These turnouts match the ST-700 Standard Straight and the ST-725 Standard Curve so that it is easy to put together your layout. Peco Setrack Bullhead 0 Gauge track makes it possible have somewhere to run trains without having to build or find room for a fixed layout. With Setrack you can lay out your trackwork indoors on the floor or out on the patio in any configuration you choose and pack it away again afterwards. Compatible with and made to the same high standard of detail and realism as the Bullhead Streamline range, it can also be incorporated into a Streamline layout without problems. Made with solid nickel silver rail to the classic bullhead section and check rails are also machined from solid rail. The SL-713 0 Gauge Bullhead to Flat Bottom Transition Track makes it easy to also incorporate the Setrack range into a layout using Flat Bottom track.

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC