6 assorted cases

This distinctive prefabricated corrugated iron building was used by the GWR as a passenger platform shelter and a storage hut. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 62mm x 39mm.

The popular wooden rowing boat (QS415) has been given a makeover - red hull, white top and wood brown interior. Size (mm) 41 x 14 x 4 The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the quayside on your layout.

The freshest beer, just delivered from the brewery for the local pub!
Size approx (mm) L19 x W14 x H19. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Three kegs removed from the pallet expose a rubber separator tray.
Size approx (mm) L19 x W14 x H19. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Full load of kegs, from brewery to customer.
Size approx (mm) L19 x W14 x H28. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Partly unloaded delivery with two kegs removed.
Size approx (mm) L19 x W14 x H28. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Pack contains 18 assorted Pallets to use as a load or as detail for your goods yard.

42 sacks, 10 pallets and 24 barrels. Glue and paints required to complete model.

30 sacks, 6 pallets and 4 barrels; useful for detailing around the Goods Shed (Ratio 534), Coal/Timber Merchants (Ratio 525), Provendor Store (Ratio 513) or station yard. Glue and paints required to complete model.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

Scratch and Kit builders accessory pack.This kit includes sufficient parts to construct parapet bridge walls for a single track overbridge 131mm Long including capping stones and end piers. Easily extended using additional kits. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Pack contains 6 Parcels to use as a load or as detail for your goods yard or station.

Size approx (mm) L66 x W29 x H20. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Size approx (mm) 65 x 30 x H25. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

These could be placed beside a track works area or in a builders merchant's yard.
Size approx (mm) L48 x W32 x H12. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Equally suitable for standard 0 gauge or 0-16.5, these beautifully cast unpainted White Metal figures will bring life and human interest to your layout.

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm

For newcomers to modelling who are interested in making a diorama but do not know exactly where to start, this is a lovely introductory set to allow you to model something yourself and create your own small-scale model.  It contains all the necessary materials for creating the diorama layout, and also an illustrated story book that children can enjoy reading at bedtime.

These little diorama kits also allow more experienced modellers to try building their own unique scene, and can be joined together to make a working and functional group of mini dioramas that can be used to make a working circuit. This can be great for modelling clubs, associations or schools, and can bring modellers together in group projects - to help focus on the dexterous skills and create something all by themselves.

As well as a a beautifully illustrated book, these kits include all the materials and scenery required, as well as a set of FREE stickers!

• Time required to complete: about 2 ~ 3 hours (excluding drying time)
• Suggested age: 8 yrs+ (Supervision recommended)
  

For newcomers to modelling who are interested in making a diorama but do not know exactly where to start, this is a lovely introductory set to allow you to model something yourself and create your own small-scale model.  It contains all the necessary materials for creating the diorama layout, and also an illustrated story book that children can enjoy reading at bedtime.

These little diorama kits also allow more experienced modellers to try building their own unique scene, and can be joined together to make a working and functional group of mini dioramas that can be used to make a working circuit. This can be great for modelling clubs, associations or schools, and can bring modellers together in group projects - to help focus on the dexterous skills and create something all by themselves.

As well as a a beautifully illustrated book, these kits include all the materials and scenery required, as well as a set of FREE stickers!

• Time required to complete: about 2 ~ 3 hours (excluding drying time)
• Suggested age: 8 yrs+ (Supervision recommended)
  

Incorporate these units into public areas to improve the environment ...but they can also be used on station platforms and in town squares.
Size (mm) 55 x 17 x 16. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit contains:
‚Ģ 8 79mm long straight pavement sections
‚Ģ 2 corner units

Perfect for the miniature pigeon fancier on your layout! Place one at the bottom of his garden or on that spare piece of railway ground.
Size each approx (mm) L45 x W30 x H30. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Pack contains 14 pre-coloured Pigs

Pack contains 7 pigs and a pre-coloured Trough.

A load of loose bricks as tipped from the back of a lorry.
Size (mm) 45 x 38 x 13. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Place them in track maintenance areas.
Size approx (mm) L34 x W37 x H12. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Place them in track maintenance areas.
Size approx (mm) L34 x W37 x H12. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Commonly seen on freight platforms, but will also fit into open wagons.
Size approx (mm) L60 x W22 x H20. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

This model can be used to add interest to a rural scene; also useful for wargamers. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 57mm x 49mm

Already highly acclaimed by N and 2mm scale modellers, these barrels have proved to be an instant hit! Approx 32mm long, 14mm wide and 10mm high. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Supplied in a square-section tube, the three separate sheets will match perfectly together to form a continuous run of 2400mm (95in), and reaching to a height of 333mm (13in). Future backscenes will match at either end allowing longer runs of scenery throughout the full length of a layout.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

These large modern fish boxes are referred to as 'kits' by fishermen. (Also available as part of QS426)
Size approx (mm) L12 x W8 x H10. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Can be used with Wills SS83 Stone Piers to create an impressive viaduct as seen on many railways around the world. Detailed plastic moulding supplied 2 in a pack.

A ubiquitous structure found on every railway.

The platelayers who maintained the track used huts like these for storing tools, shelter - and, of course, for somewhere to make a brew! Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 58mm x 44mm.

A selection of traditional track maintenance tools, which could be put with the OP-11 Workmen figures.

This kit includes 2 each of: Running in boards, chocolate machines, trolleys, sack trucks plus a selection of station signs. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

This new kit brings the range of platform accessories into contemporary times. A ticket kiosk, information and timetable boards, a ticket machine, ticket barriers, and CRT screens are all represented in this comprehensive kit. Moulded in red plastic, the models are easy to assemble, and painting would be necessary to bring out the detail. Suitable for all regions in the UK, the models nevertheless recall memories of "Network South East" of the 1980s!

Pack contains simple kits to make 1 large Station Clock, 1 Litter Bin, 3 Fire Buckets and Rack, 4 Tannoy Speakers. Painting is required for realism.

A useful cover for passengers awaiting their train. Several kits can be combined to protect a long platform, they can also be used side by side. Glue and paints required to complete model. Footprint: 270mm x 52mm

The obvious use for this model is on the outlying lengths of station platforms, but it could also be employed on station approaches and as a mini roundabout in the vehicle turning area.
Size: 27mm dia. x 24mm high.. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Fully detailed, injection moulded plastic sections of platform edging; these units can be curved if desired. Use with Ratio 308 Flag Stones or other surface material cut to the desired platform shape. (There are 5 lengths of edging per pack).

Fully detailed, injection moulded plastic sections of platform edging; these units can be curved if desired. Use with Ratio 308 Flag Stones or other surface material cut to the desired platform shape. (There are 5 lengths of edging per pack).

Fully detailed, injection moulded plastic sections of platform edging; these units can be curved if desired. Use with Ratio 308 Flag Stones or other surface material cut to the desired platform shape. (There are 5 lengths of edging per pack).

Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.

Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.