After loading, open wagons were checked for height using this simple gauge to ensure that loads did not hit bridges etc. and therefore were usually placed near the yard exit. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

This kit builds the basic SECR design, but has additional parts to model the SR built batches of the 1930s. These vehicles were used widely and examples still survive in departmental use. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings. Glue and paint will be required, along with appropriate transfers. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

Part of the Ratio 'Quick Assembly' family of signals. These allow you to make home and distant signals quickly and easily. They include signal operating wire and lever. This kit enables you to replicate a Southern Railway rail built signal, either as a Home, Distant or combined Home and Distant signal. Glue and paints required to complete model.

First built in 1945, 2,500 of these vans were constructed of plywood owing to the post war shortage of other materials. Transfers and brass buffers included; glue and paint are required to complete this model.

These vans were first built in 1937 and continued in use until 1986 on newspaper and mail trains. Transfers are included; glue and paints are required to complete this model.

Ideally suited for building sites, etc but can be used as wagon loads.
Size approx (mm) L54 x W28 x H23. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Fully painted figures to add to your station or street scenes.

Fully painted figures to add to your station.

Pack contains 5 standing people for all OO scenes. Each pack contains 5 different characters all hand painted.

This pack includes:

• 3 x ST-200 Standard Straights
• 5 x ST-201 Double Straights
• 1 x ST-202 Short Straight
• 3 x ST-225 2nd Radius Standard Curves
• 7 x ST-226 2nd Radius Double Curves
• 1 x ST-240 Right Hand Turnout
• 1 x ST-241 Left Hand Turnout
• 2 x ST-270 Buffer Stops
• 1 x ST-273 Power Connecting Clips
• 1 x STP-00 Setrack Planbook

This Set can be used in conjunction with the ST-101 3rd Radius Starter Track Set to make a double track layout.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary. This Starter Set includes a circle of Second Radius track, plus straights and 2 Turnouts to make a layout in a number of combinations. Buffer stops, power clips, and the 00 Setrack Planbook are also included.

This pack includes:

• 2 x ST-200 Standard Straights
• 4 x ST-201 Double Straights
• 8 x ST-231 3rd Radius Double Curves
• 2 x ST-240 Right Hand Turnouts
• 2 x ST-270 Buffer Stops
• 1 x ST -273 Power Connecting Clips
• 1 x STP-00 Setrack Planbook

This Set can be used in conjunction with the ST-100 2nd Radius Starter Track Set to make a double track layout.

PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains. Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops. The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

Placed at the foot of platform end ramps, barrow crossings allow light goods and luggage to be transferred across a double track to an adjoining platform by railway staff. Glue and paints required to complete model.

A model of the station at Castle Cary, Somerset. Although of typically GWR design, it can be adapted to suit that of other railway companies. The kit includes notice boards, telephone and first aid boxes. See also Modelscene Station Staff 5059, Passengers Standing Sets A and B 5057 and 5058 and Passengers Seated Ref. 5056. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 210mm x 135mm (inc. canopy)

This 180mm long and 60mm wide Canopy is designed for use with the SS61 Platform sections and SS78 Island Platform building, but can be used with any suitable platform system. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Here is the clock, the town clock, telling the time for....
No town (or large station) is complete without an imposing clock tower! With its honey coloured dressed stone tower and four clock faces, this is an elegant model.
Size: 91mm high x 33mm square. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains:
• 340mm of Straight Fencing
• 2 x 102mm lengths of Ramp Fencing
• 1 Large and 1 Small Gate
• 2 Ramp Gates
• 1 Ticket Gate

A parade of shops for the station approach or under the railway embankment. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 138mm x 9mm

A 1930's style garage and petrol station. Pumps included. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 114mm x 84mm.

A spartan passenger station seen in rural areas. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 185mm x 30mm.

A spartan passenger station seen in rural areas, a shelter is provided for waiting passengers. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 220mm x 50mm.

This kit will make 2 Station houses; assembly can be varied , extra doors and windows are included.

This kit will make 2 Station houses; assembly can be varied; extra doors and windows are included.

Pack of 3 free standing Station Nameboards, ready for your own station name.

Pack contains 4 Station Nameboards and transfer lettering to make up the name of your choice.

Pack contains 2 each of the following signs: Way Out, To The Trains, Station Master, Booking Office, Parcel Office, Waiting Room, Refreshments, Gentlemen, Ladies Room, Platform 1, Platform 2, Platform 3, Platform 4, and Running in Boards with 8 sets of the alphabet to make up the desired station name. Painting is required.

Designed to complement the SS67 Country Station Building - some shelter for passengers awaiting a train from another platform. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 92mm x 60mm.

This plastic kit contains a platform shelter plus a timber hut.

Fully painted figures to add to your station or street scenes.

Kit and scratch builders accessory, 724mm of station canopy valancing and 6 notice boards.

A statue of this famous engineer will make a nice feature for a town square or station forecourt.
Size approx (mm) 30 x 30 x 80. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

There are many places around the country where a statue of Queen Victoria may be found. A nice feature for a town square or station forecourt.
Size approx (mm) 30 x 30 x 80. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

A versatile load for a lorry or house building plot.
Size (mm) 60 x 27 x 14. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Incorporate these units into public areas to improve the environment ...but they can also be used on station platforms and in town squares.
Size (mm) 55 x 17 x 16. Can be used in conjunction with SS 331.
Size approx (mm) L42 x W25 x H15. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

The essential items for all stations until recently was a goods shed. Inside, dry goods were stored and transhipped from road to rail via the internal platform. The shed usually had a crane (Ref 531) or hoist (Ref 543) inside, whilst pallets and sacks (Ref 514) would be seen stacked around the site. A good example of this type of goods shed can still be seen standing in Ross on Wye, long after the railway has disappeared. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 155mm x 170mm

Additional piers for the SS80 Viaduct kit; can also be used with the Vari Girder (Ref. SS57), Bow (Ref. SS47), Plate (Ref. LK-10) and Truss (Ref. LK-11) Girder Bridge sides to construct a wide variety of ubiquitous viaducts. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Height 165mm, width 34mm each

Often seen with business premises in them, these Stone Retaining Arches measure 494mm long x 90mm high. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Pack contains 7 pieces.