Pack contains 4 pre-coloured Skips

Modelscene scenic accessories are injection moulded, painted and ready to use.

Modelscene scenic accessories are injection moulded, painted and ready to use.

Modelscene scenic accessories are injection moulded, painted and ready to use.

Modelscene scenic accessories are injection moulded, painted and ready to use.

Pack contains 1 unlettered Skip

Supplied in a square-section tube, the three separate sheets will match perfectly together to form a continuous run of 2400mm (95in), and reaching to a height of 333mm (13in). Future backscenes will match at either end allowing longer runs of scenery throughout the full length of a layout.

Pack of 2 which can also be used as cold frames. Approximately 32mm long and 22mm wide each. Glue and paints required to complete model.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

Also used for diving support, pleasure trips and tendering duties. Details include winch, navigation lights and equipment, life belts and separate mast to fit into the hole in the wheelhouse roof. Approx size 120mm x 35mm. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the quayside on your layout.

Inshore small fishing craft seen around the coasts of Britain. Details include winch navigation lights and equipment, life belt and separate mast to fit into hole in deck behind wheelhouse. Approx size 120mm x 35mm. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the quayside on your layout.

Ideal for storing the lawnmower and bicycle.
Size approx (mm) L36 x W26 x H31. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

A potting shed and tool store for gardeners.
Size approx (mm) L38 x W28 x H31. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

This kit includes 2 of these basic but often welcome structures. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 44mm x 26mm each.

A tranquil pool with rocky surround, marginal plants and flowering water lilies to the centre. Ideally suited for a back garden, natural hollow in open country or woodland.
Size approx (mm) L97 x W94 x H16

Our scenic background range captures the variety on the British landscape, from industrial cities and docks to small country towns, fields and mountains. The sheets can be assembled in almost any combination, consistent horizon heights and special extension sheets make it easy to accommodate transitions from town to countryside and back again. The choice of sheet size will obviously depend to some degree on the model scale. Bear in mind that perspective only ever makes things appear smaller not larger, so if you are unsure, remember 1 golden rule. A backscene that appears to be a larger scale than the foreground models will always look wrong.

Our scenic background range captures the variety on the British landscape, from industrial cities and docks to small country towns, fields and mountains. The sheets can be assembled in almost any combination, consistent horizon heights and special extension sheets make it easy to accommodate transitions from town to countryside and back again. The choice of sheet size will obviously depend to some degree on the model scale. Bear in mind that perspective only ever makes things appear smaller not larger, so if you are unsure, remember 1 golden rule. A backscene that appears to be a larger scale than the foreground models will always look wrong.

This is a neatly proportioned little red brick building with a charm of its own. With each wall having an individual feature, namely a door, window, chimney and rainwater downpipe, it looks interesting when viewed from any angle. The roof is topped off with grey slates and lead flashing. Size approx (mm) 40 x 45 x 55. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

A versatile small barn/stores kit which can be assembled as a derelict or pristine building with a choice of wall finishes.

The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. The Static Grass Applicators PSG-1 and 2 electrostatically charge the grass filaments so that they stand vertically, regardless of the terrain. Mixing various lengths and colours of grasses can produce highly realistic textures and effects. Our Shows You How Booklet No 13 Detailing the Landscape and Youtube video clips show the effects that can be created.

For weathering wagons or the yards they frequent, or for those wanting to give a seasonal feel to their layout.

Size approx (mm) L80 x W42. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Classic style fencing modelled on a GWR design, but still seen also in many other places, around parks, public buildings, monuments etc. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 700mm of fencing.

Classic style fencing modelled on a GWR design, but still seen also in many other places, around parks, public buildings, monuments etc. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains:
‚Ģ 2 x 100mm lengths of ramp fencing
‚Ģ 8 assorted gates

Pack contains 4 each of 25, 30, 50, 60, 80 and 100 mph plus optional directional arrows. Simple painting may be required.

10 6mm high self adhesive Spring Grass tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.

A standard design of waste bins.
Size (mm) 10 x 10 x 15. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Based on the original decorative tubs which adorn the picturesque Devonian village of Beer, these will add a splash of colour to any location.
Size (mm) 15 x 14 x 14. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

This common type of water tower is usually found tucked away and used to supply individual water cranes (2 included with kit - Ratio Water Crane kit 212 is available if more are required). The water flow was controlled from the hand wheels on the cranes. Supplied with pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Footprint 34mm x 29mm

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Our model faithfully captures the mitred edges of the prototype; this pack contains 600mm of fencing.

Kit includes:
‚Ģ 2 x 120mm ramps (1 L/H, 1 R/H)
‚Ģ 2 large gates and 2 small gates

After loading, open wagons were checked for height using this simple gauge to ensure that loads did not hit bridges etc. and therefore were usually placed near the yard exit. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Part of the Ratio 'Quick Assembly' family of signals. These allow you to make home and distant signals quickly and easily. They include signal operating wire and lever. This kit enables you to replicate a Southern Railway rail built signal, either as a Home, Distant or combined Home and Distant signal. Glue and paints required to complete model.

Kit for 4 seats, a post war steel and timber design which originated on the Southern Railway.

Ideally suited for building sites, etc but can be used as wagon loads.
Size approx (mm) L54 x W28 x H23. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Fully painted figures to add to your station or street scenes.

Fully painted figures to add to your station.

Pack contains 5 standing people for all OO scenes. Each pack contains 5 different characters all hand painted.

The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. The Static Grass Applicators PSG-1 and 2 electrostatically charge the grass filaments so that they stand vertically, regardless of the terrain. Mixing various lengths and colours of grasses can produce highly realistic textures and effects. Our Shows You How Booklet No 13 Detailing the Landscape and Youtube video clips show the effects that can be created.

Placed at the foot of platform end ramps, barrow crossings allow light goods and luggage to be transferred across a double track to an adjoining platform by railway staff. Glue and paints required to complete model.

A model of the station at Castle Cary, Somerset. Although of typically GWR design, it can be adapted to suit that of other railway companies. The kit includes notice boards, telephone and first aid boxes. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 110mm x 32mm.

A model of the station at Castle Cary, Somerset. Although of typically GWR design, it can be adapted to suit that of other railway companies. The kit includes notice boards, telephone and first aid boxes. See also Modelscene Station Staff 5059, Passengers Standing Sets A and B 5057 and 5058 and Passengers Seated Ref. 5056. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 210mm x 135mm (inc. canopy)

With this kit you can add a 2nd canopy to Station Building kit (Ref 204) for use on an island platform, or alternatively as an awning on the 'taxi side' of the station building. Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

The pre coloured parts of this plastic kit can be assembled in a number of ways ; further kits can be combined to make a larger structure if required.

This 180mm long and 60mm wide Canopy is designed for use with the SS61 Platform sections and SS78 Island Platform building, but can be used with any suitable platform system. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Here is the clock, the town clock, telling the time for....
No town (or large station) is complete without an imposing clock tower! With its honey coloured dressed stone tower and four clock faces, this is an elegant model.
Size: 91mm high x 33mm square. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.