Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains:
‚Ģ 340mm of Straight Fencing
‚Ģ 2 x 102mm lengths of Ramp Fencing
‚Ģ 1 Large and 1 Small Gate
‚Ģ 2 Ramp Gates
‚Ģ 1 Ticket Gate

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 680mm of fencing.

Kit for 4 classics GWR steel and timber seats with the GWR 'shirtbutton' logo.

This superb kit is modelled on the overall roof at Ashburton, Devon. Designed for use with Station Building kit (Ref 204), it will enable you to build a GWR station quickly and easily. Although a specific prototype, the design is typical of many other regions including some tropical countries where it was intended to shelter passengers from the sun as well as rain. Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 153mm x 82mm

Fencing to go at the back of a platform plus 3 gates; also seen in public parks, Georgian terraces and many other places.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains Approximately 476mm of fencing.

Standard GWR Signal Box, numbered 8/28b by the Signalling Record Society, installed from the 1920's up until WW2. Our kit includes interior details such as levers, stove , desk and brass etched window frames. Supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Footprint 60mm x 25mm

Monkton Combe, once an intermediate station on the long-closed Camerton branch near Bath, was thrust into the limelight in 1952 when it was chosen to be the location for the filming of the famous Ealing Comedy "The TitfieldThunderbolt". 

After loading, open wagons were checked for height using this simple gauge to ensure that loads did not hit bridges etc. and therefore were usually placed near the yard exit. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

A simple kit to make this attractive Throneycroft vehicle. Kit contains pre-coloured parts and transfers. Requires glue and detail painting to complete.

Keep on the right side of health and safety regulations - use these double rail stanchions in locations wherever the general public are allowed. Pack contains 20 injection moulded supports and approx 2 x 400mm length of nickel silver railing.

Always difficult to scratchbuild, these realistic features will enhance any industrial installation that needs a single rail safety barrier. Pack contains 20 injection moulded supports and 400mm length of brass wire.

• TUFTS – 100 x Heather Self-Adhesive Static Grass Tufts by War World Scenics
• SELF-ADHESIVE – Easy to use, just peel & stick where required
• COLOURS – Available in more than 30 different colours and styles
• LENGTHS – Available in 4mm, 6mm and 10mm lengths
• IDEAL – For representing bushes and wild or long grass on model railway layouts, miniature bases, wargame battleboards and model dioramas

• TUFTS – 100 x Heather Self-Adhesive Static Grass Tufts by War World Scenics
• SELF-ADHESIVE – Easy to use, just peel & stick where required
• COLOURS – Available in more than 30 different colours and styles
• LENGTHS – Available in 4mm, 6mm and 10mm lengths
• IDEAL – For representing bushes and wild or long grass on model railway layouts, miniature bases, wargame battleboards and model dioramas

Pack contains 8 pieces

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

Enables you to change the SSM300 into a Distribution Depot. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

A accurately laser cut wood kit supplemented by injection moulded roof. Glue and paints required to complete model.

Pack contains 5 fully painted hiking figures.

Kit includes 2 large hoardings plus 3 smaller ones, Bill Stickers himself plus ladder and paste bucket, plus a sheet of 40 posters. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 58mm x 32mm each.

Pack contains 2 Hoardings plus a selection of signs

Pack contains 2 Hoardings plus a selection of signs

Used for light lifting work in goods depots and other yards. Also to be found inside goods sheds for unloading wagons. Chain included; kit requires glue and paints to complete.

This kit contains the parts to make 1 Lower Quadrant Home or Distant Signal. Glue and paints required to complete model.

This kit contains the parts to make 1 Upper Quadrant Home or Distant Signal. Glue and paints required to complete model.

Pack contains 6 pre-coloured Horses

Pack contains 4 painted animals.

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. Kit includes parts to make: 1 Industrial chimney approx 120mm High, 20mm x 20mm at base, and 1 Tank 24mm Long x 14mm Wide and approx 34mm High.

