SORT BY
PAGE

400 Products Found

TT:120 Additional Wooden Sleeper

Use SL-310 metal joiners and SL-1208 joining sleepers. Use SL-311 insulating joiners to create isolated track sections (if using DCC control these are not required).

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb flat bottom rail. The flexible sleeper base is detailed with fine wood grain and spikes through British Railways’ BR1 baseplates under the rails, a combination that continues to be widely used on Britain’s railways.

Code 55

TT:120 Buffer Stop, Rail type

Plastic kit, 4 buffer stops per pack.

A craft knife, needle files and liquid poly cement are required for construction.

For use with PECO TT:120 code 55 flexible track and turnouts.

The ends of sidings and bay platforms are usually terminated with a buffer stop to prevent rolling stock leaving the end of the track. When sidings are re-laid with flat-bottom rails, as represented by the PECO TT:120 range of code 55 flexible track and turnouts, often the original buffer stops made of bullhead rail would be re-used, along with the short length of track to which they are attached. examples of this can still be seen in various locations on Britain’s railway network.

Each kit includes 4 buffer stops, including 30mm lengths of dummy Bullhead track they are attached to. Each unit locates on the end of the track and needs to be glued to the baseboard.

TT:120 C55 Turnout, Medium Radius, Left Hand, Unifrog

Code 55

Unifrog

Use SL-310 metal rail joiners and SL-1208 joining sleepers.

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb rail, which continues to be widely used on Britain’s railways. The turnouts conform to NEM standards and the medium radius geometry is a close match to British Railways’ B6 standard.

Technical Specifications

Length - 180mm

Exit angle - 11.25°

Radius - Nominal 922.6mm/36.3"

TT:120 C55 Turnout, Medium Radius, Right Hand, Unifrog

Code 55

Unifrog

Use SL-310 metal rail joiners and SL-1208 joining sleepers.

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb rail, which continues to be widely used on Britain’s railways. The turnouts conform to NEM standards and the medium radius geometry is a close match to British Railways’ B6 standard.

Technical Specifications

Length - 180mm

Exit angle - 11.25°

Radius - Nominal 922.6mm/36.3"

TT:120 C55 Flexible Track, Wooden Sleeper

Code 55

Use SL-310 metal joiners and SL-1208 joining sleepers. Use SL-311 insulating joiners to create isolated track sections (if using DCC control these are not required).

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb flat bottom rail. The flexible sleeper base is detailed with fine wood grain and spikes through British Railways’ BR1 baseplates under the rails, a combination that continues to be widely used on Britain’s railways.

Flexible Track, Concrete Sleeper

Concrete sleeper track has been in use on the railways of Britain since around 1940, usually combined with wooden sleeper turnouts and crossings, and this track is a faithful representation of this design.

If you wish to mix wheel standards on your 00/H0 layout, this is the trackage to choose. Code 100 rail allows flange depths up to 1.6mm which means that both vintage and current stock will run happily together. The wide range of turnouts and crossings in this series includes every type, and the geometry of this range has been cleverly designed to make it easy to build convenient, complex and aesthetically pleasing formations.

PECO Streamline OO/HO Transition Track Code 83/Code 70

PECO Streamline transition track for connecting Code 83 and Code 70 track.

Whilst our HO Code 83 track is perfect for modelling American mainlines, this new Code 70 track is just right for secondary lines, lightly-used branches, sidings, etc. Indeed, it will be perfect for modelling the early-to-mid 20th century railroading era when lighter rail was more commonly used. Featuring accurate rail spike detail, correctly proportioned ties (sleepers) and nickel silver rail, this new flexible track has been produced to the same high standard that modellers have come to expect from PECO and confirms to the specifications laid down by the NMRA.

Code 70, No.6 Turnout Left Hand, Uniofrog

Whilst our HO Code 83 track is perfect for modelling American mainlines, this new Code 70 track is just right for secondary lines, lightly-used branches, sidings, etc. Indeed, it will be perfect for modelling the early-to-mid 20th century railroading era when lighter rail was more commonly used. Featuring accurate rail spike detail, correctly proportioned ties (sleepers) and nickel silver rail, this new flexible track has been produced to the same high standard that modellers have come to expect from PECO and confirms to the specifications laid down by the NMRA..

Code 70, No.6 Turnout Right Hand, Uniofrog

Whilst our HO Code 83 track is perfect for modelling American mainlines, this new Code 70 track is just right for secondary lines, lightly-used branches, sidings, etc. Indeed, it will be perfect for modelling the early-to-mid 20th century railroading era when lighter rail was more commonly used. Featuring accurate rail spike detail, correctly proportioned ties (sleepers) and nickel silver rail, this new flexible track has been produced to the same high standard that modellers have come to expect from PECO and confirms to the specifications laid down by the NMRA..

