Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 860mm of countryside fencing.

This kit contains the parts to make 1 Upper Quadrant Home or Distant Signal. Glue and paints required to complete model.

Stations often had these Water Cranes at the end of the platforms so the locomotives could be refilled without detaching them from the train. Also included is a coke brazier, called a 'fire devil' to keep the cast iron pipe from freezing up during the winter. These cranes were usually supplied by a large water tank (see Ratio 506 and 551 and Wills SS34 kits). Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

A popular size especially in the garden, SM-32 models are built to a scale of 16mm/foot and run on a gauge of 32mm, the equivalent of a two foot gauge railway. SM-32 has become the first choice for many narrow gauge enthusiasts who want to operate live steam locomotives by radio control, the large size of the locomotives means plenty of room for the receiver and control servos. The ST-607 is designed to match the small radius turnouts SL-E691 and 692, making it easy to construct parallel sidings and passing loops, and to provide an outer (Second Radius) circuit to the ST-605. The SM-32 Setrack system is also compatible with the SM-32 Streamline track system.

Peco Setrack Bullhead 0 Gauge track makes it possible have somewhere to run trains without having to build or find room for a fixed layout. With Setrack you can lay out your trackwork indoors on the floor or out on the patio in any configuration you choose and pack it away again afterwards. Compatible with and made to the same high standard of detail and realism as the Bullhead Streamline range, it can also be incorporated into a Streamline layout without problems. Made with solid nickel silver rail to the classic bullhead section and check rail are also machined from solid rail. The SL-713 0 Gauge Bullhead to Flat Bottom Transition Track makes it easy to also incorporate the Setrack range into a layout using Flat Bottom track.

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track. This rigid track system is particularly useful on small layouts with tight curves, and is fully compatible with the 009 Streamline track system.

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track. This rigid track system is particularly useful on small layouts with tight curves, and is fully compatible with the 009 Streamline track system.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of vacuum formed clear plastic.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Stall with Bananas, Cucumbers, Melons and Peppers
Similar to SS365 and an ideal companion, but with a different selection of fruit and vegetables on display.
Size: 28mm x 14mm x 13mm high. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of vacuum formed clear plastic.

A more modern trackside detail, concrete trunking (SS87) would carry the cabling along the lineside between boxes. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Approximate size: 29mm x 14mm x 11mm.
A little stall draped with imitation grass and topped with four open wooden boxes displaying farm fresh cauliflower, carrots, potatoes and apples. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Gauge One models are built to a scale of 10mm/foot, or approx 1:30 scale. This is a great scale for live steam locomotives, or electric and internal combustion models. This scale is often used in the great outdoors, however, indoor scenic layouts are not unknown.

Gauge One models are built to a scale of 10mm/foot, or approx 1:30 scale. This is a great scale for live steam locomotives, or electric and internal combustion models. This scale is often used in the great outdoors, however, indoor scenic layouts are not unknown.

A popular size especially in the garden, SM-32 models are built to a scale of 16mm/foot and run on a gauge of 32mm, the equivalent of a two foot gauge railway. SM-32 has become the first choice for many narrow gauge enthusiasts who want to operate live steam locomotives by radio control, the large size of the locomotives means plenty of room for the receiver and control servos. The SM-32 Streamline track system is compatible with the SM-32 Setrack system.

A popular size especially in the garden, SM-32 models are built to a scale of 16mm/foot and run on a gauge of 32mm, the equivalent of a two foot gauge railway. SM-32 has become the first choice for many narrow gauge enthusiasts who want to operate live steam locomotives by radio control, the large size of the locomotives means plenty of room for the receiver and control servos. The SM-32 Streamline track system is compatible with the SM-32 Setrack system.

For large scale narrow gauge models running on 45mm gauge track, it is designed for electrically powered models but is also entirely suitable for running radio controlled live steam trains. The robust construction makes it equally at home for use both indoors and outside. These Buffer Stops are compatible with the G45 Setrack system.

For large scale narrow gauge models running on 45mm gauge track, it is designed for electrically powered models but is also entirely suitable for running radio controlled live steam trains. The robust construction makes it equally at home for use both indoors and outside. Compatible with the G45 Setrack system.

Gauge One models are built to a scale of 10mm/foot, or approx 1:30 scale. This is a great scale for live steam locomotives, or electric and internal combustion models. This scale is often used in the great outdoors, however, indoor scenic layouts are not unknown.

Peco Streamline Flat Bottom 0 Gauge track is superbly detailed, with correct scale width 'wood grain' sleepers and integrally moulded baseplates with Pandrol (TM) type rail fixings.

The SL-713 Transition Track is an ideal way to connect Flat Bottom track to the Bullhead Setrack and Streamline track systems.