This type of urinal, consisting of cast iron screens but otherwise open to the elements was found at busy locations in city centres and railway stations. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 92mm x 34mm.

A building to complement the SSAM101 Blacksmith Set. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 84mm x 55mm.

Add interest to your village centre with these generic structures. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. footprint: 76mm x 59mm.

Usually supplied by a water tower (See LK-1, Ratio 506, 540, 551 and Wills SS34 kits).

Stations often had these Water Cranes at the end of the platforms so the locomotives could be refilled without detaching them from the train. Also included is a coke brazier, called a 'fire devil' to keep the cast iron pipe from freezing up during the winter. These cranes were usually supplied by a large water tank (see Ratio 506 and 551 and Wills SS34 kits). Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

A fairly universal design seen at many steam loco depots. The kit includes water gauge, water crane, fire buckets and lamp. Use the Ratio 413 Water Crane and Fire Devil kit if further cranes are required. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 90mm x 60mm

Often seen in the loco yard or near the platform end. Use LK-2 Water Cranes if additional cranes are required.

A raised water supply for an engine shed or to supply platform water cranes (See Ratio 413 and Peco LK-2 Water Cranes, also Ratio 550 Water Troughs). Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 66mm x 55mm.

Water towers with cranes were generally used on platforms and in other areas with restricted space. This kit will build either a tower with a flat top or the familiar GWR conical type. Includes stove, water crane etc. as well as etched brass chain and ladder; glue and paints required to complete model. Use the Ratio Water Crane and Fire Devil Kit 413 if further cranes are required.

A essential feature on steam era main lines for over 100 years; this kit contains parts to make 760mm of troughs and includes relevant signboards. Use in conjunction with the large Water Tower (Ref 551). Glue and paints are required to complete this model.

Enables you to make a building into a water mill. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

This building provides a ticket office, waiting room and parcels facilities. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 116mm x 60mm

Many goods yards had weigh bridges so that the 'carriage price' of a load to be carried by rail could be costed. Goods were then loaded into the goods shed. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint; Weighing Deck 85mm x 50mm, hut 45mm x 35mm.

Commercial vehicles arriving with goods to transport by rail were weighed to work out their levy. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 82mm x 81mm

Pack of 4, 2 different types.

The NEW West Highland Line Platform Mounted Signal Box Laser-Cut Kit

The NEW West Highland laser-cut wood kits, all based on buildings on the existing West Highland Line extension between Fort William and Mallaig in Scotland. In fact Arisaig station was the inspiration for these attractive models, a delightful station on a very scenic and popular route, famous for many reasons but likely to be moist memorable for its role in the Harry Potter films. It is a route that has become a firm favourite with modellers so these kits will certainly be welcomed by many and be the inspiration for a number of new layout builds for sure.

FOOTPRINT (INC. ROOF OVERHANG) 65 X 65mm

The NEW West Highland Line Platform Shelter Laser-Cut Kit

The NEW West Highland laser-cut wood kits, all based on buildings on the existing West Highland Line extension between Fort William and Mallaig in Scotland. In fact Arisaig station was the inspiration for these attractive models, a delightful station on a very scenic and popular route, famous for many reasons but likely to be moist memorable for its role in the Harry Potter films. It is a route that has become a firm favourite with modellers so these kits will certainly be welcomed by many and be the inspiration for a number of new layout builds for sure.

Built by the North British Railway, the West Highland Line travelled through a stunning part of the country and soon became popular with tourists as well as providing an essential link to the outside world from the sparsely populated Highland areas. The station buildings are particularly attractive and our kit of the station at Arisaig personifies that appealing design.

The NEW Rannoch Station Wooden Laser-Cut Kit

The style of Rannoch Station building, built in 1894, is typical of the type of structure found on the North British-built line from Glasgow to Fort William. Sitting on an island platform this is a long building, so consequently the model created from this kit is certainly impressive! By contrast the platform-mounted signal box is quite diminutive when compared with the station, but both structures possess the stylish "Swiss Cottage" style of construction and consequently are very attractive.

Despite its size we have designed the station kit to be as easy to construct as possible, with carefully designed parts that fit snuggly together and the assembly instructions are clear and informative. It would not surprise us if the signal box kit is adapted for other uses, such as a shelter, tea room, waiting room or greenhouse: it has many possibilities! The kits feature some incredible detail and texture, something that we have been working really hard to achieve - so much better than the basic appearance of so many other laser cut kits available on the market.

FOOTPRINT (INC. CANOPY OVERHANG) 460mm x 114mm

The NEW West Highland Line Signal Box Laser-Cut Kit

The NEW West Highland laser-cut wood kits, all based on buildings on the existing West Highland Line extension between Fort William and Mallaig in Scotland. In fact Arisaig station was the inspiration for these attractive models, a delightful station on a very scenic and popular route, famous for many reasons but likely to be moist memorable for its role in the Harry Potter films. It is a route that has become a firm favourite with modellers so these kits will certainly be welcomed by many and be the inspiration for a number of new layout builds for sure.

The NEW West Highland Line Station Building Laser-Cut Kit

The NEW West Highland laser-cut wood kits, all based on buildings on the existing West Highland Line extension between Fort William and Mallaig in Scotland. In fact Arisaig station was the inspiration for these attractive models, a delightful station on a very scenic and popular route, famous for many reasons but likely to be moist memorable for its role in the Harry Potter films. It is a route that has become a firm favourite with modellers so these kits will certainly be welcomed by many and be the inspiration for a number of new layout builds for sure.

Scratch and Kit builders accessory pack. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit includes:
• 3 assorted domestic doors plus optional assorted door surrounds
• 12 assorted domestic window frames plus optional assorted window surrounds

Scratch and kit builders accessory pack. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit includes:
• 5 assorted doors
• Pentice roof and supports (to go over a door)
• 2 Domestic gatess
• 15 assorted domestic windows
• 7 assorted decorative window lintels

2 huts for shelter and tool storage or with many other uses; platelayers huts, tool stores, lamp huts etc. - even garden/allotment sheds or temporary site huts. Glue and paints required to complete model. Footprint: 42mm x 32mm each

A accurately laser cut wood kit supplemented by injection moulded roof, windows and doors. Glue and paints required to complete model.