Unifrog Turnout, 6th Radius, Left Hand

83 Line items are realistic models of North American railroad track, with Code 83 nickel silver rail. Scaled from A.R.E.A. drawings and NMRA compliant, Code 83 features authentic tie sizes and spacing, the standard American number system for frog geometry, plus a very fine representation of traditional rail spike fixings. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.

Unifrog Turnout, 6th Radius, Right Hand

83 Line items are realistic models of North American railroad track, with Code 83 nickel silver rail. Scaled from A.R.E.A. drawings and NMRA compliant, Code 83 features authentic tie sizes and spacing, the standard American number system for frog geometry, plus a very fine representation of traditional rail spike fixings. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.

70 Line Flexible Track, Wooden Sleeper

Whilst our HO Code 83 track is perfect for modelling American mainlines, this new Code 70 track is just right for secondary lines, lightly-used branches, sidings, etc. Indeed, it will be perfect for modelling the early-to-mid 20th century railroading era when lighter rail was more commonly used. Featuring accurate rail spike detail, correctly proportioned ties (sleepers) and nickel silver rail, this new flexible track has been produced to the same high standard that modellers have come to expect from PECO and confirms to the specifications laid down by the NMRA..

Bullhead Buffer Stop, Rail-built

Most buffer stops of the period prior to the 1970s were constructed from spare bullhead rail and these new mouldings contain plenty of detail such as bolt heads and the bullhead profile of the rail. The design has also accounted for the option of an alternative buffer for EM gauge.

There are enough parts in the kit for two buffer stops. Designed to clip onto the bullhead rail profile, this easy-to-assemble kit will be simplicity itself to install.

Starter Track Set

This pack contains:

  • 6 x ST-401 Standard Straights
  • 2 x ST-411 Double Straights
  • 1 x ST-413 Double Straight (Wired)
  • 5 x ST-403 1st Radius Standard Curves
  • 6 x ST-412 1st radius Double Curves
  • 1 x ST-405 Right Hand Turnout
  • 1 x ST-406 Left Hand Turnout
  • 2 x SL-440 Buffer Stops
  • 1 x OO-9 Planbook

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track. This rigid track system is particularly useful on small layouts with tight curves, and is fully compatible with the 009 Streamline track system.

Double Curve, 4th Radius (Pack of 4)

This pack will make a semi-circle of track.

PECO Setrack N Gauge Code 80 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of N gauge model trains.
Being fully compatible with both Code 80 and Code 55 PECO Streamline, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Double Curve, 3rd Radius (Pack of 4)

This pack will make a semi-circle of track.

PECO Setrack N Gauge Code 80 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of N gauge model trains.
Being fully compatible with both Code 80 and Code 55 PECO Streamline, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Double Curve, 2nd Radius (Pack of 4)

This pack will make a semi-circle of track.

PECO Setrack N Gauge Code 80 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of N gauge model trains.
Being fully compatible with both Code 80 and Code 55 PECO Streamline, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Double Curve, 1st Radius (Pack of 4)

This pack will make a semi-circle of track.

PECO Setrack N Gauge Code 80 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of N gauge model trains.
Being fully compatible with both Code 80 and Code 55 PECO Streamline, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Double Straight (Pack of 8)

PECO Setrack N Gauge Code 80 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of N gauge model trains.
Being fully compatible with both Code 80 and Code 55 PECO Streamline, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Standard Curve, 4th Radius (Pack of 8)

This pack will make a semi-circle of track.

PECO Setrack N Gauge Code 80 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of N gauge model trains.
Being fully compatible with both Code 80 and Code 55 PECO Streamline, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Standard Curve, 3rd Radius (Pack of 8)

This pack will make a semi-circle of track.

PECO Setrack N Gauge Code 80 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of N gauge model trains.
Being fully compatible with both Code 80 and Code 55 PECO Streamline, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Standard Curve, 2nd Radius (Pack of 8)

This pack will make a semi-circle of track.

PECO Setrack N Gauge Code 80 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of N gauge model trains.
Being fully compatible with both Code 80 and Code 55 PECO Streamline, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Half Curve, 1st Radius (Pack of 4)

PECO Setrack N Gauge Code 80 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of N gauge model trains.
Being fully compatible with both Code 80 and Code 55 PECO Streamline, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Standard Curve, 1st Radius (Pack of 8)

This pack will make a semi-circle of track.

