A useful cover for passengers awaiting their train. Several kits can be combined to protect a long platform, they can also be used side by side. Glue and paints required to complete model. Footprint: 270mm x 52mm

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.

Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.

Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.

Fully detailed, injection moulded plastic sections of platform edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.

Fully detailed, injection moulded plastic sections of platform edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.

Fully detailed, injection moulded plastic sections of platform edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

Designed for use with the SS61 Stone paved platform sections. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 264mm x 76mm

Pack of 12 seats, see Modelscene 5056 Seated Passengers Set.

Pack of 12 seats, see Modelscene 5056 Seated Passengers Set.

Designed for use with the SS62 Stone Paved Platform Ramps, SS78 Island Platform building, and SS54 Canopy. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint:264mm x 76mm.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

Designed to be placed on a platform or as a ground level box, includes fire buckets and lamp. The Ratio Signal Box Interior kit 553 will provide a wealth of interior detail. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 65mm x 50mm

Stone edged platform with brick support will make up various combinations of platform; glue and paints required to complete model. See also Modelscene Station Staff 5059, Passengers Standing Sets A and B 5057 and 5058. Footprint: 480mm x 92mm

Pack contains 5 fully painted figures to look busy around your station.

Pack includes 8 pieces

Pack contains simple kits to make 6 Post Boxes; 2 Pillar, 2 Post Mounted, 2 Wall Mounted. Simple painting is required for realism

The Craftsman series from Wills offers the more experienced modeller a cost effective way to make large, highly individual models. They cover a range of typically British buildings both railway and domestic; each kit includes plastic moulded materials sheets, detailed parts, illustrated instructions and templates. The use of sheet materials rather than moulded parts for the main components allows the opportunity to easily modify the design to suit your needs. Should you wish to extend the building the same materials sheets are available separately (see the Wills Materials Pack range). Similarly it would be easy to add additional doors and/or windows if required.

Simply attach the wires from the controller output and connect the clips to opposing rails. For a secure connection without soldering use the PL-31 Push on Terminal Connectors PECO Setrack 00 Gauge Code 100 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

A Gantry to support signals, such as the semaphore signals in our Advanced Construction packs Ref 466 (GWR), 476(LMS), 477(LNWR) and 486(LNER/SR). It can also be used to mount colour light signals, and route and platform indicators. Glue and paints required to complete model.

Built in the 1920s, these vehicles carried grain to distilleries, breweries and flour mills. Examples of these interesting wagons lasted in service until as late as 1970. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings. Glue and paint will be required, along with appropriate transfers . Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

The Southern Railway used these concrete sheds for storage of goods and animal feed. The characteristic short concrete piles raise the floor above ground level to keep out the damp and rodents. Glue and paints required to complete model. Footprint: 90mm x 70mm

Pack contains 5 fully painted official figures.

A typical building provided by local authorities in parks and public places. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 77mm x 56mm

This versatile building would contain a boiler to provide steam either for a pump raising water or to generate electricity for a small factory. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 110mm x 90mm

Gives interest to a kit building - and can hide unsightly corners! Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Pack contains 5 fully painted RAF Personnel figures.

Peco Streamline Code 75 track meets the standards of enthusiasts who prefer to run trains on scale height rail. This rail height is used for our 00/H0 Fine Standard Track Systems (Ref nos. SL-100F, 102F, 104F, 106F) and our H0m (SL-1400) and H0n3 (SL-1500) track ranges; these joiners can also be used with the Code 83 Line American range (SL-8300 and 8302) and Code 75 Bullhead track (SL-108F). Insulated rail joiners are required to provide electrical breaks where Electrofrog turnouts are used, for more details see our Wiring the Layout publications Nos 4 and 21.

An ideal load for the Scammell Mechanical Horse (Ref 5015) or a conflat wagon, or as a yard accesory or store.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

7-plank 12 ton Coal Wagon RCH Design 1923 Many thousands of these wagons were built to a standard Railway Carriage House design between the wars. This type was also used by both the LNER and LMS. Widely used until the early 1960s. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings. Glue and paint will be required, along with appropriate transfers. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

5-plank 12 ton Mineral Wagon (Fixed Ends) RCH 1923 Built in the 1920s to carry roadstone, built to a Charles Robert design with steel sheet floor. Some lasted into the 1960s. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings. Glue and paint will be required, along with appropriate transfers. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

7-plank 12 ton Coal Wagon (Fixed Ends) RCH 1923 Thousands of these wagons were built to a standard Railway Clearing House design between the wars, mainly for coal merchants. Latterly in BR stock, they lasted into the early 1960s. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings. Glue and paint will be required, along with appropriate transfers. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

8-plank 12 ton Coal Wagon RCH Design 1923 Many thousands of these wagons were built to a standard Railway Clearing House design between the wars, for collieries and coal merchants. Latterly in BR stock, they lasted into the early 1960s. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings. Glue and paint will be required, along with appropriate transfers. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

Makes re-railing steam locos and bogie vehicles simple - less handling too.

Also suitable for re-railing 0-16.5/0n30 locomotives and stock.

A more modern trackside detail, concrete trunking (SS87) would carry the cabling along the lineside between boxes. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

A more modern trackside detail, concrete trunking (SS87) would carry the cabling along the lineside between boxes. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

A feature often seen on the modern railway.

Often seen supporting railway cuttings and embankments in urban areas where there is insufficient space for earth slopes. Make cuttings, yard walls or raised railway viaducts with these versatile sections. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Length 350mm, Height 45mm

Ideal for bringing a road or path over a small river or canal. The Wills scenic series provides a range of simple to make kits that help to change your layout into a model railway that contains real life detail. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Height 68mm.

To fit under the Ratio Locomotive Lifting Hoist (545) or Overhead Traversing Crane (546) to allow them to run along tracks (not included). The kit makes a pair of rolling underframes. Length 61mm.

Scratch and Kit builders accessory pack. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit includes:
‚Ģ 9 35mm high, 21mm wide Round Top Window Frames
‚Ģ 4 134mm long, 77mm high English Bond Brick Sheets (Matches SSMP227) each with 2 semi prepared Round Top Window Apertures
‚Ģ 8 Semi - Circular brick arches - Internal Diameter 20mm, External Diameter 33mm
‚Ģ Clear plastic glazing

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.