The pre coloured parts of this plastic kit can be assembled in a number of ways ; further kits can be combined to make a larger structure if required.

Placed at the foot of platform end ramps, barrow crossings allow light goods and luggage to be transferred across a double track to an adjoining platform by railway staff. Glue and paints required to complete model.

Kit for 4 seats, a post war steel and timber design which originated on the Southern Railway.

After loading, open wagons were checked for height using this simple gauge to ensure that loads did not hit bridges etc. and therefore were usually placed near the yard exit. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

This kit includes 2 of these basic but often welcome structures. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 44mm x 26mm each.

4 x 143mm lengths of laddering.

Adds the finishing touches to any signal box (See Ratio 500, 503, 536, 552 and Wills SS48 kits); it contains all you need to fit out a typical signal box including a 20-lever frame and a level crossing operating wheel. Glue and paints required to complete model.

This pre coloured plastic kit is modelled on the iconic BR design built at Potters Bar in the 1950's. Full instructions included.

This scrapyard kit includes a stone shack and some ready made scrap.Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 98mm x 46mm

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit includes:
‚Ģ 864mm of Rustic Fencing
‚Ģ 1272mm of Picket Fencing

Scratch and Kit builders accessory pack. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit includes:
‚Ģ 9 35mm high, 21mm wide Round Top Window Frames
‚Ģ 4 134mm long, 77mm high English Bond Brick Sheets (Matches SSMP227) each with 2 semi prepared Round Top Window Apertures
‚Ģ 8 Semi - Circular brick arches - Internal Diameter 20mm, External Diameter 33mm
‚Ģ Clear plastic glazing

Ideal for bringing a road or path over a small river or canal. The Wills scenic series provides a range of simple to make kits that help to change your layout into a model railway that contains real life detail. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Height 68mm.

Often seen supporting railway cuttings and embankments in urban areas where there is insufficient space for earth slopes. Make cuttings, yard walls or raised railway viaducts with these versatile sections. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Length 350mm, Height 45mm

A more modern trackside detail, concrete trunking (SS87) would carry the cabling along the lineside between boxes. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

A more modern trackside detail, concrete trunking (SS87) would carry the cabling along the lineside between boxes. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Gives interest to a kit building - and can hide unsightly corners! Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

A typical building provided by local authorities in parks and public places. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 77mm x 56mm

Trolley plus 5 pieces of luggage.

Stone edged platform with brick support will make up various combinations of platform; glue and paints required to complete model. See also Modelscene Station Staff 5059, Passengers Standing Sets A and B 5057 and 5058. Footprint: 480mm x 92mm

Designed to be placed on a platform or as a ground level box, includes fire buckets and lamp. The Ratio Signal Box Interior kit 553 will provide a wealth of interior detail. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 65mm x 50mm

The ubiquitous platform trolley.

3 different machines commonly seen at stations; for Platform Tickets, plus a Weighing Machine, and Metal Name Punch.

Pack of 12 seats, see Modelscene 5056 Seated Passengers Set.

Pack of 12 seats, see Modelscene 5056 Seated Passengers Set.

Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Ratio 308 Flag Stones or other surface material cut to the desired platform shape. (There are 2 pairs of ramp sides per packet).

Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Ratio 308 Flag Stones or other surface material cut to the desired platform shape. (There are 2 pairs of ramp sides per packet).

Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Ratio 308 Flag Stones or other surface material cut to the desired platform shape. (There are 2 pairs of ramp sides per packet).

Fully detailed, injection moulded plastic sections of platform edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.

Designed for use with the SS61 Stone paved platform sections. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 264mm x 76mm

Fully detailed, injection moulded plastic sections of platform edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.

Fully detailed, injection moulded plastic sections of platform edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.

Designed for use with the SS62 Stone Paved Platform Ramps, SS78 Island Platform building, and SS54 Canopy. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint:264mm x 76mm.

Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.

Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.

Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Wills SSMP221 Victoria Stone Paving or other surface material cut to the desired platform shape.

Fully detailed, injection moulded plastic sections of platform edging; these units can be curved if desired. Use with Ratio 308 Flag Stones or other surface material cut to the desired platform shape. (There are 5 lengths of edging per pack).

Fully detailed, injection moulded plastic sections of platform edging; these units can be curved if desired. Use with Ratio 308 Flag Stones or other surface material cut to the desired platform shape. (There are 5 lengths of edging per pack).

Fully detailed, injection moulded plastic sections of platform edging; these units can be curved if desired. Use with Ratio 308 Flag Stones or other surface material cut to the desired platform shape. (There are 5 lengths of edging per pack).

The obvious use for this model is on the outlying lengths of station platforms, but it could also be employed on station approaches and as a mini roundabout in the vehicle turning area.
Size: 27mm dia. x 24mm high.. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

This kit includes 2 each of: Running in boards, chocolate machines, trolleys, sack trucks plus a selection of station signs. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

A selection of traditional track maintenance tools, which could be put with the OP-11 Workmen figures.

A ubiquitous structure found on every railway.

The platelayers who maintained the track used huts like these for storing tools, shelter - and, of course, for somewhere to make a brew! Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 58mm x 44mm.

Can be used with Wills SS83 Stone Piers to create an impressive viaduct as seen on many railways around the world. Detailed plastic moulding supplied 2 in a pack.

This model can be used to add interest to a rural scene; also useful for wargamers. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 57mm x 49mm

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit contains:
‚Ģ 8 79mm long straight pavement sections
‚Ģ 2 corner units

Equally suitable for standard 0 gauge or 0-16.5, these beautifully cast unpainted White Metal figures will bring life and human interest to your layout.