Extension pack for the SS80 Viaduct kit. 141mm Long, 124mm Wide and 234mm High. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Can be extended by adding additional kits and the SS83 Piers, or with the SS81 Extra Arch and Pier. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 423mm Long, 124mm Wide and 234mm High.

This single track crossing features one of the many different types of gates used where roads had to cross the railway on the level. Kit includes 1 pair of gates 95mm x 17mm, plastic cobblestone roadway and a planked crossing deck.Don't forget the crossing keepers box (SS29), Signal Box (SS48), or Cottage (SS39). Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

The platelayers who maintained the track used huts like these for storing tools, shelter - and, of course, for somewhere to make a brew! Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 58mm x 44mm.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit includes:
‚Ģ 20 24mm wide Concrete Fencing panels including post
‚Ģ 20 22mm wide Ornate Concrete Fencing panels including post
‚Ģ 20 22mm wide Concrete Balustrade Fencing panels including post
‚Ģ 20 22mm wide Concrete Post and Rail panels including post
‚Ģ 8 24mm wide Double Gates including 2 posts
‚Ģ 8 14mm wide Single Gates Including 2 posts

Underpass for double track to be used by farm and light traffic; stone abutments included. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Span 70mm

A small signal box as would be seen at a small country station, or controlling the exit from a yard or industrial area. Use SS89 Point Rodding to fill in this important detail on your layout. Footprint:48mm x 36mm.

Commercial vehicles arriving with goods to transport by rail were weighed to work out their levy. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 82mm x 81mm

Kit includes 6 pit mouldings (total length 297mm), 2 pairs of steps and 4 walkway plates. The modular design makes it easy to assemble pits of any length. With several kits you can model the train length pits seen at many maintenance depots; a great addition to the LK-80 Modern Train Shed unit or create a modern diesel/EMU servicing shed using the Wills SSM300 Modern Industrial Building and SSM315 Extension kits.

1 set of Frog and Wing Rails for the construction of turnouts, using Code 200 Flat Bottom rail.
Gauge One models are built to a scale of 10mm/foot, or approx 1:30 scale. This is a great scale for live steam locomotives, or electric and internal combustion models. This scale is often used in the great outdoors, however, indoor scenic layouts are not unknown.

50 injection moulded chairs for the construction of turnouts, using Code Flat Bottom rail. Gauge One models are built to a scale of 10mm/foot, or approx 1:30 scale. This is a great scale for live steam locomotives, or electric and internal combustion models. This scale is often used in the great outdoors, however, indoor scenic layouts are not unknown.

These rail fixings (approx. 100) slide on to Code 200 Flat Bottom Profile Rail. Gauge One models are built to a scale of 10mm/foot, or approx 1:30 scale. This is a great scale for live steam locomotives, or electric and internal combustion models. This scale is often used in the great outdoors, however, indoor scenic layouts are not unknown.

Detailed model of the standard British Railways type. Three plastic moulded parts which, after assembly, clip onto the rails. Peco Streamline Bullhead 0 Gauge track has set unsurpassed standards for 7mm scale realism. Superbly detailed, its 'wood grain' sleepers are the correct scale width and have integrally moulded scale chairs with square headed fixing bolts and wooden keys. This range is compatible with the 0 Setrack range; and if, as on the real network, you wish to use a combination of Bullhead and Flat Bottom track the SL-713 Transition Track provides an ideal way to connect the two types.

Makes it easy to connect Peco 0 Streamline and Setrack Bullhead to Streamline Flatbottom track.

Pack contains 4 x 66mm track sections. Electrical conductivity is maintained across the joint but an insulation break can be made if required.

Peco Streamline Flat Bottom 0 Gauge track is superbly detailed, with correct scale width 'wood grain' sleepers and integrally moulded baseplates with Pandrol (TM) type rail fixings. Insulated rail joiners are required to provide electrical breaks where Electrofrog turnouts are used, for more details see our Wiring the Layout publications Nos 4 and 21. The SL-713 Transition Track is an ideal way to connect Flat Bottom track to the Bullhead Setrack and Streamline track systems.

A one piece moulding that adds scenic realism to turnouts (6 per pack)

Detailed moulding of the ramp/protective cover for the Automatic Warning System used on British railway routes. This dummy unit will add realism to your trackwork.

Makes re-railing steam locos and bogie vehicles simple - less handling too.

Also suitable for re-railing 0-16.5/0n30 locomotives and stock.

00 Card wagon body kits, designed to be used with the R20 Underframe kit. Romford wheels and bearings can be used to complete the model.

00 Card wagon body kits, designed to be used with the R20 Underframe kit. Romford wheels and bearings can be used to complete the model.

Three creels or lobster pots in a row, for boat decks or fish docks. (also available as part of QS427)
Size approx (mm) L22 x W9 x H7. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

From Kit PS20

Based on LNER 12 ton Goods Van

500 of these vans were built in the 1930s, for the substantial LNER fruit traffic, originating mainly from East Anglia, as well as Harwich, Hull and Leith. They might have also been used for general traffic outside of the growing season, and lasted into the 1960s. Transfers for LNER and BR. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings, 3 link couplings and transfers. This kit is supplied with pre-coloured moulded parts although painting can improve the appearance. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.