Kit contains parts to make 12 Relay Boxes. Use with Concrete Trunking (Ref 258); supplied with pre-coloured parts although painting and/or weathering can add realism. Glue is required to complete this model.

This 20,000 gallon design is equally at home replenishing water troughs (Ratio Water Troughs kit Ref 255), a large motive power depot or supplying several platform mounted water cranes (Ratio Water Crane and Fire Devil Ref 212). Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 72mm x 30mm

A essential feature on steam era main lines for over 100 years; this kit contains parts to make 370mm of troughs and includes relevant signboards. Use in conjunction with the Large Water Tower (Ref 256). Glue and paints are required to complete this model.

Carries the cable between Relay boxes (Ref 257) and Control Centres. Kit makes 1150mm of trunking plus 8 trunking junctions. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Additional piers for the 251 Viaduct kit, can also be used as supports for the NB-38 and 39 Girder Bridge Sides. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Height 88mm, width 63mm each

The Wills scenic series provides a range of simple to make kits that help to change your layout into a model railway that contains real life detail. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Height 68mm.

Extension pack for the 251 Viaduct kit. 73mm Long, 63mm Wide and 130mm High. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Includes a lever, cord and screw eyes - everything you need to operate one signal.

Can be extended by adding additional kits and the 254 Piers, or with the 252 Extra Arch and Pier. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 220mm x 63mm, 130mm High.

With it's fine scale latticework and curved section roof, this typical footbridge will add interest and a sense of importance to any model station. The versatile kit design means that the stairs can be assembled to face in either direction or straight off the end of the bridge. Moulded in 3 colours to make painting optional, the tooling of the fine lattice work sets the standard for injection moulding in this scale. Additional kits can be used to create multiple spans, whilst larger, busier stations often had 2 stairways to each platform, leading off in both directions. Could also be used without the roof sections at a large terminus under an overall station canopy. Glue is required to complete this model. Span: 93mm

These towers are an impressive sight and were an essential feature on mainline railways. The Pecoscene ranges provide the perfect loading materials, Real Coal (PS-330 -332), Limestone (PS-342 and 3), Sand (PS-344), Iron Ore (PS-340), Grey Stone (PS-300- 307), and Brown Stone (PS-310 - 317) for a quarry, mine or pit loading hopper. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint: 116mm x 92mm, Height 181mm

Classic style fencing modelled on a GWR design, but still seen also in many other places, around parks, public buildings, monuments etc. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains:
• 2 x 56mm lengths of ramp fencing
• 8 assorted gates

Classic style fencing modelled on a GWR design, but still seen also in many other places, around parks, public buildings, monuments etc. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains:
• 484mm of fencing

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains Approximately 476mm of fencing.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains:
• 238mm of Straight Fencing
• 2 x 56mm lengths of Ramp Fencing
• 4 Gates

The 2 Trestles as supplied in kit 241 are available separately, ideal for use with Peco NB-38 and 39 Girder Bridge sides or for those who enjoy scratchbuilding and kit bashing. Footprint: 61mm x 12mm, 125mm Height

This kit is designed to extend the Steel Truss Bridge with Stone Piers (Ref 240). Supplied with decking and truss girder sides together with a single trestle. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Size: Span 144mm. Trestle: 61mm x 12mm, 125mm Height

This kit gives you the opportunity to make an interesting bridge for your layout. The design is fairly universal across the world, often found spanning tracks in urban areas or bridging rivers in the country. This style of truss girder bridge is also very common in mountainous regions. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Size: Span 144mm. Trestle: 61mm x 12mm, 125mm Height

Often seen supporting railway cuttings and embankments in urban areas where there is insufficient space for earth slopes. Make cuttings, yard walls or raised railway viaducts with these versatile sections. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Length 348mm, Height 35mm

The Southern Railway produced pre-cast concrete huts after WW2 to replace wooden huts in many locations; these were used by platelayers to store tools and for shelter. Glue and paints required to complete model. Kit includes parts for 2 huts: Larger Hut 23mm x 17mm, Smaller Hut 13mm Square

2 huts for shelter and tool storage or with many other uses; platelayers huts, tool stores, lamp huts etc. - even garden/allotment sheds or temporary site huts. Glue and paints required to complete model. Footprint: Brick Hut 28mm x 15mm, Wooden Hut 28mm x 16mm

This kit is modelled on the Midland Railway standard 4d box with characteristic hipped roof, and is based on the prototype at Swadlincote Junction, Leics. This timeless design lasted right up to the demise of mechanical signalling. Use the Ratio Signal Box Interior kit No. 224 for a 20 lever frame, level crossing wheel and other detail. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 42mm x 27mm (excluding steps).

This modern style of crossing features 2 half barriers on each side of the track, protected by (dummy) warning lights. Can be used for double or single track; glue and paints required to complete model.

Level Crossings were commonplace, particularly in towns and across such areas as the Fenland of Eastern England. Today most have been replaced by modern barriers. Can be used for double or single track; glue and paints required to complete model.