Kit includes 6 pit mouldings (total length 297mm), 2 pairs of steps and 4 walkway plates. The modular design makes it easy to assemble pits of any length. With several kits you can model the train length pits seen at many maintenance depots; a great addition to the LK-80 Modern Train Shed unit or create a modern diesel/EMU servicing shed using the Wills SSM300 Modern Industrial Building and SSM315 Extension kits.

Peco Streamline Code 75 track meets the standards of enthusiasts who prefer to run trains on scale height rail. This rail height is used for our 00/H0 Fine Standard Track Systems (Ref nos. SL-100F, 102F, 104F, 106F) and our H0m (SL-1400) and H0n3 (SL-1500) track ranges; these joiners can also be used with the Code 83 Line American range (SL-8300 and 8302) and Code 75 Bullhead track (SL-108F).

Design prevents adjacent rails from touching whilst holding them in alignment. Insulated rail joiners are required to provide electrical breaks where Electrofrog turnouts are used, for more details see our Wiring the Layout publications Nos 4 and 21.

Designed to be used with our 00/H0 Code 100 track systems (Ref nos. SL-100 and 102); also with 0 Gauge Bullhead (SL-700BH) and 0-16.5/0n30 (SL-500) track systems.

Design prevents adjacent rails from touching whilst holding them in alignment. Insulated rail joiners are required to provide electrical breaks where Electrofrog turnouts are used, for more details see our Wiring the Layout publications Nos 4 and 21.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

The Setrack Level Crossings can be positioned virtually anywhere on your layout. There are four radii available in curved crossings, plus the straight crossing and add on unit . These simply clip together so that you can cross up to four tracks on a curve and any number of tracks on the straight. They are supplied with traditional gates as standard, LK-51 modern barriers can be substituted if required.

PECO Setrack 00 Gauge Code 100 - Unit trackage System is a high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

The PECO Streamline OO Bullhead track range has shaped up to be a very comprehensive system comprising flexible track, bullhead joiners, buffer stop, large radius and medium radius turnouts , a crossing and two slips. There's enough there already for modellers to build a truly authentic steam to diesel transition period layout.

The PECO Streamline OO Bullhead track range has shaped up to be a very comprehensive system comprising flexible track, bullhead joiners, buffer stop, large radius and medium radius turnouts , a crossing and two slips. There's enough there already for modellers to build a truly authentic steam to diesel transition period layout.

The NEW Unifrog Conversion

The latest conversion to Unifrog is now available. This time we have updated the Streamline OO/HO scale Code 100 Small Radius "Y" turnout to conform to this new format. Produced from brand new tooling this replaced the former Insulfrog and Electrofrog SL-97 and SL-E97 (both of these are now discontinued and out of stock).

Y Turnouts are really useful track components - their main benefit being as great space-savers. By combining the Y with the short crossing you can create a tight radius double junction and using several Ys together allows you to fit more routes in a restricted space. Ideal when building small loco yards and goods sidings. It's what the real railways would have done after all! 

The Unifrog Conversion

On a Unifrog turnout the frog tip and wing rails are electrically isolated from all other rails. The turnout can be used as supplied on a DC or DCC layout without any modification, using the standard SL-10 rail joiner. If desired, the frog tip and wing rails can be powered by connecting the wire welded underneath to a changeover switch or microswitch working in unison with one of our turnout motors. Basically, as supplied the turnout operates as an Insulfrog turnout. If the frog is powered then it operates as an Electrofrog turnout. So, the best of both worlds in one unit!

PECO Streamline transition track for connecting Code 83 and Code 70 track.

Whilst our HO Code 83 track is perfect for modelling American mainlines, this new Code 70 track is just right for secondary lines, lightly-used branches, sidings, etc. Indeed, it will be perfect for modelling the early-to-mid 20th century railroading era when lighter rail was more commonly used. Featuring accurate rail spike detail, correctly proportioned ties (sleepers) and nickel silver rail, this new flexible track has been produced to the same high standard that modellers have come to expect from PECO and confirms to the specifications laid down by the NMRA.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

Simply attach the wires from the controller output and connect the clips to opposing rails. For a secure connection without soldering use the PL-31 Push on Terminal Connectors PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Peco Streamline Code 75 track meets the standards of enthusiasts who prefer to run trains on scale height rail. This rail height is used for our 00/H0 Fine Standard Track Systems (Ref nos. SL-100F, 102F, 104F, 106F) and our H0m (SL-1400) and H0n3 (SL-1500) track ranges; these joiners can also be used with the Code 83 Line American range (SL-8300 and 8302) and Code 75 Bullhead track (SL-108F). Insulated rail joiners are required to provide electrical breaks where Electrofrog turnouts are used, for more details see our Wiring the Layout publications Nos 4 and 21.

Makes re-railing steam locos and bogie vehicles simple - less handling too.

Also suitable for re-railing 0-16.5/0n30 locomotives and stock.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary. This curve matches the ST-247 Y Turnout.