SORT BY
PAGE

113 Products Found

ARP Signal Box

These specially reinforced ARP (Air Raid Precautions) signal boxes featured substantial construction, primarily to protect the locking room gear from bomb blasts during air raids in World War II. A number of similar signal box designs were still to be found around the rail network until quite recently, due to them being difficult to demolish!
The 554 includes all moulded parts required which are produced to a high standard and in base colours. Kit requires painting and light weathering to create the signal box pictured above.

 

Carriage Cleaning Platform

Where carriages, multiple unit sets or modern locos are stored for cleaning and maintenance, narrow platforms are provided for access. Still widely used today alongside carriage sidings, and also within storage and maintenance facilities (See Ratio 527 Carriage Shed and Wills Modern SSM300 Modern Industrial Building and SSM315 Extension kits). Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint: 500mm long plus access steps

Carriage Shed

These were a common feature in sidings where repairs, cleaning and maintenance were effected. This shed will cover 2 tracks and can easily be extended; the kit includes guttering and centre walkway. A versatile kit with many uses both on and off the railway. Glue and paints required to complete model. Footprint 320mm x 105mm.

Cattle Dock

A common feature of country stations large and small, whilst market town cattle docks could be very large indeed. Our model is of the one at Yeovil Pen Mill (GWR) Station, Somerset. Livestock (Modelscene Cows Ref. 5100, Sheep and Lambs Ref. 5110, Pigs Ref. 5108, and Horses Ref.5105) was conveyed on British railways until around 1973, although many cattle docks remained in place unused, becoming overgrown - an interesting scenic feature. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 170mm x 110mm

Coach Seats

Supplied with pre-coloured parts although painting can add realism; glue is required to complete this model. This pack contains enough seating for an 8 compartment coach - 520mm.

Coal Depot

In the days when everything came by rail, even the smallest goods yard would provide a facility for the local coal merchant next to a siding. The Ratio 526 Coal Sacks kit and Peco Scene Real Coal Refs PS-330,1 and 2 can provide extra detailing, as can the Modelscene Coalman and Scales Ref. 5029. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 140mm x 30mm

Coal Sacks

Kit includes 48 coal sacks. Initially coal was transported in 12 ton wagons to railway yards. Coal merchants then transferred it to heavy duty 1 cwt sacks for supply to customers. The kit also includes weights and scales; supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model.

Coal Staithes

Suitable for extending the Coal Depot (Ref 532) or as a stand alone item. The Ratio 526 Coal Sacks kit and Peco Scene Real Coal Refs PS-330,1 and 2 can provide extra detailing. Glue and paints required to complete model. Footprint: 75mm x 32mm

Coal/Timber Merchants

Many merchants had private sidings where they could be supplied directly by rail. This kit includes office, loading platform, coal scales, hoist and 2 lamps and can be constructed in a number of ways. The Ratio 514 Pallets, Sacks and Barrels, 526 Coal Sacks kits and Modelscene 5029 Coalmen and Scales can provide extra detailing. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 160mm x 105mm

Coaling Stage

An essential part of every small steam loco depot, add some Peco Scene Real Coal Refs PS-330/1/2 for full effect. Supplied with pre-coloured parts although painting and/or weathering (Peco Scene PS-362 Coal Dust) can add realism; glue is required to complete this model. Footprint 60mm x 55mm

Coaling Tower

These towers are an impressive sight and were an essential feature on mainline railways. The Pecoscene ranges provide the perfect loading material, Real Coal (PS-330 -332), Limestone (PS-342 and 3), Sand (PS-344), Iron Ore (PS-340), Grey Stone (PS-300- 307), and Brown Stone (PS-310 - 317) for a quarry, mine or pit loading hopper. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint: 64mm x 50mm, Height 95mm

Concrete Fencing

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 485mm of fencing; the SR's modular design makes it easy to form ramp sections or follow other changes in ground contour.

Concrete Fencing Posts, Gates, Signs etc.

Supplied with pre-coloured parts although painting and/or weathering can add realism. The wire to represent the railings is not included; glue is also required to complete this model. This pack contains:
• 50 Fence Posts
• 10 Gates
• 10 Signs
• 5 Stand Pipes
• 15 Cow Pats!

