A front garden to rival the best in suburbia or Bungalowland. An oval lawn, accessed by a couple of paving slabs is surrounded by colourful edging plants. A low hedge runs along the right side and an ornate stone wall protects the front.
Size approx (mm) L70 x W52 x H15
This garden can be used on its own or placed with CG246 with a path in between. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

A front garden to rival the best in suburbia or Bungalowland. An oval lawn, accessed by a couple of paving slabs is surrounded by colourful edging plants. A low hedge runs along the left side and an ornate stone wall protects the front.
Size approx (mm) L70 x W52 x H15
This garden can be used on its own or placed with CG247 with a path in between. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Approximate size: 29mm x 14mm x 11mm.
A little stall draped with imitation grass and topped with four open wooden boxes displaying farm fresh cauliflower, carrots, potatoes and apples. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Stall with Bananas, Cucumbers, Melons and Peppers
Similar to SS365 and an ideal companion, but with a different selection of fruit and vegetables on display.
Size: 28mm x 14mm x 13mm high. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

Approximate sizes: Island 75mm long x 15mm wide x 3mm thick, to hold the Air Pump (18mm x 10mm x 27mm), Oil Cabinet (16mm x 7mm x 19mm) and Tyre Rack (15mm x 8mm x 12mm).
The 'Free Air' pump has a clock face dial and coiled air line on the ground beside it, the oil cabinet has a semi-curved roof (Castrol type) and the rack holds four tyres, three standard and one large. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Approximate size: 85mm long x 67mm deep x 50mm high.
This building, based on a standard design, has brown brick walls with a curved corrugated iron roof. Details include a pair of large wooden doors (one with access door inset), two long windows on one side wall and a single back door and office window at the rear. Although 'Garage and Workshop' is displayed on the nameboard above the front doors, with this sticker removed the building would look right on a farm, airfield, barracks or commercial premises, placed singly or in multiple. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

This is another of the little things that can help to add the 'feel good factor' to a part of your layout. An arbour with slate roof, wooden seat and roses growing up either side, it's perfect for that secluded, sunny spot. It also makes the ideal bus shelter for a country setting.
Size approx (mm) L30 x W15 x H35. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

This kit comprises mostly of plastic injection moulded parts, plus a laser cut wooden sprue containing the lawnmower and roller. The kit contains: Greenhouse, Conservatory, Garden Shed, Garden Seat, Cold Frames, Water Butt, Wheelbarrow, Lawnmower, Lawn Roller, and 330mm of Larch-Lap Fencing with gate.

2 Garden sheds, each 57mm x 28mm. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Pack contains simple kit to make 6 Gas Lamps (non- working)

This medium sized brick built office with its pitched slate roof and traditional architecture has all the charm of a steam era railway building. It is ideally suited for a goods yard or station complex. Could also be used with a weighbridge or as a canal side office.
Size (mm) 70 x 43 x 67. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Can be used with Ratio 254 Stone Piers to create an impressive viaduct as seen on many railways around the world. Detailed plastic moulding supplied 2 in a pack.

Can be used with Ratio 254 Stone Piers to create an impressive viaduct as seen on many railways around the world. Detailed plastic moulding supplied 2 in a pack.

Pack contains 12 Girders to use as a load or as detail for your goods yard.

A pre coloured plastic kit including a selection of accessories and full instructions.

The Craftsman series from Wills offers the more experienced modeller a cost effective way to make large, highly individual models. They cover a range of typically British buildings both railway and domestic; each kit includes plastic moulded materials sheets, detailed parts, illustrated instructions and templates. The use of sheet materials rather than moulded parts for the main components allows the opportunity to easily modify the design to suit your needs. Should you wish to extend the building the same materials sheets are available separately (see the Wills Materials Pack range). Similarly it would be easy to add additional doors and/or windows if required.

The Craftsman series from Wills offers the more experienced modeller a cost effective way to make large, highly individual models. They cover a range of typically British buildings both railway and domestic; each kit includes plastic moulded materials sheets, detailed parts, illustrated instructions and templates. The use of sheet materials rather than moulded parts for the main components allows the opportunity to easily modify the design to suit your needs. Should you wish to extend the building the same materials sheets are available separately (see the Wills Materials Pack range). Similarly it would be easy to add additional doors and/or windows if required.

