Commercial vehicles arriving with goods to transport by rail were weighed to work out their levy. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 82mm x 81mm

A small signal box as would be seen at a small country station, or controlling the exit from a yard or industrial area. Use SS89 Point Rodding to fill in this important detail on your layout. Footprint:48mm x 36mm.

Modern type crossing barriers complete with dummy light standards. Can be used with the Peco N Setrack Level Crossings ST-20/21.

A detailed kit for a classic and very long lived semaphore signal

Kit of a useful general purpose type crane, also often seen at canal basins etc.

Set of six.

An essential piece of equipment that was placed near the exit from every goods yard, along with a catch turnout, signal etc.

6 assorted cases

Single moulding, no assembly required.

Often seen in the loco yard or near the platform end. Use LK-2 Water Cranes if additional cranes are required.

Adds the finishing touches to any signal box (See Ratio 500, 503, 536, 552 and Wills SS48 kits); it contains all you need to fit out a typical signal box including a 20-lever frame and a level crossing operating wheel. Glue and paints required to complete model.

A essential feature on steam era main lines for over 100 years; this kit contains parts to make 760mm of troughs and includes relevant signboards. Use in conjunction with the large Water Tower (Ref 551). Glue and paints are required to complete this model.

With its fine scale latticework and curved section roof, this typical footbridge will add interest and a sense of importance to any model station.The versatile kit design means that the stairs can be assembled to face in either direction or straight off the end of the bridge. Additional kits can be used to create multiple spans, whilst larger, busier stations often had 2 stairways to each platform, leading off in both directions. Could also be used without the roof sections at a large terminus under an overall station canopy. Supplied with pre-coloured parts although painting and/or weathering (See the Pecoscene Weathering Powder range PS-360 - 365) can add realism; glue is required to complete this model. Span: 180mm

These towers are an impressive sight and were an essential feature on mainline railways. The Pecoscene ranges provide the perfect loading material, Real Coal (PS-330 -332), Limestone (PS-342 and 3), Sand (PS-344), Iron Ore (PS-340), Grey Stone (PS-300- 307), and Brown Stone (PS-310 - 317) for a quarry, mine or pit loading hopper. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint: 116mm x 92mm, Height 181mm

The kit comprises a coaling stage, water tower with crane, and a hoist for loading the coal. This model and the Engine Shed kit (Ref 522) make a good starting point for any layout in need of steam engine facilities. The Pecoscene Real Coal range (PS-330 -332) provides the perfect addition, as do the Pecoscene Ash and Cinder Scatter Materials (PS-320 - 322). An Inspection Pit (Peco LK-56/156) was also a common feature. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder PS-362 Coal Dust); glue is required to complete this model. Footprint: 140mm x 80mm

Oil depot for distribution of domestic oil, which was transferred to road vehicles to deliver to domestic customers. Kit includes hut, base , pipe fittings, catwalk, ladders and Esso transfers. The Peco Wonderful Wagons Petrol Tanker Kits R-75RD and R-75S kits can be used as delivery vehicles. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 180mm x 95mm

Stone edged platform with brick support will make up various combinations of platform; glue and paints required to complete model. See also Modelscene Station Staff 5059, Passengers Standing Sets A and B 5057 and 5058. Footprint: 480mm x 92mm

A Southern Railway design that will span 2 tracks and includes lamps and smoke deflectors. Glue and paints required to complete model. Span 150mm.

4 x 143mm lengths of laddering.

