SORT BY

35 Products Found

TT:120 Additional Wooden Sleeper

Use SL-310 metal joiners and SL-1208 joining sleepers. Use SL-311 insulating joiners to create isolated track sections (if using DCC control these are not required).

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb flat bottom rail. The flexible sleeper base is detailed with fine wood grain and spikes through British Railways’ BR1 baseplates under the rails, a combination that continues to be widely used on Britain’s railways.

Code 55

TT:120 Buffer Stop, Rail type

Plastic kit, 4 buffer stops per pack.

A craft knife, needle files and liquid poly cement are required for construction.

For use with PECO TT:120 code 55 flexible track and turnouts.

The ends of sidings and bay platforms are usually terminated with a buffer stop to prevent rolling stock leaving the end of the track. When sidings are re-laid with flat-bottom rails, as represented by the PECO TT:120 range of code 55 flexible track and turnouts, often the original buffer stops made of bullhead rail would be re-used, along with the short length of track to which they are attached. examples of this can still be seen in various locations on Britain’s railway network.

Each kit includes 4 buffer stops, including 30mm lengths of dummy Bullhead track they are attached to. Each unit locates on the end of the track and needs to be glued to the baseboard.

Concrete Sleepers

60 concrete effect sleepers for track construction using Code 143 Flat Bottom rail.

Turnout Blades/Brackets

1 set of Turnout Blades and Brackets for the construction of turnouts, using Code 143 Flat Bottom rail.

Running Rail Chairs

60 injection moulded chairs for the construction of turnouts and plain track, using Code 250 Flat Bottom rail.

Slide Rail Chairs

30 injection moulded chairs for the construction of turnouts, using Code 250 Flat Bottom rail.

Frog and Check Rail Kit

1 set of Frog and Wing Rails for the construction of turnouts, using Code 250 Flat Bottom rail.

Wood Grain Sleepers

12 Sleepers approx 125mm long plus 12 end caps for track and turnout construction.

Code 250 Flat Bottom Rail

6 914mm lengths of Code 250 Flat Bottom Rail for track and turnout construction.

Code 83 Flat Bottom Rail

6 914mm lengths of Code 83 Flat Bottom Rail for track and turnout construction.

Code 200 Bullhead Rail

6 914mm lengths of Code 200 Bullhead Rail for track and turnout construction.

Code 143 Flat Bottom Rail

6 914mm lengths of Code 143 Flat Bottom Rail for track and turnout construction.

Code 124 Bullhead Rail

6 914mm lengths of Code 124 Bullhead Rail for track and turnout construction.

Wood Grain Sleepering

20 175mm lengths of wood grain effect sleepering for track and turnout construction.

Slide Rail Fastenings (Pack of 48)

50 injection moulded chairs for the construction of turnouts, using Code 143 Flat Bottom rail.

Pandrol Rail Fastenings (Pack of 100)

100 injection moulded rail clips on baseplates for the construction of turnouts and plain track, using Code 143 Flat Bottom rail.

Frog, Wing and Check Rails

1 set of Frog and Wing Rails for the construction of turnouts, using Code 143 Flat Bottom rail.

Turnout Blades/Brackets

1 set of Turnout Blades and Brackets for the construction of turnouts, using Code 124 Bullhead rail.

Frog and Wing Rails

1 set of Frog and Wing Rails for the construction of turnouts, using Code 124 Bullhead rail.

Slide Rail Chairs

50 injection moulded chairs for the construction of turnouts, using Code 124 Bullhead rail.

Running Rail Chairs

100 injection moulded chairs for the construction of turnouts and plain track, using Code 124 Bullhead rail.

Code 70 Flat Bottom Rail

Individulay components for building track.

Code 100 Flat Bottom Rail

Individulay components for building track.

Code 80 Flat Bottom Rail

Individulay components for building track.

Code 75 Flat Bottom Rail

Individulay components for building track.

Rail Spikes

Square section (non turning) rail spikes, for fixing down rail.

Concrete Sleepers

96 sleepers 32mm long and 3.5mm wide at base (3mm at top) with 200 separately moulded rail fixings. Moulded in realistic concrete colour plastic, the rigid 6 sleeper units enable straight track to be accurately and easily laid. For curved track simply cut the webs joining the sleepers on one side. Assemble using the Peco 3- Way Track Gauge (IL-116) and liquid styrene cement.

Conductor Rail Chairs

For adding 3rd and 4th Conductor rails to existing track as found on Southern, Merseyside and London Transport systems, for example. Use IL-1 Code 60 rail with these chairs

16.5, 18.2 and 18.83mm Track Gauge

Track gauge for 16.5,18.2 and 18.83mm gauges.

Turnout Sleepers

Approx. 32 brown moulded plastic sleepers lengths each 88mm x 4mm. Superb components with which to build your own fine track and turnouts to 16.5mm, 18.2mm and 18.83mm gauges.

Slide Rail Fixings

These rail fixings (approx. 42) slide on to Code 82 Flat Bottom Profile Rail. Assemble using the Peco 3- Way Track Gauge (IL-116) and liquid styrene cement.

Pandrol Rail Fixings

These Pandrol (TM) clips are faithfully reproduced in 4mm scale, complete with Lockspike (TM) detail. Assemble using the Peco 3- Way Track Gauge (IL-116) and liquid styrene cement.

Wooden Sleepers

Approx. 96 brown moulded plastic sleepers each 33.5mm x 3.5mm. Superb components with which to build your own fine track and turnouts to 16.5mm, 18.2mm and 18.83mm gauges.

Track Nails Brass

Brass nails for fixing track which also have many other uses.

Code 60 Flat Bottom Rail

Individulay components for building track. Also used for adding 3rd and 4th Conductor rails to existing track as found on Southern, Merseyside and London Transport systems, for example. Use IL-120 Conductor Rail Chairs with this rail.

Trade Login

WOULD YOU LIKE TO BECOME A TRADE PARTNER?

PECO - PLEASE SUPPLY TEXT.
An introductory paragraph with criteria listed as bullets points, closing with contact call to action.