Plastic kit depicting a structure typical of the kind found in the goods yard of many stations around the country.

A model of a fixed height derrick type jib crane, usually hand worked. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 81mm x 21mm.

Many small stations only had a loading platform for goods traffic, so required a store house for keeping goods safe and dry. The raised floor of this store both kept goods free from frost and was also a convenient height for loading. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 92mm x 60mm

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

The old kirkyard would not be complete without these fine memorials which have weathered over time. Pack of 5. Colours may vary. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Pack of 4. Colours may vary. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Pack of 5. Colours may vary. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Store of steel drums for all transport depots, military establishments, etc.
Size approx (mm) L50 x W20 x H25. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Footprints: Greenhouse 56mm x 41mm, Cold Frames 26mm x 25mm each (glazing included). Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Stacked open coal sacks for use in a coal yard and as a flatbed lorry load for domestic delivery.
Size approx (mm) L52 x W25 x H18. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

A commonly seen load of cement bags for a road or rail vehicle. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

2 huts and a privy as seen on allotments everywhere. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Combined footprint: 94mm x 38mm

Kit of a typical small box, often found on a branch line or controlling a main line yard.

A small signal box as would be seen at a small country station, or controlling the exit from a yard or industrial area. Use SS89 Point Rodding to fill in this important detail on your layout. Footprint:48mm x 36mm.

Makes 4 Ground Signals, glue and paints required to complete model.

The use of old coach bodies as stores, mess huts or even homes was common. Clutter included, huge scope for adding detail to such a scene. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 115mm x 40mm

Usually used for storage around the station or goods yard, they often can be found being used as sheds or on farmland. Clutter included; supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 176mm x 90mm

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. An essential item on any property, this pack of Gutters, Soffits and Downpipes will provide drainage for up to 4 Terraced house fronts.

Pack includes: 432mm of guttering, 465mm of soffits, 4 x 71mm down pipes, 1 angled water pipe and 14 down pipe brackets.

This kit is a model of a typical GWR brick built signal box with a hipped roof, built between 1896 and 1921. In practice there were many small differences between individual signal boxes as they were often tailored to fit the location, a good example is on the South Devon Railway at Buckfastleigh. The Ratio Signal Box Interior kit 553 will provide a wealth of interior detail. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint: Approx 90mm x 48mm

Part of the Ratio 'Quick Assembly' family of signals. These allow you to make home and distant signals quickly and easily. They include signal operating wire and lever. This kit enables you to replicate a GWR Distant Signal. Kit includes pre-coloured signal arm, glue and paints required to complete model.

Part of the Ratio 'Quick Assembly' family of signals. These allow you to make home and distant signals quickly and easily. They include signal operating wire and lever. This kit enables you to replicate a GWR Home and Distant Signal. Kit includes pre-coloured signal arms, glue and paints required to complete model.

Part of the Ratio 'Quick Assembly' family of signals. These allow you to make home and distant signals quickly and easily. They include signal operating wire and lever. This kit enables you to replicate a GWR Home Signal. Kit includes pre-coloured signal arm, glue and paints required to complete model.

Part of the Ratio 'Quick Assembly' family of signals. These allow you to make home and distant signals quickly and easily. They include signal operating wire and lever. This kit enables you to replicate a GWR Junction/Bracket signal, either as a Home, Distant or combined Home and Distant signal. Glue and paints required to complete model.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 36 posts and enough wire to make 720mm of fencing.

A simple kit to make this attractive half-cab Maudsley bus. Kit contains pre-coloured parts and transfers. Requires glue and detail painting to complete.

A simple kit to make this attractive Thorneycroft vehicle. Kit contains pre-coloured parts and transfers. Requires glue and detail painting to complete.

Fencing to go at the back of a platform ramp plus 3 gates

Advanced Construction Signals. Aimed at modellers with more experience, these kits enable you to custom make specific configurations of signals to suit your track layout and train paths. This kit contains 2 posts, 2 Home arms and 1 Distant. It can also be used with the Pratt Truss Gantry kit (Ref 478) to provide over track signals. Glue and paints required to complete model.

Advanced Construction Signals. Aimed at modellers with more experience, these kits enable you to custom make specific configurations of signals to suit your track layout and train paths. This kit enables you to replicate a GWR Junction/Bracket Home signal. Glue and paints required to complete model.