PECO Setrack N Gauge Code 80 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of N gauge model trains.
Being fully compatible with both Code 80 and Code 55 PECO Streamline, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Short Straight (Pack of 4)

PECO Setrack N Gauge Code 80 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of N gauge model trains.
Being fully compatible with both Code 80 and Code 55 PECO Streamline, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Standard Straight (Pack of 8)

PECO Setrack N Gauge Code 80 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of N gauge model trains.
Being fully compatible with both Code 80 and Code 55 PECO Streamline, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Starter Track Set 2nd Radius

This pack includes:

  • 4 x ST-1 Standard Straights
  • 4 x ST-11 Double Straights
  • 8 x ST-15 2nd Radius Double Curves
  • 1 x ST-10 Standard Straight (Wired)
  • 2 x ST-5 Right Hand Turnouts
  • 2 x ST-8 Buffer Stops
  • 1 x IN-1 N Setrack Planbook

This set can be used in conjunction with the ST-300 1st Radius Starter Track set to create a double track layout.

PECO Setrack N Gauge Code 80 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of N gauge model trains.
Being fully compatible with both Code 80 and Code 55 PECO Streamline, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Turnout (Mainline Sleepers), Medium Radius, Left Hand

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range emulates many narrow gauge lines found around Europe which are built to main line standards. It is compatible with the Peco 009 Setrack rigid track system. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.

Turnout (Mainline Sleepers), Medium Radius, Right Hand

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range emulates many narrow gauge lines found around Europe which are built to main line standards. It is compatible with the Peco 009 Setrack rigid track system. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.

Curved Turnout, Right Hand

PECO Setrack N Gauge Code 80 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of N gauge model trains.
Being fully compatible with both Code 80 and Code 55 PECO Streamline, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Flexible Track, Wooden Sleeper

83 Line items are realistic models of North American railroad track, with Code 83 nickel silver rail. Scaled from A.R.E.A. drawings and NMRA compliant, Code 83 features authentic tie sizes and spacing, the standard American number system for frog geometry, plus a very fine representation of traditional rail spike fixings.

Bullhead Y Turnout, Medium Radius

Peco Streamline Bullhead 0 Gauge track has set unsurpassed standards for 7mm scale realism. Superbly detailed, its 'wood grain' sleepers are the correct scale width and have integrally moulded scale chairs with square headed fixing bolts and wooden keys.

This range is compatible with the 0 Setrack range; and if, as on the real network, you wish to use a combination of Bullhead and Flat Bottom track the SL-713 Transition Track provides an ideal way to connect the two types.

Bullhead Crossing, Long

This unit can be used with small, medium, or large radius turnouts to form a double junction.

Peco Streamline Bullhead 0 Gauge track has set unsurpassed standards for 7mm scale realism. Superbly detailed, its 'wood grain' sleepers are the correct scale width and have integrally moulded scale chairs with square headed fixing bolts and wooden keys.

This range is compatible with the 0 Setrack range; and if, as on the real network, you wish to use a combination of Bullhead and Flat Bottom track the SL-713 Transition Track provides an ideal way to connect the two types.

Bullhead Turnout, Medium Radius, Left Hand

Peco Streamline Bullhead 0 Gauge track has set unsurpassed standards for 7mm scale realism. Superbly detailed, its 'wood grain' sleepers are the correct scale width and have integrally moulded scale chairs with square headed fixing bolts and wooden keys.

This range is compatible with the 0 Setrack range; and if, as on the real network, you wish to use a combination of Bullhead and Flat Bottom track the SL-713 Transition Track provides an ideal way to connect the two types.

Bullhead Turnout, Medium Radius, Right Hand

Peco Streamline Bullhead 0 Gauge track has set unsurpassed standards for 7mm scale realism. Superbly detailed, its 'wood grain' sleepers are the correct scale width and have integrally moulded scale chairs with square headed fixing bolts and wooden keys.

This range is compatible with the 0 Setrack range; and if, as on the real network, you wish to use a combination of Bullhead and Flat Bottom track the SL-713 Transition Track provides an ideal way to connect the two types.

Bullhead Crossing, Double Slip

Double slips can save valuable space at station approaches, junctions etc.

Peco Streamline Bullhead 0 Gauge track has set unsurpassed standards for 7mm scale realism. Superbly detailed, its 'wood grain' sleepers are the correct scale width and have integrally moulded scale chairs with square headed fixing bolts and wooden keys.

This range is compatible with the 0 Setrack range; and if, as on the real network, you wish to use a combination of Bullhead and Flat Bottom track the SL-713 Transition Track provides an ideal way to connect the two types.

Bullhead curved Turnout, Large Radius, Left Hand

Peco Streamline Bullhead 0 Gauge track has set unsurpassed standards for 7mm scale realism. Superbly detailed, its 'wood grain' sleepers are the correct scale width and have integrally moulded scale chairs with square headed fixing bolts and wooden keys.

This range is compatible with the 0 Setrack range; and if, as on the real network, you wish to use a combination of Bullhead and Flat Bottom track the SL-713 Transition Track provides an ideal way to connect the two types.

