be easily combined with code 100 track by using the SL-113 Transition Track.

The wide range of turnouts and crossings in this series includes every type, and the geometry of this range has been cleverly designed to make it easy to build convenient, complex and aesthetically pleasing formations using combinations of small, medium and large radius turnouts and crossings. Layout plans suggestions can be found in our publications ‘Track Plans for Layouts to Suit all Locations’ (Ref PM-202), ‘60 Plans for Small Railways’ (Ref no PB-3), and ‘Track Plans for Various Locations’ (Ref no PB-66).

For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.

For use between sections of Code 100 and Code 75 track, so for example could be used to incorporate a Code 75 Asymmetric 3- way Turnout (SL-E199) into a Code 100 layout, or to connect a Code 100 Streamline or Setrack 'fiddle yard' to a Code 75 scenic section.

Normally conductive; although the electrical connections between the 2 rail types can be cut to provide an electrical break. Supplied in a pack of 4.

Bullhead track has been in use on the railways since the earliest times, and is still very much in evidence today. This flexible track provides a highly detailed and faithful 00 scale replication of this long standing feature of Britain's railways.

Our SL-114 Bullhead Rail Joiners include bolt detail and therefore complement the fine detail of this track range.

The PECO Streamline OO Bullhead track range has shaped up to be a very comprehensive system comprising flexible track, bullhead joiners, buffer stop, large radius, medium radius turnout, a crossing, double & single slips, Y turnouts and now Small Radius Turnouts. There's enough there already for modellers to build a truly authentic steam-to-diesel transition period layout.

• PECO Streamline OO Bullhead Small Radius Turnout, Unifrog
• Shares the same geometry as the existing Streamline Code 100, 75 flat bottom tracks systems
• Compatible with existing Bullhead system
• Uses standard SL-110 Code 75 rail joiner or the SL-114 Bullhead rail joiner
• Length 185mm
• Radius 610mm
• Frog angle 12 degrees
• Unifrog
• High quality nickel silver rail for all rail parts, for optimal electrical conductivity
• An excellent track component where space restrictions prevent standard turnouts being used.

The PECO Streamline OO Bullhead track range has shaped up to be a very comprehensive system comprising flexible track, bullhead joiners, buffer stop, large radius, medium radius turnout, a crossing, double & single slips, Y turnouts and now Small Radius Turnouts. There's enough there already for modellers to build a truly authentic steam-to-diesel transition period layout.

• PECO Streamline OO Bullhead Small Radius Turnout, Unifrog
• Shares the same geometry as the existing Streamline Code 100, 75 flat bottom tracks systems
• Compatible with existing Bullhead system
• Uses standard SL-110 Code 75 rail joiner or the SL-114 Bullhead rail joiner
• Length 185mm
• Radius 610mm
• Frog angle 12 degrees
• Unifrog
• High quality nickel silver rail for all rail parts, for optimal electrical conductivity
• An excellent track component where space restrictions prevent standard turnouts being used.

This track models the most common form of concrete sleepering in use in Britain today, with flat bottom rail.

The concrete sleeper detail in SL-303 is vastly improved from the previous SL-302 (now discontinued), with a more prototypical sleeper/tie profile, better representation of the Pandrol-style rail clip and even the manufacturer's name embossed on the surface. Flexible track with nickel silver rail, length 36 inches, 914mm. Supplied in cartons of 25.

N.B Compatible with the existing N scale Code 80 track system, it is also worth reminding that the Code 80 and Code 55 track systems are able to be connected together without the need to compensate for the change in rail height thanks to the clever design of the rail profile and base mouldings of the Code 55 system. The standard SL-310 and SL-311 rail joiners are used for both systems.

The PECO Streamline OO Bullhead track range has shaped up to be a very comprehensive system comprising flexible track, bullhead joiners, buffer stop, large radius, medium radius turnout, a crossing, double & single slips and now Y turnouts. There's enough there already for modellers to build a truly authentic steam-to-diesel transition period layout.

• PECO Streamline OO Bullhead Large Radius Y Turnout, Unifrog
• Shares the same geometry as the existing Streamline Code 100, 75 flat bottom tracks systems
• Compatible with existing Bullhead system
• Uses standard SL-110 Code 75 rail joiner or the SL-114 Bullhead rail joiner
• Length 220mm, 8.7 inches
• Radius 1829mm, 72 inches
• Frog angle 12 degrees
• Unifrog
• High quality nickel silver rail for all rail parts, for optimal electrical conductivity
• One-piece machined point blade
• Over-centre spring to lock the point blade in place
• An excellent track component where space restrictions prevent standard turnouts being used, such as in a goods yard.

Whilst our HO Code 83 track is perfect for modelling American mainlines, this new Code 70 track is just right for secondary lines, lightly-used branches, sidings, etc. Indeed, it will be perfect for modelling the early-to-mid 20th century railroading era when lighter rail was more commonly used. Featuring accurate rail spike detail, correctly proportioned ties (sleepers) and nickel silver rail, this new flexible track has been produced to the same high standard that modellers have come to expect from PECO and confirms to the specifications laid down by the NMRA..

Whilst our HO Code 83 track is perfect for modelling American mainlines, this new Code 70 track is just right for secondary lines, lightly-used branches, sidings, etc. Indeed, it will be perfect for modelling the early-to-mid 20th century railroading era when lighter rail was more commonly used. Featuring accurate rail spike detail, correctly proportioned ties (sleepers) and nickel silver rail, this new flexible track has been produced to the same high standard that modellers have come to expect from PECO and confirms to the specifications laid down by the NMRA..

The NEW Unifrog Conversion

The latest conversion to Unifrog is now available. This time we have updated the Streamline OO/HO scale Code 100 Small Radius "Y" turnout to conform to this new format. Produced from brand new tooling this replaced the former Insulfrog and Electrofrog SL-97 and SL-E97 (both of these are now discontinued and out of stock).

Y Turnouts are really useful track components - their main benefit being as great space-savers. By combining the Y with the short crossing you can create a tight radius double junction and using several Ys together allows you to fit more routes in a restricted space. Ideal when building small loco yards and goods sidings. It's what the real railways would have done after all! 

The Unifrog Conversion

On a Unifrog turnout the frog tip and wing rails are electrically isolated from all other rails. The turnout can be used as supplied on a DC or DCC layout without any modification, using the standard SL-10 rail joiner. If desired, the frog tip and wing rails can be powered by connecting the wire welded underneath to a changeover switch or microswitch working in unison with one of our turnout motors. Basically, as supplied the turnout operates as an Insulfrog turnout. If the frog is powered then it operates as an Electrofrog turnout. So, the best of both worlds in one unit!