Many small stations only had a loading platform for goods traffic, so required a store house for keeping goods safe and dry. The raised floor of this store both kept goods free from frost and was also a convenient height for loading. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 92mm x 60mm

A pair of abutments with 4 wing walls. Designed for use with the SS57 Vari Girder kit, LK-10 and 11 Girder Bridge sides and the SS26 Victorian style bridge but suitable for any bridge project. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 202mm x 96mm

Designed to complement the SS67 Country Station Building - some shelter for passengers awaiting a train from another platform. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 92mm x 60mm.

Designed for use with the SS62 Stone Paved Platform Ramps, SS78 Island Platform building, and SS54 Canopy. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint:264mm x 76mm.

Designed for use with the SS61 Stone paved platform sections. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 264mm x 76mm

This single track Tunnel Mouth is 133mm wide x 108mm high; total footprint is 180mm x 72mm including wing walls. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

This Plate Girder Bridge kit can be made up to suit the length of span required, and is therefore particularly useful where roads/ railways cross at an angle other than 90 degrees or where a long bridge is required. Maximum girder length 352mm. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

2 Garden sheds, each 57mm x 28mm. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

This 180mm long and 60mm wide Canopy is designed for use with the SS61 Platform sections and SS78 Island Platform building, but can be used with any suitable platform system. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Scratch and Kit builders accessory pack. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit includes:
‚Ģ 4 Semi - Circular brick arches - Internal Diameter 59mm, External Diameter 79mm
‚Ģ 4 Semi - Circular brick arches - Internal Diameter 39mm, External Diameter 53mm
‚Ģ 4 Semi - Circular brick arches - Internal Diameter 20mm, External Diameter 33mm
‚Ģ 16 Window Arches - Length 13mm

This classic Brick Arch Bridge can easily be made into a multiple arch structure with additional kits. Footprint 133mm x 70mm, (180mm x 190mm including wing walls). Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

A model of a fixed height derrick type jib crane, usually hand worked. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 81mm x 21mm.

A single track Decked Girder Bridge, includes stone abutments.Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 205mm x 67mm

Often seen with business premises in them, these Brick Retaining Arches measure 494mm long x 100mm high. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Based on the Saxby and Farmer design seen on many railways across Britain. Footprint: 90mm x 56mm + 40mm over staircase. The Ratio Signal Box Interior kit 553 will provide a wealth of interior detail. Don't forget SS89 Point Rodding, SS22 Lamp Huts and, of course, signals! Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit includes:
‚Ģ 864mm of Rustic Fencing
‚Ģ 1272mm of Picket Fencing

Scratch and Kit builders accessory pack. This kit contains:
‚Ģ 24 Tall chimney pots
‚Ģ 24 Short chimney pots
‚Ģ 2 Large chimney stack cappings (Takes 4 pots)
‚Ģ 2 Small chimney stack cappings (Takes 2 pots)
‚Ģ 8 x 80mm lengths of round roof ridges
‚Ģ 8 x 80mm lengths of angled roof ridges
‚Ģ 8 x 80mm lengths of chimney stack trim
‚Ģ 16 x 80mm lengths of guttering
‚Ģ 8 x 80mm lengths of small down pipes
‚Ģ 8 x 80mm lengths of large down pipes
‚Ģ 4 x 80mm lengths of barge board strips
‚Ģ 2 x 80mm lengths of window sill strips
‚Ģ 8 down pipe hoppers
‚Ģ 8 wall tie plates
‚Ģ 4 soot/drainage manhole covers

A single track Bow Plate Girder Bridge, includes stone abutments. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 203mm x 63mm

Scratch and Kit builders accessory pack. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit includes:
‚Ģ 3 assorted domestic doors plus optional assorted door surrounds
‚Ģ 12 assorted domestic window frames plus optional assorted window surrounds

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit includes:
‚Ģ 20 26mm wide Fence Panels including post
‚Ģ 4 12mm wide Gates including post plus 8 additional posts.

This scrapyard kit includes a stone shack and some ready made scrap.Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 98mm x 46mm

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit includes:
‚Ģ 15 39mm wide Fence Panels including post
‚Ģ 5 13mm wide Gates including post plus 10 additional posts.

