Often seen in the loco yard or near the platform end. Use LK-2 Water Cranes if additional cranes are required.

A raised water supply for an engine shed or to supply platform water cranes (See Ratio 413 and Peco LK-2 Water Cranes, also Ratio 550 Water Troughs). Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 66mm x 55mm.

Water towers with cranes were generally used on platforms and in other areas with restricted space. This kit will build either a tower with a flat top or the familiar GWR conical type. Includes stove, water crane etc. as well as etched brass chain and ladder; glue and paints required to complete model. Use the Ratio Water Crane and Fire Devil Kit 413 if further cranes are required.

A essential feature on steam era main lines for over 100 years; this kit contains parts to make 370mm of troughs and includes relevant signboards. Use in conjunction with the Large Water Tower (Ref 256). Glue and paints are required to complete this model.

A essential feature on steam era main lines for over 100 years; this kit contains parts to make 760mm of troughs and includes relevant signboards. Use in conjunction with the large Water Tower (Ref 551). Glue and paints are required to complete this model.

Enables you to make a building into a water mill. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Pack includes 10 pieces

This building provides a ticket office, waiting room and parcels facilities. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 116mm x 60mm

Many goods yards had weigh bridges so that the 'carriage price' of a load to be carried by rail could be costed. Goods were then loaded into the goods shed. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint; Weighing Deck 85mm x 50mm, hut 45mm x 35mm.

Commercial vehicles arriving with goods to transport by rail were weighed to work out their levy. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 82mm x 81mm

Many goods yards had weigh bridges so that the 'carriage price' of a load to be carried by rail could be costed. Goods were then loaded into the goods shed. Kit includes guttering, brass etched scales and weighing plate, barge boards, window and door; glue and paints required to complete this model. Footprint: 30mm x 15mm.

Pack of 4, 2 different types.

A simple kit to make this attractive half-cab Maudsley bus. Kit contains pre-coloured parts and transfers. Requires glue and detail painting to complete.

The NEW West Highland Line Platform Mounted Signal Box Laser-Cut Kit

The NEW West Highland laser-cut wood kits, all based on buildings on the existing West Highland Line extension between Fort William and Mallaig in Scotland. In fact Arisaig station was the inspiration for these attractive models, a delightful station on a very scenic and popular route, famous for many reasons but likely to be moist memorable for its role in the Harry Potter films. It is a route that has become a firm favourite with modellers so these kits will certainly be welcomed by many and be the inspiration for a number of new layout builds for sure.

FOOTPRINT (INC. ROOF OVERHANG) 65 X 65mm

The NEW West Highland Line Platform Shelter Laser-Cut Kit

The NEW West Highland laser-cut wood kits, all based on buildings on the existing West Highland Line extension between Fort William and Mallaig in Scotland. In fact Arisaig station was the inspiration for these attractive models, a delightful station on a very scenic and popular route, famous for many reasons but likely to be moist memorable for its role in the Harry Potter films. It is a route that has become a firm favourite with modellers so these kits will certainly be welcomed by many and be the inspiration for a number of new layout builds for sure.

Built by the North British Railway, the West Highland Line travelled through a stunning part of the country and soon became popular with tourists as well as providing an essential link to the outside world from the sparsely populated Highland areas. The station buildings are particularly attractive and our kit of the station at Arisaig personifies that appealing design.

The NEW Rannoch Station Wooden Laser-Cut Kit

The style of Rannoch Station building, built in 1894, is typical of the type of structure found on the North British-built line from Glasgow to Fort William. Sitting on an island platform this is a long building, so consequently the model created from this kit is certainly impressive! By contrast the platform-mounted signal box is quite diminutive when compared with the station, but both structures possess the stylish "Swiss Cottage" style of construction and consequently are very attractive.

Despite its size we have designed the station kit to be as easy to construct as possible, with carefully designed parts that fit snuggly together and the assembly instructions are clear and informative. It would not surprise us if the signal box kit is adapted for other uses, such as a shelter, tea room, waiting room or greenhouse: it has many possibilities! The kits feature some incredible detail and texture, something that we have been working really hard to achieve - so much better than the basic appearance of so many other laser cut kits available on the market.