A common feature of country stations large and small, whilst market town cattle docks could be very large indeed. Our model is of the one at Yeovil Pen Mill (GWR) Station, Somerset. Livestock (Modelscene Cows Ref. 5100, Sheep and Lambs Ref. 5110, Pigs Ref. 5108, and Horses Ref.5105) was conveyed on British railways until around 1973, although many cattle docks remained in place unused, becoming overgrown - an interesting scenic feature. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 170mm x 110mm

Stations often had these Water Cranes at the end of the platforms so the locomotives could be refilled without detaching them from the train. Also included is a coke brazier, called a 'fire devil' to keep the cast iron pipe from freezing up during the winter. These cranes were usually supplied by a large water tank (see Ratio 506 and 551 and Wills SS34 kits). Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

A more modern trackside detail, concrete trunking (SS87) would carry the cabling along the lineside between boxes. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Traditional wooden type gates (complete with separate pedestrian access gates), giving double track spacing when closed across railway tracks.

Kit for single track level crossing gates.

Pioneered by the Southern Railway but since seen almost everywhere.

Kit of a useful general purpose type crane, also often seen at canal basins etc.

24 Churns, once a common site on station platforms.

Modular design, makes it easy to assemble pits of any required length. A great addition to the LK-80 Modern Train Shed unit or create a modern diesel/EMU servicing shed using the Wills SSM300 Modern Industrial Building and SSM315 Extension kits.

Used for loading goods onto wagons, these cranes were to be found by bay platforms in small stations with no goods sheds or in the yard of larger stations. The kit includes fine chain for the operating drive wheels and cord for the jib. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model.

Suitable for extending the Coal Depot (Ref 532) or as a stand alone item. The Ratio 526 Coal Sacks kit and Peco Scene Real Coal Refs PS-330,1 and 2 can provide extra detailing. Glue and paints required to complete model. Footprint: 75mm x 32mm

16 Telegraph poles, these also carried railway bell codes and phone connections between signal boxes and stations as well as GPO lines. Height 100mm

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

An assortment of White Metal clutter including wheels ladders, crates, and items that could be found on the farms of yesteryear. The Wills scenic series provides a range of simple to make kits that help to change your layout into a model railway that contains real life detail.

An extra 2000mm of rodding to extend that included in the SS89 Point Rodding kit. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Every manual Signal Box had point rodding extending to all the turnouts under its' control, an interesting extra detail that will make your layout more realistic. Kit includes 1120mm of rodding plus support cradles, cranks and other details.Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

A kit depicting the levers necessary to control isolated industrial and country sidings; contains 2 frames as illustrated. Don't forget the point rodding (SS89 and 90); catch points, ground signals/signals and loading gauges where appropriate. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Scratch and kit builders accessory pack. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit includes:
‚Ģ 5 assorted doors
‚Ģ Pentice roof and supports (to go over a door)
‚Ģ 2 Domestic gatess
‚Ģ 15 assorted domestic windows
‚Ģ 7 assorted decorative window lintels

Enables you to make a building into a water mill. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Additional piers for the SS80 Viaduct kit; can also be used with the Vari Girder (Ref. SS57), Bow (Ref. SS47), Plate (Ref. LK-10) and Truss (Ref. LK-11) Girder Bridge sides to construct a wide variety of ubiquitous viaducts. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Height 165mm, width 34mm each

Scratch and Kit builders accessory pack.This kit includes sufficient parts to construct parapet bridge walls for a single track overbridge 131mm Long including capping stones and end piers. Easily extended using additional kits. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

This Island Platform building is designed to be used with the Wills SS61 Platform and SS54 Canopy, and can easily be adapted to make a larger building using additional kits.Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 92mm x 60mm.

Gives interest to a kit building - and can hide unsightly corners! Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit contains:
‚Ģ 8 79mm long straight pavement sections
‚Ģ 2 corner units

A typical rural bus shelter to add interest to a village or small town scene. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 52mm x 35mm.

Add interest to your village centre with these generic structures. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. footprint: 76mm x 59mm.

Timber yards and Builders merchants premises offer possibilities of extra variety of traffic into the station goods yard. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

This model can be used to add interest to a rural scene; also useful for wargamers. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 57mm x 49mm

Often seen with business premises in them, these Stone Retaining Arches measure 494mm long x 90mm high. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.