Kit for 2 Platform Ramps to match Ratio Straight Platform Sections kit (Ref 209). Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 120mm x 40mm each.

Kit contains parts to make a 240mm long and 40mm wide platform; easily extended by using further kits. Use Ratio Platform Ramps kit 210 with these platforms. Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

A Gantry to support signals, such as the semaphore signals in our kits Ref 260, 262 and 270. It can also be used to mount colour light signals, and route and platform indicators. Glue and paints required to complete model.

This versatile building would contain a boiler to provide steam either for a pump raising water or to generate electricity for a small factory. Sometimes a short siding was provided alongside for coal deliveries. Kit includes the main building, brick chimney, water tank and outbuilding. Supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Footprint 95mm x 65mm

Kit contains parts to make 12 Relay Boxes. Use with Concrete Trunking (Ref 258); supplied with pre-coloured parts although painting and/or weathering can add realism. Glue is required to complete this model.

Often seen supporting railway cuttings and embankments in urban areas where there is insufficient space for earth slopes. Make cuttings, yard walls or raised railway viaducts with these versatile sections. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Length 348mm, Height 35mm

The Wills scenic series provides a range of simple to make kits that help to change your layout into a model railway that contains real life detail. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Height 68mm.

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm

This common type of station water tower can be used either platform or ground mounted and is supplied with stove, drain, hose and etched ladder. The stove was used to stop the water freezing in the crane arm. Can also supply other platform mounted water cranes (Ratio Water Crane and Fire Devil Ref 212). Glue and paints required to complete model. Tank diameter:22mm.

Adds the finishing touches to any signal box (See Ratio 236 and Peco NB-3 kits); it contains all you need to fit out a typical signal box including a 20-lever frame and a level crossing operating wheel. This kit also includes etched window frames, glazing, barge boards, guttering and downpipes. Glue and paints required to complete model.

Pack contains 3 x 63mm lengths of etched brass laddering and includes safety cages and fixings.

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm

This common type of water tower is usually found tucked away and used to supply individual water cranes (2 included with kit - Ratio Water Crane kit 212 is available if more are required). The water flow was controlled from the hand wheels on the cranes. Supplied with pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Footprint 34mm x 29mm

A model of the station at Castle Cary, Somerset. Although of typically GWR design, it can be adapted to suit that of other railway companies. The kit includes notice boards, telephone and first aid boxes. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 110mm x 32mm.

With this kit you can add a 2nd canopy to Station Building kit (Ref 204) for use on an island platform, or alternatively as an awning on the 'taxi side' of the station building. Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

These simple kit lamps can represent oil, gas or electric lamps. Supplied in a pack 4; supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model.

The 2 Trestles as supplied in kit 241 are available separately, ideal for use with Peco NB-38 and 39 Girder Bridge sides or for those who enjoy scratchbuilding and kit bashing. Footprint: 61mm x 12mm, 125mm Height

This kit gives you the opportunity to make an interesting bridge for your layout. The design is fairly universal across the world, often found spanning tracks in urban areas or bridging rivers in the country. This style of truss girder bridge is also very common in mountainous regions. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Size: Span 144mm. Trestle: 61mm x 12mm, 125mm Height

This kit is designed to extend the Steel Truss Bridge with Stone Piers (Ref 240). Supplied with decking and truss girder sides together with a single trestle. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Size: Span 144mm. Trestle: 61mm x 12mm, 125mm Height

This kit represents a typical Goods Shed, essential to most railway stations for the storage and transfer of dry goods to road vehicles for distribution. The Peco range of wagon loads (e.g. NR-203 Timber Loads) for 10 and 15 ft. wagons provide realistic deliveries. Supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Footprint 90mm x 70mm

Additional piers for the 251 Viaduct kit, can also be used as supports for the NB-38 and 39 Girder Bridge Sides. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Height 88mm, width 63mm each

10 Telegraph poles, these also carried railway bell codes and phone connections between signal boxes and stations as well as GPO lines. Height approx 50mm

Can be extended by adding additional kits and the 254 Piers, or with the 252 Extra Arch and Pier. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 220mm x 63mm, 130mm High.

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm

Stations often had these Water Cranes at the end of the platforms so the locomotives could be refilled without detaching them from the train. Also included is a coke brazier, called a 'fire devil' to keep the cast iron pipe from freezing up during the winter. These cranes were usually supplied by a large water tank (see Ratio Water Tower kits 215, 256 and Loco Servicing Depot kit 206). Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

A essential feature on steam era main lines for over 100 years; this kit contains parts to make 370mm of troughs and includes relevant signboards. Use in conjunction with the Large Water Tower (Ref 256). Glue and paints are required to complete this model.

Many goods yards had weigh bridges so that the 'carriage price' of a load to be carried by rail could be costed. Goods were then loaded into the goods shed. Kit includes guttering, brass etched scales and weighing plate, barge boards, window and door; glue and paints required to complete this model. Footprint: 30mm x 15mm.

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm

This basic crane is an essential for all station yards, often found inside goods sheds or on loading banks. Used to lift loads up to 1 ton, the boom can be swung round on its base to transfer goods from road to rail vehicles. Supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Base Diameter: 25mm