Bullhead Curved Turnout, Large Radius, Right Hand

Peco Streamline Bullhead 0 Gauge track has set unsurpassed standards for 7mm scale realism. Superbly detailed, its 'wood grain' sleepers are the correct scale width and have integrally moulded scale chairs with square headed fixing bolts and wooden keys.

This range is compatible with the 0 Setrack range; and if, as on the real network, you wish to use a combination of Bullhead and Flat Bottom track the SL-713 Transition Track provides an ideal way to connect the two types.

Bullhead Catch Turnout, Left Hand

The purpose of a Catch Turnout is to derail a vehicle before it rolls out of a siding or branch line on to a main line.

Peco Streamline Bullhead 0 Gauge track has set unsurpassed standards for 7mm scale realism. Superbly detailed, its 'wood grain' sleepers are the correct scale width and have integrally moulded scale chairs with square headed fixing bolts and wooden keys.

This range is compatible with the 0 Setrack range; and if, as on the real network, you wish to use a combination of Bullhead and Flat Bottom track the SL-713 Transition Track provides an ideal way to connect the two types.

Bullhead Catch Turnout, Right Hand

The purpose of a Catch Turnout is to derail a vehicle before it rolls out of a siding or branch line on to a main line.

Peco Streamline Bullhead 0 Gauge track has set unsurpassed standards for 7mm scale realism. Superbly detailed, its 'wood grain' sleepers are the correct scale width and have integrally moulded scale chairs with square headed fixing bolts and wooden keys.

This range is compatible with the 0 Setrack range; and if, as on the real network, you wish to use a combination of Bullhead and Flat Bottom track the SL-713 Transition Track provides an ideal way to connect the two types.

Flexible Bullhead Track, Wooden Sleeper

Peco Streamline Bullhead 0 Gauge track has set unsurpassed standards for 7mm scale realism. Superbly detailed, its 'wood grain' sleepers are the correct scale width and have integrally moulded scale chairs with square headed fixing bolts and wooden keys. This range is compatible with the 0 Setrack range; and if, as on the real network, you wish to use a combination of Bullhead and Flat Bottom track the SL-713 Transition Track provides an ideal way to connect the two types.

Joiner Sleepers

Concrete Type Joiner sleepers - For use under the rail joints on Code 55 track

Joiner Sleepers

Wooden Type Joiner sleepers - For use under the rail joints on Code 55 track

Standard Curve, 1st Radius

PECO Setrack N Gauge Code 80 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of N gauge model trains.
Being fully compatible with both Code 80 and Code 55 PECO Streamline, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Y Turnout, Medium Radius

PECO Streamline N Gauge Code 80 - Universal trackage system
This ever-popular trackage system for N offers a choice of either wooden or concrete type sleeper flexible track and a wide range of turnouts and crossings in both Insulfrog and Electrofrog types.
Suitable for all makes of N Gauge trains and fully compatible with PECO Setrack. Two of these Y turnouts and an SL-394 Long Crossing will form a double junction.

Crossing, Single Slip

Single slips were often used on double track lines to incorporate a trailing crossover into the access for a siding, goods yard etc. The clever geometry of this range enables the modeller to easily create convenient, complex and aesthetically satisfying track formations using combinations of small, medium and large radius turnouts and crossings.
Despite a low visible rail height of just 1.4mm, all brands of N Gauge model locomotives will run on this track.
The ingenious rail section of PECO 55 combines strength and durability with a highly realistic appearance and uses the same universal rail joiners as Code 80; the geometry of this range has been cleverly designed to make it easy to build convenient, complex and aesthetically pleasing formations. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.

Flexible Track with Concrete Sleeper

This track models the most common form of concrete sleepering in use in Britain today, with flat bottom rail. PECO Streamline N Gauge Code 55 - Universal Fine trackage system
Despite a low visible rail height of just 1.4mm, all brands of N Gauge model locomotives will run on this track.
The ingenious rail section of PECO 55 combines strength and durability with a highly realistic appearance and uses the same universal rail joiners as Code 80. This track models the most common form of concrete sleepering in use in Britain today, with flat bottom rail. The geometry of this range has been cleverly designed to make it easy to build convenient, complex and aesthetically pleasing formations. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.

Flexible Track with Concrete Sleeper

Concrete sleeper track has been in use on the railways of Britain since around 1940, usually combined with wooden sleeper turnouts and crossings, and this track is a faithful representation of this design. PECO Streamline N Gauge Code 80 - Universal trackage system
This ever-popular trackage system for N offers a choice of either wooden or concrete type sleeper flexible track and a wide range of turnouts and crossings in both Insulfrog and Electrofrog types.
Suitable for all makes of N Gauge trains and fully compatible with PECO Setrack.

PAGE

Trade Login

WOULD YOU LIKE TO BECOME A TRADE PARTNER?

PECO - PLEASE SUPPLY TEXT.
An introductory paragraph with criteria listed as bullets points, closing with contact call to action.