BROWSE PECO PRODUCTS
Browse through our complete product portfolio.
1003 Products Found
Wagon Load Kit - Sand
All kits comprise a bag of load material, such as coal or sand, plus sections of board that are cut to size to fit the desired wagon. The modeller, using a PVA adhesive, secures the materials on the cut boards and places the load inside the wagon for instant effect. The additional benefit, apart from the realism, is that some valuable weight is added to what might otherwise be a very light vehicle. Especially useful in an N scale wagon!
The N scale kits contain enough material for up to 6 wagons. Full instructions are provided in the packs.
Wagon Load Kit OO/HO - Coal
All kits comprise a bag of load material, such as coal or sand, plus sections of board that are cut to size to fit the desired wagon. The modeller, using a PVA adhesive, secures the materials on the cut boards and places the load inside the wagon for instant effect. The additional benefit, apart from the realism, is that some valuable weight is added to what might otherwise be a very light vehicle.
The OO/HO scale kits contain enough material for up to 3 wagons. Full instructions are provided in the packs.
Wagon Load Kit OO/HO - Coke
All kits comprise a bag of load material, such as coal or sand, plus sections of board that are cut to size to fit the desired wagon. The modeller, using a PVA adhesive, secures the materials on the cut boards and places the load inside the wagon for instant effect. The additional benefit, apart from the realism, is that some valuable weight is added to what might otherwise be a very light vehicle.
The OO/HO scale kits contain enough material for up to 3 wagons. Full instructions are provided in the packs.
Wagon Load Kit OO/HO - Granite
All kits comprise a bag of load material, such as coal or sand, plus sections of board that are cut to size to fit the desired wagon. The modeller, using a PVA adhesive, secures the materials on the cut boards and places the load inside the wagon for instant effect. The additional benefit, apart from the realism, is that some valuable weight is added to what might otherwise be a very light vehicle.
The OO/HO scale kits contain enough material for up to 3 wagons. Full instructions are provided in the packs.
Wagon Load Kit OO/HO - Iron Ore
All kits comprise a bag of load material, such as coal or sand, plus sections of board that are cut to size to fit the desired wagon. The modeller, using a PVA adhesive, secures the materials on the cut boards and places the load inside the wagon for instant effect. The additional benefit, apart from the realism, is that some valuable weight is added to what might otherwise be a very light vehicle.
The OO/HO scale kits contain enough material for up to 3 wagons. Full instructions are provided in the packs.
Wagon Load Kit OO/HO - Limestone
All kits comprise a bag of load material, such as coal or sand, plus sections of board that are cut to size to fit the desired wagon. The modeller, using a PVA adhesive, secures the materials on the cut boards and places the load inside the wagon for instant effect. The additional benefit, apart from the realism, is that some valuable weight is added to what might otherwise be a very light vehicle.
The OO/HO scale kits contain enough material for up to 3 wagons. Full instructions are provided in the packs.
Wagon Load Kit OO/HO - Sand
All kits comprise a bag of load material, such as coal or sand, plus sections of board that are cut to size to fit the desired wagon. The modeller, using a PVA adhesive, secures the materials on the cut boards and places the load inside the wagon for instant effect. The additional benefit, apart from the realism, is that some valuable weight is added to what might otherwise be a very light vehicle.
The OO/HO scale kits contain enough material for up to 3 wagons. Full instructions are provided in the packs.
Walled Seating Area with Notice Board
Figure not included.
Size approx (mm) L100 x W65 x H20. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.
Waney, Edge Boarding
These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.
War Memorial
As a poignant reminder of our nation's history, most cities, towns and villages have a memorial to their fallen heroes. This two part model has a 1st World War soldier figurine in his Great Coat, head bowed and with rifle reversed, standing atop a stone pillar. Geranium borders surround three sides and a poppy wreath rests at the foot of the plinth.
Size (mm) 56 x 56 x 56. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.
War Memorial 1914-1918
This monument commemorates The Great War of 1914-18. With carved low relief military figures on 3 sides, the front panel features a large golden wreath with 1914-18 embossed in gold beneath it. A small wreath of poppies completes the front of this poignant memorial. Size approx (mm) 40 x 40 x 60. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.
Water Crane
Usually supplied by a water tower (See LK-1, Ratio 506, 540, 551 and Wills SS34 kits).
Water Crane and Fire Devil
Stations often had these Water Cranes at the end of the platforms so the locomotives could be refilled without detaching them from the train. Also included is a coke brazier, called a 'fire devil' to keep the cast iron pipe from freezing up during the winter. These cranes were usually supplied by a large water tank (see Ratio Water Tower kits 215, 256 and Loco Servicing Depot kit 206). Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
Water Crane and Fire Devil
Stations often had these Water Cranes at the end of the platforms so the locomotives could be refilled without detaching them from the train. Also included is a coke brazier, called a 'fire devil' to keep the cast iron pipe from freezing up during the winter. These cranes were usually supplied by a large water tank (see Ratio 506 and 551 and Wills SS34 kits). Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
Water Meadow Grass Tuft Strips 10mm High Self Adhesive
10 6mm high self adhesive Water Meadow Grass tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.
Water Meadow Photographic Backscene
Supplied in a square-section tube, the three separate sheets will match perfectly together to form a continuous run of 2400mm (95in), and reaching to a height of 333mm (13in). Future backscenes will match at either end allowing longer runs of scenery throughout the full length of a layout.
Water Mill
The Craftsman series from Wills offers the more experienced modeller a cost effective way to make large, highly individual models. They cover a range of typically British buildings both railway and domestic; each kit includes plastic moulded materials sheets, detailed parts, illustrated instructions and templates. The use of sheet materials rather than moulded parts for the main components allows the opportunity to easily modify the design to suit your needs. Should you wish to extend the building the same materials sheets are available separately (see the Wills Materials Pack range). Similarly it would be easy to add additional doors and/or windows if required.
Water Tower
A fairly universal design seen at many steam loco depots. The kit includes water gauge, water crane, fire buckets and lamp. Use the Ratio 413 Water Crane and Fire Devil kit if further cranes are required. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 90mm x 60mm
Water Tower
Often seen in the loco yard or near the platform end. Use LK-2 Water Cranes if additional cranes are required.
Water Tower and Stone Base
A raised water supply for an engine shed or to supply platform water cranes (See Ratio 413 and Peco LK-2 Water Cranes, also Ratio 550 Water Troughs). Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 66mm x 55mm.
Water Tower, GW Pillar
Water towers with cranes were generally used on platforms and in other areas with restricted space. This kit will build either a tower with a flat top or the familiar GWR conical type. Includes stove, water crane etc. as well as etched brass chain and ladder; glue and paints required to complete model. Use the Ratio Water Crane and Fire Devil Kit 413 if further cranes are required.
Water Trough
A essential feature on steam era main lines for over 100 years; this kit contains parts to make 370mm of troughs and includes relevant signboards. Use in conjunction with the Large Water Tower (Ref 256). Glue and paints are required to complete this model.
Water Trough
A essential feature on steam era main lines for over 100 years; this kit contains parts to make 760mm of troughs and includes relevant signboards. Use in conjunction with the large Water Tower (Ref 551). Glue and paints are required to complete this model.
Water Wheel and Sluice Gates
Enables you to make a building into a water mill. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.