Kit and scratch builders accessory, 100mm high chimney with cowl, hand wheels and chimney support wires.

Scratch and Kit builders accessory pack. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit includes:
‚Ģ 8 Semi - Circular brick arches - Internal Diameter 30mm, External Diameter 37mm
‚Ģ 8 Semi - Circular brick arches - Internal Diameter 7mm, External Diameter 11mm
‚Ģ 2 Circular brick window surrounds - Internal Diameter 8mm, External Diameter 13mm
‚Ģ 2 Window/Door Arches - Length 48mm

Etched brass Industrial style windows. This pack contains:
‚Ģ 8 11mm x 6mm Round Top Window Frames
‚Ģ 6 10mm x 6mm Round Top Window Frames
‚Ģ 4 6mm x 9mm Rectangular Windows Frames
‚Ģ 2 15mm x 12mm Skylight Frames
‚Ģ 2 3mm Diameter Porthole Window Frames
‚Ģ 4 Small half Round Window Frames

8 Round arch-topped 19th Century style window frame mouldings 20mm High x 11mm Wide.

A truly versatile kit that can be made up in many different formats. The door/window and shutter positions can be swapped around, or left as blank wall. It is easy, for example, to place them in the unit ends, where the shutters could allow trains to enter to make the unit into an EMU/DMU/Diesel Depot. This kit can be made up in full or half relief, and an extension kit (SSM315) is available to make it wider. Multiple kits can easily be joined together to make a building that is limited only by your imagination. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 168mm x 168mm (Stand Alone Format) or 336mm x 84mm (Half Relief Format)

This kit enables you to double the width of the SSM300 Multi Purpose Modern Building.Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Modular design, makes it easy to assemble pits of any required length. A great addition to the LK-80 Modern Train Shed unit or create a modern diesel/EMU servicing shed using the Wills SSM300 Modern Industrial Building and SSM315 Extension kits.

Modular design, makes it easy to assemble pits of any required length. Supplied with Code 55 rail, easy to use with Code 80 rail if required. A great addition to the NB-80 Modern Train Shed unit.

Modular design, makes it easy to assemble pits of any required length. A great addition to the LK-80 Modern Train Shed unit or create a modern diesel/EMU servicing shed using the Wills SSM300 Modern Industrial Building and SSM315 Extension kits.

This kit contains the parts to make 1 Lower Quadrant Home or Distant Junction/Bracket Signal. Glue and paints required to complete model.

Pack contains 2 Kissing Gates

These useful accessories add strength to models by increasing the joint surface area when cementing walls etc. together. (Pack of 48)

Used to store oil for the signal lamps away from the signal box. Kit includes 2 huts and 4 barrels. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 44mm x 37mm each.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit includes:
‚Ģ 20 26mm wide Fence Panels including post
‚Ģ 4 12mm wide Gates including post plus 8 additional posts.

If you have a large goods yard on your layout, this would make a good mess coach for the staff. It could also be used as a dwelling or provide sleeping accomodation on a campsite. Includes clutter; glue and paints required to complete model. Footprint: 195mm x 45mm

This 20,000 gallon design is equally at home replenishing water troughs (Ratio Water Troughs kit Ref 255), a large motive power depot or supplying several platform mounted water cranes (Ratio Water Crane and Fire Devil Ref 212). Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 72mm x 30mm

This 20,000 gallon design is equally at home replenishing water troughs, a large motive power depot or supplying several platform mounted water cranes (See Ratio Water Crane and Fire Devil kit 413 and Peco LK-2 Water Cranes). Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 122mm x 49mm

Modern type crossing barriers complete with dummy light standards. Can be used with the Peco Setrack Level Crossings ST-261/263/266/267 and 268

Modern type crossing barriers complete with dummy light standards. Can be used with the Peco N Setrack Level Crossings ST-20/21.

Traditional wooden type gates (complete with separate pedestrian access gates), giving double track spacing when closed across railway tracks.