Concrete Footbridge

A Southern Railway design that will span 2 tracks and includes lamps and smoke deflectors. Glue and paints required to complete model. Span 150mm.

Concrete Lamps

Southern Railway non working concrete lamp posts, can make 4 double standards or single standards and wall brackets. Glue and paints required to complete model. Height 64mm

Concrete Lineside Huts (2)

The Southern Railway produced pre-cast concrete huts after WW2 to replace wooden huts in many locations; these were used by platelayers to store tools and for shelter. Glue and paints required to complete model. Kit includes parts for 2 huts: Footprint: 50mm x 38mm each

Corridor Connections

Pack contains 1 pair, essential detail for all model corridor train stock.

Diamond Frame Bogies

Pack includes parts to make a pair of these Bar Frame type bogies as included in the GW Bolster A kit (Ref 562) and the LMS Bogie Iron Ore Wagon (Ref 571). Kit includes bolster, wheels and tension lock couplings; supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Engine Shed and Hut

Provide a home for your locos, giving them cover from the elements and a place for repairs and maintenance. It is normal to find a water tower and coaling stage nearby (see Ratio 540, 505, 506, 551 and Wills SS34 kits), and an Inspection Pit (Peco LK-56/156) was also often provided. Can be used as either a single or through shed. Multiple kits can be joined together if required. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 176mm x 90mm

Fogmans Hut

This kit replicates the precast concrete Southern Region example, often paired with the Concrete Hut (ref 518). A Fogman, when fog or snow reduced visibility, placed detonators on the rails ahead of signals or temporary speed restrictions imposed due to works etc. to provide additional warning to train drivers. The kit also includes a set of platelayers tools. Glue and paint are required to complete this kit. Footprint 20mm x 15mm.

Ground Signals

Makes 4 Ground Signals, glue and paints required to complete model.

Grounded Coach Body

The use of old coach bodies as stores, mess huts or even homes was common. Clutter included, huge scope for adding detail to such a scene. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 115mm x 40mm

Grounded Van Body

Usually used for storage around the station or goods yard, they often can be found being used as sheds or on farmland. Clutter included; supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 176mm x 90mm

Gutters/Downpipes

Pack includes: 432mm of guttering, 465mm of soffits, 4 x 71mm down pipes, 1 angled water pipe and 14 down pipe brackets.

GWR Brick Signal Box

This kit is a model of a typical GWR brick built signal box with a hipped roof, built between 1896 and 1921. In practice there were many small differences between individual signal boxes as they were often tailored to fit the location, a good example is on the South Devon Railway at Buckfastleigh. The Ratio Signal Box Interior kit 553 will provide a wealth of interior detail. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint: Approx 90mm x 48mm

GWR Distant Signal

Part of the Ratio 'Quick Assembly' family of signals. These allow you to make home and distant signals quickly and easily. They include signal operating wire and lever. This kit enables you to replicate a GWR Distant Signal. Kit includes pre-coloured signal arm, glue and paints required to complete model.

GWR Home and Distant Signal

Part of the Ratio 'Quick Assembly' family of signals. These allow you to make home and distant signals quickly and easily. They include signal operating wire and lever. This kit enables you to replicate a GWR Home and Distant Signal. Kit includes pre-coloured signal arms, glue and paints required to complete model.

GWR Home Signal

Part of the Ratio 'Quick Assembly' family of signals. These allow you to make home and distant signals quickly and easily. They include signal operating wire and lever. This kit enables you to replicate a GWR Home Signal. Kit includes pre-coloured signal arm, glue and paints required to complete model.

GWR Junction/Bracket Signal

Part of the Ratio 'Quick Assembly' family of signals. These allow you to make home and distant signals quickly and easily. They include signal operating wire and lever. This kit enables you to replicate a GWR Junction/Bracket signal, either as a Home, Distant or combined Home and Distant signal. Glue and paints required to complete model.

GWR Lineside Fencing

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 36 posts and enough wire to make 720mm of fencing.

GWR Plate Wagon Bogies

Pack includes parts to make a pair of these heavy duty design bogies that feature cast steel type sideframes. Kit includes bolster, wheels and tension lock couplings; supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

GWR Round Post Signal

Advanced Construction Signals. Aimed at modellers with more experience, these kits enable you to custom make specific configurations of signals to suit your track layout and train paths. This kit contains 2 posts, 2 Home arms and 1 Distant. It can also be used with the Pratt Truss Gantry kit (Ref 478) to provide over track signals. Glue and paints required to complete model.

GWR Round Post Signal

Advanced Construction Signals. Aimed at modellers with more experience, these kits enable you to custom make specific configurations of signals to suit your track layout and train paths. This kit enables you to replicate a GWR Junction/Bracket Home signal. Glue and paints required to complete model.

GWR Signal Box

Although modelled on the signal box at Highley, Severn Valley Railway, this box was designed by the private signalling firm Mackenzie and Holland, making it suitable for many areas of the country. The Ratio Signal Box Interior kit 553 will provide a wealth of interior detail. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 92mm x 51mm inc. steps.

GWR Square Post Signal

Advanced Construction Signals. Aimed at modellers with more experience, these kits enable you to custom make specific configurations of signals to suit your track layout and train paths. This kit will make either 4 separate signals, or combinations of bracket signals plus 4 Ground Signals. It can also be used with the Pratt Truss Gantry kit (Ref 478) to provide over track signals. Glue and paints required to complete model.

GWR Station Fencing, Black

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 680mm of fencing.

GWR Station Fencing, White

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains:
• 340mm of Straight Fencing
• 2 x 102mm lengths of Ramp Fencing
• 1 Large and 1 Small Gate
• 2 Ramp Gates
• 1 Ticket Gate

GWR Station Fencing, White

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 680mm of fencing.

GWR/LMS Joint Loading Gauge

After loading, open wagons were checked for height using this simple gauge to ensure that loads did not hit bridges etc. and therefore were usually placed near the yard exit. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Hand Rail Stanchions, Double Rail

Keep on the right side of health and safety regulations - use these double rail stanchions in locations wherever the general public are allowed. Pack contains 20 injection moulded supports and approx 2 x 400mm length of nickel silver railing.

Handrail Stanchions, Single Rail

Always difficult to scratchbuild, these realistic features will enhance any industrial installation that needs a single rail safety barrier. Pack contains 20 injection moulded supports and 400mm length of brass wire.

Hoist

Used for light lifting work in goods depots and other yards. Also to be found inside goods sheds for unloading wagons. Chain included; kit requires glue and paints to complete.

Industrial Fittings

Kit and scratch builders accessory, 100mm high chimney with cowl, hand wheels and chimney support wires.

Industrial Window Arches

Scratch and Kit builders accessory pack. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit includes:
• 8 Semi - Circular brick arches - Internal Diameter 30mm, External Diameter 37mm
• 8 Semi - Circular brick arches - Internal Diameter 7mm, External Diameter 11mm
• 2 Circular brick window surrounds - Internal Diameter 8mm, External Diameter 13mm
• 2 Window/Door Arches - Length 48mm

Industrial Windows

8 Round arch-topped 19th Century style window frame mouldings 20mm High x 11mm Wide.

Lamp and Ventilator Tops

Detail pack for coach roofs (roof not included). Pack contains 20 ventilators, 12 lamp tops.

Large Grounded Mess Van/Store

If you have a large goods yard on your layout, this would make a good mess coach for the staff. It could also be used as a dwelling or provide sleeping accomodation on a campsite. Includes clutter; glue and paints required to complete model. Footprint: 195mm x 45mm

Large Water Tower

This 20,000 gallon design is equally at home replenishing water troughs, a large motive power depot or supplying several platform mounted water cranes (See Ratio Water Crane and Fire Devil kit 413 and Peco LK-2 Water Cranes). Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 122mm x 49mm

PAGE

Trade Login

WOULD YOU LIKE TO BECOME A TRADE PARTNER?

PECO - PLEASE SUPPLY TEXT.
An introductory paragraph with criteria listed as bullets points, closing with contact call to action.