Adds interest to an empty corner; a useful accessory not just for garages, but also scrapyards, farms, etc. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Approximate size: 32mm x 20mm x 15mm
Nineteen black tyres in a group with 16 piled and 3 leaning. A useful accessory not just for garages, but also scrapyards, farms, etc. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Approximate size: 40mm high
This fellow will brighten up a garage or tyre supplier's premises. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Approximate size: 85mm long x 67mm deep x 50mm high.
This building, based on a standard design, has brown brick walls with a curved corrugated iron roof. Details include a pair of large wooden doors (one with access door inset), two long windows on one side wall and a single back door and office window at the rear. Although 'Garage and Workshop' is displayed on the nameboard above the front doors, with this sticker removed the building would look right on a farm, airfield, barracks or commercial premises, placed singly or in multiple. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Approximate sizes: Island 75mm long x 15mm wide x 3mm thick, to hold the Air Pump (18mm x 10mm x 27mm), Oil Cabinet (16mm x 7mm x 19mm) and Tyre Rack (15mm x 8mm x 12mm).
The 'Free Air' pump has a clock face dial and coiled air line on the ground beside it, the oil cabinet has a semi-curved roof (Castrol type) and the rack holds four tyres, three standard and one large. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Assorted makes of fuel were available from independent garages who were not tied to any one supply company. As the 60s progressed , 'Solus' arrangements put an end to that freedom.
Size (mm) L85 x 16 x H37. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Level crossing keepers were often provided with a small house, so that the keeper was on hand 24 hours a day. The kit is also suitable for use as a gate lodge to a counrtry estate or in an urban park for the Park Keeper. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 98mm x 98mm

In the days long before digital readouts, petrol pumps had 'clock face' dials and delivered petrol in gallons. These three petrol pumps in BP colours are modelled from the 1960s originals. Size (mm) L85 x W16 x H37. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Size approx (mm) 12 x 14 x 17 The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

In the days long before digital readouts, petrol pumps had 'clock face' dials and delivered petrol in gallons. These three petrol pumps in Shell's colours are modelled from the 1960s originals.
Size (mm) L85 x W16 x H37. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

In the days long before digital readouts, petrol pumps had 'clock face' dials and delivered petrol in gallons. These three petrol pumps in Regent's colours are modelled from the 1960s originals.
Size (mm) L85 x W16 x H37. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

In the days long before digital readouts, petrol pumps had 'clock face' dials and delivered petrol in gallons. These three petrol pumps in National Benzole's colours are modelled from the 1960s originals.
Size (mm) L85 x W16 x H37. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

This modern roundabout with circular wall holds ground cover plants and bushes on top and has a cobbled perimeter to allow clearance for long vehicles to overrun.
Size (mm) 64 x 64 x 29. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Seen at most road junctions. Add your own graffiti!.
Size (mm) 11 x 13 x 15 The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

The modern traffic separator with bollards at each end.
Size approx (mm) 98 x 30 x 21 The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

As a poignant reminder of our nation's history, most cities, towns and villages have a memorial to their fallen heroes. This two part model has a 1st World War soldier figurine in his Great Coat, head bowed and with rifle reversed, standing atop a stone pillar. Geranium borders surround three sides and a poppy wreath rests at the foot of the plinth.
Size (mm) 56 x 56 x 56. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

A most common sight on the pavement on refuse collection day, in an alternative green colour.
Size (mm) 6 x 7 x 19. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

The modern answer to waste management, seen on the streets of towns and cities throughout the country.
Size approx (mm) 24 x 20 x 24. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Used to allow cattle or storm water to pass through an embankment. Pack of 2. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 64mm x 60mm plus wing walls.

A most common sight on the pavement on refuse collection day, in standard black.
Size (mm) 6 x 7 x 19. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Now a common sight in most parts of the country, in an alternative green colour.
Size (mm) 6 x 7 x 15. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Now a common sight in most parts of the country, these bins appear in standard black.
Size (mm) 6 x 7 x 15. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Useful clutter for streets, pavements and backyards. This pack contains five items: a pile of paving slabs, a square litter bin, a large waste bin, a heap of filled black poly bin bags and a telecommunications cabinet with graffiti. Please note: contents may vary slightly to those pictured. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

A standard design of waste bins.
Size (mm) 10 x 10 x 15. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

The most commn type of litter bins in use today.
Size (mm) 8 x 8 x 17. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Street traders use theese type of stalls to sell a whole range of produce from fruit and vegeatables through to clothing and household goods. 2 carts in each pack. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 41mm x 21mm each.