SORT BY
PAGE

837 Products Found

10.5mm Bogie Spoked Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

10.5mm Disc Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

10.5mm Disc Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

10.5mm Spoked Tender Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

12mm 3 Hole Disc Wheel

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

12mm Bogie Disc Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

12mm Bogie Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

12mm Disc Brake Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

12mm Disc Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

12mm Spoked Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

14mm Bogie Disc Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

14mm Bogie Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

14mm Disc Brake Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

14mm Disc Coach Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

14mm Mansell Coach Disc Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

14mm Tender Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

16mm Bogie Disc inside Bearing

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

16mm Bogie Spoked Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

16mm Disc Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

16mm Tender Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

3 Link Brass Couplings

Barrel Plated. Three-link chain couplings, with no means of drawing the wagons together, were used to form the peculiarly British "loose coupled" freight train: since such trains were not fitted with an automatic through-train braking system there were no pipes to connect between the vehicles. Control of the train was assisted by the guard's van at the rear of the train, or in certain cases a series of vans spaced along the train, which kept the couplings taut and therefore also helped prevent snapped couplings. Such trains travelled at low speeds and were finally phased out in the 1970s.

3/32in Phosphor Bronze Strip

A useful item for making items such as your own electrical pick ups for locomotives and illuminated rolling stock.

3/64in Phosphor Bronze Strip

A useful item for making items such as your own electrical pick ups for locomotives and illuminated rolling stock.

60:1 Ratio 1/8" Bore (Gear) 3/32" Bore (Worm) Gear and Worm Set

Brass gear wheels and steel worms, drilled and tapped with 10BA fixing screws.

6ft Way Gauge

A small but useful item to ensure the accurate spacing of double tracks in 00/H0 along both straight and curved sections. Also gauges platform height to the recommended 14mm (3ft 6ins in 4mm scale).

7mm Disc Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

9 ft Wheelbase LN WR/LMS Wagon Underframe Kit

Contains 2 underframe kits for unfitted pre group wagon underframe with wooden type solebars. Kit and scratch builders' accessory; glue and paints are required to complete this model.

9ft/10ft Underframe Kit

These Underframe kits give a choice of a 9ft wooden or 10ft steel type Sole Bars and include:
• Actual working axlebox springs
• Sprung metal buffers
• Choice of 9 foot (wooden) or 10 foot (steel) solebars
• Pin-point axles and bearings for maximum length trains
• Both Peco Simplex and Peco Anita tension lock couplings.Romford wheels and bearings can be used to complete the model.

9mm Bogie Spoked Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

9mm Disc Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

9mm Disc Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

AA Telephone Box

These Automobile Association boxes were an integral part of the British rural scene from a bygone age, providing roadside assistance to its many members, long before the age of mobile phones.
Size (mm) 17 x 17 x 39. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Abutments with Wing Walls

A pair of abutments with 4 wing walls. Designed for use with the SS57 Vari Girder kit, LK-10 and 11 Girder Bridge sides and the SS26 Victorian style bridge but suitable for any bridge project. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 202mm x 96mm

Allotment

Vegetable Plot with marrows, runner beans grown on 'wigwams' and 3 cloches.
Size approx (mm) L75 x W40 x H25. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Allotment Section with Shed, Cold Frames and Sundries

Size approx (mm) L94 x W42. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Allotment with Hut, Potatoes and Rhubarb

Size approx (mm) L90 x W42. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Aluminium Beer Kegs

For breweries and public house deliveries.
Size approx (mm) L50 x W25 x H16. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Anderson and Co Coal 7 Plank

00 Card wagon body kits, designed to be used with the R20 Underframe kit. Romford wheels and bearings can be used to complete the model.

Anderson Shelter, Brick Ends

Formerly 2nd world war air-raid shelters erected in back gardens in many built up areas, these made ideal storage sheds in peacetime.
Size approx (mm) L35 x W30 x H28. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Anderson Shelter, Wooden Ends

Mass produced corrugated iron shelter with wooden planked ends.
Size approx (mm) L35 x W30 x H28. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Army Personnel

Pack contains 5 fully painted Army Personnel figures.

Asbestos Sheets

Pack contains 6 Asbestos Sheets

Assorted Merchandise

An interesting assortment of crates, sacks, barrels etc ready palleted.
Size (mm) 61 x 29 x 20. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Bachmann(TM) Coal Wagon Load

Sized for original Bachmann (TM) coal wagons, but they can be pared with a knife to fit into smaller open wagons.
Size (mm) 67 x 29. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Bachmann(TM) Coal Wagon Load

Fits the latest Bachmann (TM) Blue Riband 16T mineral wagons.
Size (mm) 64 x 30. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Baddesley Coal 7 Plank

00 Card wagon body kits, designed to be used with the R20 Underframe kit. Romford wheels and bearings can be used to complete the model.

Ballast Bins

Pack contains 3 Ballast Bins; seen spread along the railway to enable the permanent way crew (See Modelscene 5077 Track Maintenance Party) to add additional ballast where neccesary.

Barn

A traditional barn building, for storing crops or farm machinery; the Farmyard Junk Set SSAM100 will help set the scene. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 103mm x 68mm.

PAGE

Trade Login

WOULD YOU LIKE TO BECOME A TRADE PARTNER?

PECO - PLEASE SUPPLY TEXT.
An introductory paragraph with criteria listed as bullets points, closing with contact call to action.