FOOTPRINT (INC. CANOPY OVERHANG) 460mm x 114mm

The NEW West Highland Line Signal Box Laser-Cut Kit

The NEW West Highland laser-cut wood kits, all based on buildings on the existing West Highland Line extension between Fort William and Mallaig in Scotland. In fact Arisaig station was the inspiration for these attractive models, a delightful station on a very scenic and popular route, famous for many reasons but likely to be moist memorable for its role in the Harry Potter films. It is a route that has become a firm favourite with modellers so these kits will certainly be welcomed by many and be the inspiration for a number of new layout builds for sure.

The NEW West Highland Line Station Building Laser-Cut Kit

The NEW West Highland laser-cut wood kits, all based on buildings on the existing West Highland Line extension between Fort William and Mallaig in Scotland. In fact Arisaig station was the inspiration for these attractive models, a delightful station on a very scenic and popular route, famous for many reasons but likely to be moist memorable for its role in the Harry Potter films. It is a route that has become a firm favourite with modellers so these kits will certainly be welcomed by many and be the inspiration for a number of new layout builds for sure.

Scratch and Kit builders accessory pack. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit includes:
‚Ģ 3 assorted domestic doors plus optional assorted door surrounds
‚Ģ 12 assorted domestic window frames plus optional assorted window surrounds

Useful detail components for scratchbuilders.

Scratch and kit builders accessory pack. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit includes:
‚Ģ 5 assorted doors
‚Ģ Pentice roof and supports (to go over a door)
‚Ģ 2 Domestic gatess
‚Ģ 15 assorted domestic windows
‚Ģ 7 assorted decorative window lintels

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

Storage area with coal sacks some already filled. Approx 57mm long, 18mm wide and 14mm high. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Commonly seen on freight areas, but will also fit into open wagons or on the back of a lorry. Approx 18mm long, 12mm wide and 12mm high. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Looks just right placed between FL 111 and FL 120.
Size approx (mm) L58 x W28 x H22. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains:
‚Ģ 8 x 75mm lengths of fencing
‚Ģ 16 Mounting Posts

A stack of boxes containing the catch of the day! These traditional wooden boxes are filled with a variety of fish.
Size (mm) 41 x 21 x 15 The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the quayside on your layout.

2 huts for shelter and tool storage or with many other uses; platelayers huts, tool stores, lamp huts etc. - even garden/allotment sheds or temporary site huts. Glue and paints required to complete model. Footprint: 42mm x 32mm each

For lakes, rivers, harbours and sometimes seen stored in house driveways.
Size each (mm) 41 x 14 x 4 The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the quayside on your layout.

A 45mm long replication of a wooden staircase, such as would be used to provide access to a signal box or other raised office/factory areas. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

A accurately laser cut wood kit supplemented by injection moulded roof, windows and doors. Glue and paints required to complete model.

This workshop is of a timber construction with felt roof, rainwater gutter and downpipe to the rear. Some offcuts of timber lie on the ground along the front wall while piled crates and a barrel are stored against the left end wall. Although labelled as a joiner's shop, this can be changed to whatever is required, for example a station name would turn this into a backwater branch line waiting room. It could be seen in a commercial environment as an office or stores. Size (mm) L 110; W 40; H40. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

This load can be used on a flatbed trailer.
Size approx (mm) L60 x W30 x H15.The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Approx 35mm long, 16mm wide and 26mm high. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Equally suitable for standard 0 gauge or 0-16.5, these beautifully cast unpainted White Metal figures will bring life and human interest to your layout.

This basic crane is an essential for all station yards, often found inside goods sheds or on loading banks. Used to lift loads up to 1 ton, the boom can be swung round on its base to transfer goods from road to rail vehicles. Supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Base Diameter: 25mm

Used for loading goods onto wagons, these cranes were to be found by bay platforms in small stations with no goods sheds or in the yard of larger stations. The kit includes fine chain for the operating drive wheels and cord for the jib. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model.

Kit of a useful general purpose type crane, also often seen at canal basins etc.

Kit of a useful general purpose type crane, also often seen at canal basins etc.

Pack of 6 easy to assemble yard lamp kits; simple painting is required

Often, the yard foreman would have an office near the yard gate, for completing paperwork and answering the telephone (don't forget the telegraph poles [Ref 452]!). Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint: 46mm x 30mm.

A very useful small building in the traditional industrial/railway architectural style.
Size (mm) 67 x 35 x 56. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Approx size 53mm x 18mm. A small craft used for fishing or leisure, ideal for a quay, lake or river scene or as a trailer load for a road vehicle. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the quayside on your layout.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.