SORT BY
PAGE

705 Products Found

Sprung LMS Brake Van Buffers

Kit and Scratch builder's accessory. Pack contains sufficient parts for 4 Buffers

Sprung SR Brake Van Buffers

Kit and Scratch builder's accessory. Pack contains sufficient parts for 4 Buffers

Sprung Wagon Buffers

Kit and Scratch builder's accessory. Pack contains sufficient parts for 4 Buffers

Sprung Wagon Buffers NB Style

Kit and Scratch builder's accessory. Pack contains sufficient parts for 4 Buffers

Sprung Wagon Buffers RCH style

Kit and Scratch builder's accessory. Pack contains sufficient parts for 4 Buffers

SR 12ton 8 Plank Open Wagon

Only the Southern had 8-plank open wagons, the type favoured by the SECR and LSWR. With many variations, this kit represents one of 3,000 built in 1926 – 1928. Lasted until the early ‘60s. Transfers for SR and BR. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings, 3 link couplings and transfers. This kit is supplied with pre-coloured moulded parts although painting can improve the appearance. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

SR 12ton Even Planked Ventilated Box Van Kit

1,000 of this design were built by the Southern Railway from 1936 to 1939. Extra vents and transfers are included for the Dover ferry van version. Glue and paints are required to complete this model.

SR 12ton Goods Van

Features the characteristic elliptical roof. This kit represents one of the 450 built 1929 – 1931. These vans lasted into the 1960s, and some found further use in departmental service. Transfers for SR and BR. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings, 3 link couplings and transfers. This kit is supplied with pre-coloured moulded parts although painting can improve the appearance. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

SR 12ton Uneven Planked Ventilated Box Van Kit

Built 1941 to 1944 by the Southern Railway, they also made 500 to the same design for the LMS and 650 for the GWR. Transfers are included; glue and paints are required to complete this model.

SR 20ton Sleeper Wagon

Introduced in 1928 (diagram 1771), and still in service carrying a wide variety of Civil Engineer’s materials on BR Southern Region. These finely moulded plastic wagon kits come complete with pin point axle wheels. Glue and paint will be required, along with appropriate transfers .

SR 25ton Goods Brake Van

Construction of this type began in 1929, lasting until 1933. They tended to be used on local and slow goods trains. After Nationalisation they migrated into the BR system, some lingering on into the 1970s and 1980s. Transfers for SR and BR. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings, 3 link couplings and transfers. This kit is supplied with pre-coloured moulded parts although painting can improve the appearance. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

SR Banana Van

200 of these vans were built in 1935 and lasted into the 1960s. They were not confined to the Southern, and could therefore be found throughout Britain, especially as bananas were imported through a number of ports. Transfers for SR and BR. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings, 3 link couplings and transfers. This kit is supplied with pre-coloured moulded parts although painting can improve the appearance. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

SR BY Utility Van

Introduced in 1937, these vans (diagram 3092) were used for parcel and mail traffic on branch or mainline trains. In service until the late 1970s. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings. Glue and paint will be required, along with appropriate transfers. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate

SR CCT Parcels Van

50 of these vans were built in 1938, with examples lasting into the 1980s and used to carry parcels, mail, luggage and motor vehicles. They were equally at home on branch line or main line trains. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings. Glue and paint will be required, along with appropriate transfers. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

SR Furniture Removals (Pack of 2)

An ideal load for a conflat or haulage vehicle, or as an accessory in a station yard or factory. Once dubbed 'the suitcase of industry' these railway containers were the precursor of the modern container, allowing a contained load to be quickly unloaded or transhipped from rail to road transport. (Pack of 2).

SR Furniture Removals Conflat Wagon with Container

Railway companies all had a stock of their own vehicles for carrying goods and merchandise around their network, and also onto other companies' routes as and when required. These were integrated into British Railways at Nationalisation; some of them to be once more re liveried under sectorisation as the network was prepared to be returned to private ownership. All Peco wagons feature free running wheels in pin point axles. The ELC coupling, whilst compatible with the standard N gauge couplings, keeps a realistic distance between the vehicles and enables the PL-25 electro magnetic decoupler to be used for remote uncoupling.

SR Goods Brake Van

These wagon and van kits are very quick and easy to assemble. Consisting of a one-piece pre coloured body moulding, chassis, chassis weight, disc wheels and couplings, they are essentially unpainted, unassembled versions of our famous ready to run range.

