Apex canopy with valancing, stanchions and girders. The glazed sections can be placed at will. Although typical of GWR designs, this canopy can be used for almost any railway company. Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 200mm x 43mm

Pack contains 20 Assorted Unpainted Figures

Pack contains 20 Assorted Unpainted Figures

Detailed moulding of the ramp/protective cover for the Automatic Warning System used on British railway routes. This dummy unit will add realism to your trackwork.

Moulded foam ballast inlay in a realistic brown colour. Moulded units fit Turnouts and Crossings, and rolls are available for plain track (Streamline and Setrack). This inlay system adds extra realism as well as giving quieter, smoother running. Suitable for Code 80 and Code 55 track.

Pack contains 12 Bicycles (Unpainted).

This model platform system is ideal for use with Peco N Setrack, Streamline and any other unit trackage system which conforms to the same geometry. The two sections in this pack make a 288mm long platform plus ramps; it can easily be extended by simply clipping in additional ST-93 Brick type platform units. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of three widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the Setrack curve.

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm

Plastic sheet emulating Blue Engineering Brick. Pack of 4

Pair of detailed Bridge sides, with separate wings walls for optional positioning. Matching Stone Walling is also available (NB-40).

Pair of detailed Bridge sides, with separate wings walls for optional positioning. Matching Stone Walling is also available (NB-40).

Detailed model of the standard British Railways type. Three plastic moulded parts which, after assembly, clip onto the rails (2 per pack).

Pack contains 2 bus stops with shelters and 6 signs.

Pack contains 2 pre-coloured Cable Drums

Pack contains 3 painted figures and cable drum

These were a common feature in sidings where repairs, cleaning and maintenance were effected. This shed will cover 2 tracks and can easily be extended; the kit includes guttering and centre walkway. A versatile kit with many uses both on and off the railway. Glue and paints required to complete model. Footprint 178mm x 60mm.

Pack contains 3 pre-coloured Cars

A common feature of country stations large and small, whilst market town cattle docks could be very large indeed. Our model is of the one at Yeovil Pen Mill (GWR) Station, Somerset. Livestock (See Modelscene Cows Ref. 5179, Sheep and Lambs Ref. 5177, Pigs Ref. 5176, and Horses Ref. 5178) was conveyed on British railways until around 1973, although many cattle docks remained in place unused, becoming overgrown - an interesting scenic feature. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 90mm x 55mm

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. This pack contains the parts for 2 Large (10mm x 7mm), and 2 Small (5mm x 6mm) Chimney Stacks

In the days when everything came by rail, even the smallest goods yard would provide a facility for the local coal merchant next to a siding. This kit can easily be extended by adding more staithes using Ratio Coal Staithes kit 316. Glue and paints required to complete this model. Footprint 66mm x 23mm

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. These Coal Staithes can be used to extend the Coal Depot (ref 229) or as a stand alone feature. Footprint: 36mm x 23mm

Many merchants had private sidings where they could be supplied directly by rail. This kit includes office, loading platform, hoist and can be constructed in a number of ways. The Peco range of wagon loads (e.g. NR-203 Timber Loads) for 10 and 15 ft. wagons provide realistic deliveries to these types of premises. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 85mm x 60mm

These towers are an impressive sight and were an essential feature on mainline railways. The Pecoscene ranges provide the perfect loading materials, Real Coal (PS-330 -332), Limestone (PS-342 and 3), Sand (PS-344), Iron Ore (PS-340), Grey Stone (PS-300- 307), and Brown Stone (PS-310 - 317) for a quarry, mine or pit loading hopper. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint: 64mm x 50mm, Height 95mm

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm