Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit contains:
‚Ģ 8 79mm long straight pavement sections
‚Ģ 2 corner units

Pack contains 14 pre-coloured Pigs

Pack contains 7 pigs and a pre-coloured Trough.

This model can be used to add interest to a rural scene; also useful for wargamers. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 57mm x 49mm

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

Approx 25 bearings for pin pointed wheelsets.

Can be used with Wills SS83 Stone Piers to create an impressive viaduct as seen on many railways around the world. Detailed plastic moulding supplied 2 in a pack.

These wagon and van kits are very quick and easy to assemble. Consisting of a one-piece pre coloured body moulding, chassis, chassis weight, disc wheels and couplings, they are essentially unpainted, unassembled versions of our famous ready to run range.

Railway companies all had a stock of their own vehicles for carrying goods and merchandise around their network, and also onto other companies' routes as and when required. These were integrated into British Railways at Nationalisation; some of them to be once more re liveried under sectorisation as the network was prepared to be returned to private ownership. All Peco wagons feature free running wheels in pin point axles. The ELC coupling, whilst compatible with the standard N gauge couplings, keeps a realistic distance between the vehicles and enables the PL-25 electro magnetic decoupler to be used for remote uncoupling.

LNER/LMS/BR Wagon Transfers: Plate, Double Bolster and Trestle (from kits PS19/20 and 21).

A ubiquitous structure found on every railway.

The platelayers who maintained the track used huts like these for storing tools, shelter - and, of course, for somewhere to make a brew! Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 58mm x 44mm.

A selection of traditional track maintenance tools, which could be put with the OP-11 Workmen figures.

This kit includes 2 each of: Running in boards, chocolate machines, trolleys, sack trucks plus a selection of station signs. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

This new kit brings the range of platform accessories into contemporary times. A ticket kiosk, information and timetable boards, a ticket machine, ticket barriers, and CRT screens are all represented in this comprehensive kit. Moulded in red plastic, the models are easy to assemble, and painting would be necessary to bring out the detail. Suitable for all regions in the UK, the models nevertheless recall memories of "Network South East" of the 1980s!

Pack contains simple kits to make 1 large Station Clock, 1 Litter Bin, 3 Fire Buckets and Rack, 4 Tannoy Speakers. Painting is required for realism.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

Fully detailed, injection moulded plastic sections of platform edging; these units can be curved if desired. Use with Ratio 308 Flag Stones or other surface material cut to the desired platform shape. (There are 5 lengths of edging per pack).

Fully detailed, injection moulded plastic sections of platform edging; these units can be curved if desired. Use with Ratio 308 Flag Stones or other surface material cut to the desired platform shape. (There are 5 lengths of edging per pack).

Fully detailed, injection moulded plastic sections of platform edging; these units can be curved if desired. Use with Ratio 308 Flag Stones or other surface material cut to the desired platform shape. (There are 5 lengths of edging per pack).

Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.

Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.

Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.

Fully detailed, injection moulded plastic sections of platform edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.

Fully detailed, injection moulded plastic sections of platform edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.

Fully detailed, injection moulded plastic sections of platform edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.

Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Ratio 308 Flag Stones or other surface material cut to the desired platform shape. (There are 2 pairs of ramp sides per packet).

Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Ratio 308 Flag Stones or other surface material cut to the desired platform shape. (There are 2 pairs of ramp sides per packet).

Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Ratio 308 Flag Stones or other surface material cut to the desired platform shape. (There are 2 pairs of ramp sides per packet).

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

Kit for 2 Platform Ramps to match Ratio Straight Platform Sections kit (Ref 209). Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 120mm x 40mm each.

Designed for use with the SS61 Stone paved platform sections. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 264mm x 76mm

Pack contains 12 pre-coloured Platform Seats

Pack of 12 seats, see Modelscene 5056 Seated Passengers Set.

Pack of 12 seats, see Modelscene 5056 Seated Passengers Set.

Designed for use with the SS62 Stone Paved Platform Ramps, SS78 Island Platform building, and SS54 Canopy. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint:264mm x 76mm.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

3 different machines commonly seen at stations; for Platform Tickets, plus a Weighing Machine, and Metal Name Punch.

The ubiquitous platform trolley.

Pack contains two 144mm long platform units that simply clip to the ST-90 Complete Brick Type Platform system to make a longer platform. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of three widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the Setrack curve. See our Useful Guides Section for publications that will give you tips, instruction and inspiration on building a great model railway.

Pack contains two 144mm long platform units that simply clip to the ST-91 Stone Type Complete Platform system to make a longer platform.As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of three widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the Setrack curve. See our Useful Guides Section for publications that will give you tips, instruction and inspiration on building a great model railway.

Stone edged platform with brick support will make up various combinations of platform; glue and paints required to complete model. See also Modelscene Station Staff 5059, Passengers Standing Sets A and B 5057 and 5058. Footprint: 480mm x 92mm

Kit contains parts to make a 240mm long and 40mm wide platform; easily extended by using further kits. Use Ratio Platform Ramps kit 210 with these platforms. Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Based on a design of call box introduced from the 1920s, in real life they contained a phone for use by the public in an emergency, and police officers could use them as miniature police stations, with facilities inside for compiling reports, taking lunch breaks and even temporarily holding suspects until assistance arrived!

This is a nice and simple kit to assemble, moulded in appropriately-coloured dark blue, and supplied with waterslide decals to complete the details.

Pack contains 5 fully painted figures to look busy around your station.