SR Insulated Van

75 insulated vans were built in 1931, and were used for meat and banana traffic. The carrying capacity was increased to 11 tons in the early 1940s, and lasted in service into the 1960s. Transfers for SR and BR. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings, 3 link couplings and transfers. This kit is supplied with pre-coloured moulded parts although painting can improve the appearance. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

SR Meat Van

The Southern built 100 of these vans between 1931 and 1934 to carry fresh meat from the West Country to principle markets in London and the Midlands. They lasted in service into the 1960s. The sliding doors made them quite unusual. Transfers for SR and BR. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings, 3 link couplings and transfers. This kit is supplied with pre-coloured moulded parts although painting can improve the appearance. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

SR PMV Parcels Van

This kit builds the basic SECR design, but has additional parts to model the SR built batches of the 1930s. These vehicles were used widely and examples still survive in departmental use. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings. Glue and paint will be required, along with appropriate transfers. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

SR Standard Cattle Wagon

The Southern built 299 of these vans between 1930 and 1939. Many of these wagons lasted into the 1960s, despite the decline in livestock traffic. Transfers for SR and BR. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings, 3 link couplings and transfers. This kit is supplied with pre-coloured moulded parts although painting can improve the appearance. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

SR Wagon Tarpaulin

OO Scale SR wagon tarpaulin, produced from a material that convincingly replicates the texture and look of canvas tarpaulins once commonly used on open wagons, to protect the contents underneath. Each product contains 8 tarpaulins.

SR Wagon Tarpaulin

O Scale SR wagon tarpaulin, produced from a material that convincingly replicates the texture and look of canvas tarpaulins once commonly used on open wagons, to protect the contents underneath. Each product contains 3 tarpaulins.

SR/BR 12ton Box Van with Plywood Sides Kit

First built in 1945, 2,500 of these vans were constructed of plywood owing to the post war shortage of other materials. Transfers and brass buffers included; glue and paint are required to complete this model.

SR/BR 28ton Bogie 'B' Van Kit

These vans were first built in 1937 and continued in use until 1986 on newspaper and mail trains. Transfers are included; glue and paints are required to complete this model.

Standard Box Van

These wagon and van kits are very quick and easy to assemble. Consisting of a one-piece pre coloured body moulding, chassis, chassis weight, disc wheels and couplings, they are essentially unpainted, unassembled versions of our famous ready to run range.

Tank Wagon

These wagon and van kits are very quick and easy to assemble. Consisting of a one-piece pre coloured body moulding, chassis, chassis weight, disc wheels and couplings, they are essentially unpainted, unassembled versions of our famous ready to run range.

Tank Wagon

These wagon and van kits are very quick and easy to assemble. Consisting of a one-piece pre coloured body moulding, chassis, chassis weight, disc wheels and couplings, they are essentially unpainted, unassembled versions of our famous ready to run range.

Tank Wagon National Benzole No.2003

Private owner wagons abounded prior to nationalisation, they would often be seen far from their base as they were sent to collect raw materials and supplies such as coal, and deliver finished goods. All Peco wagons feature free running wheels in pin point axles. The ELC coupling, whilst compatible with the standard N gauge couplings, keeps a realistic distance between vehicles and enables the PL-25 electro magnetic decoupler to be used for remote uncoupling.

Tank Wagon Tarmac No.128

Private owner wagons abounded prior to nationalisation, they would often be seen far from their base as they were sent to collect raw materials and supplies such as coal, and deliver finished goods. All Peco wagons feature free running wheels in pin point axles. The ELC coupling, whilst compatible with the standard N gauge couplings, keeps a realistic distance between vehicles and enables the PL-25 electro magnetic decoupler to be used for remote uncoupling.

Tarpaulin Open Wagon

These wagon and van kits are very quick and easy to assemble. Consisting of a one-piece pre coloured body moulding, chassis, chassis weight, disc wheels and couplings, they are essentially unpainted, unassembled versions of our famous ready to run range.

Teign Valley Granite 5 Plank Wagon

Private owner wagons abounded prior to nationalisation, they would often be seen far from their base as they were sent to collect raw materials and supplies such as coal, and deliver finished goods. All Peco wagons feature free running wheels in pin point axles. The ELC coupling, whilst compatible with the standard N gauge couplings, keeps a realistic distance between vehicles and enables the PL-25 electro magnetic decoupler to be used for remote uncoupling.

Timber, Natural

Each pack contains 4 loads; as supplied they each fit a standard wagon. The mouldings are designed to be split in half so that one and a half mouldings can be used to fit a 15ft open wagon.

Torpedo Ventilators Oval

Pack of 12. 0 Gauge Kit and scratch builders accessory.

Torpedo Ventilators, Round and Bonnet

12 Round Ventilators, 4 Bonnet Ventilators

Tralee and Dingle Railway 4-Wheel Chassis

These finely moulded plastic wagon kits come complete with pin point axle wheels. Glue and paint will be required, along with appropriate transfers.

Tralee and Dingle Railway Covered Cattle and Goods Van

These finely moulded plastic wagon kits come complete with pin point axle wheels. Glue and paint will be required, along with appropriate transfers.

Tralee and Dingle Railway Covered Goods Van

These finely moulded plastic wagon kits come complete with pin point axle wheels. Glue and paint will be required, along with appropriate transfers.

Tram Locomotive Kit

N scale narrow gauge White Metal loco body kit designed to run on Z Gauge track using a Marklin Miniclub(TM) chassis.

Transfers (Pressfix) for BR Grampus.

Transfers for early and post TOPS BR (from kit PS14)

Transfers (Waterslide) LMS/BR.

For LMS Box & Ventilated Vans (Kits PS07-10)

Transfers (Waterslide) LNER/BR from kits PS.3-PS-04 and PS11

Kit and Scratch builder's accessory.

Transfers (Waterslide) SR/BR.

SR 12 Ton Open and Box Van Transfers (from kits PS12-13)

Transfers (Waterslide)NBR/LNER from kits PS01-02

Kit and Scratch builder's accessory.

Trestle Set

Kit and scratch builders accessory; as included in the LNER/BR Trestle wagon kit PC17.

TT:120 7-Plank Open Wagon, BR

The first items of ready-to-run rolling stock in TT:120 scale from PECO are now available, representing a mixture of the post-grouping companies, British Railways and the first three private owner liveries.
TT:120 is the first British "true-to-scale" scale - 1/120 scale models running on 1/120 scale/gauge track. 
These new 7-plank wagons feature the highest standard of manufacturing you would expect from PECO:
  • Fine plastic moulding with thinner¬†wagon body walls for accuracy.
  • Interior detail as well as a high-level of exterior detail
  • Separately-fitted brake lever.
  • Brake shoes¬†in line with the¬†wheels
  • Ultra-fine printing detail
  • Free-running metal-tyred wheels
  • Standard (removable) TT:120 coupler compatible with other TT:120 rolling stock on the market

TT:120 7-Plank Open Wagon, Cadbury Bourneville

The first items of ready-to-run rolling stock in TT:120 scale from PECO are now available, representing a mixture of the post-grouping companies, British Railways and the first three private owner liveries.
TT:120 is the first British "true-to-scale" scale - 1/120 scale models running on 1/120 scale/gauge track. 
These new 7-plank wagons feature the highest standard of manufacturing you would expect from PECO:
  • Fine plastic moulding with thinner¬†wagon body walls for accuracy.
  • Interior detail as well as a high-level of exterior detail
  • Separately-fitted brake lever.
  • Brake shoes¬†in line with the¬†wheels
  • Ultra-fine printing detail
  • Free-running metal-tyred wheels
  • Standard (removable) TT:120 coupler compatible with other TT:120 rolling stock on the market

TT:120 7-Plank Open Wagon, Colman's Mustard

The first items of ready-to-run rolling stock in TT:120 scale from PECO are now available, representing a mixture of the post-grouping companies, British Railways and the first three private owner liveries.
TT:120 is the first British "true-to-scale" scale - 1/120 scale models running on 1/120 scale/gauge track. 
These new 7-plank wagons feature the highest standard of manufacturing you would expect from PECO:
  • Fine plastic moulding with thinner¬†wagon body walls for accuracy.
  • Interior detail as well as a high-level of exterior detail
  • Separately-fitted brake lever.
  • Brake shoes¬†in line with the¬†wheels
  • Ultra-fine printing detail
  • Free-running metal-tyred wheels
  • Standard (removable) TT:120 coupler compatible with other TT:120 rolling stock on the market
PAGE

Trade Login

WOULD YOU LIKE TO BECOME A TRADE PARTNER?

PECO - PLEASE SUPPLY TEXT.
An introductory paragraph with criteria listed as bullets points, closing with contact call to action.