This versatile building would contain a boiler to provide steam either for a pump raising water or to generate electricity for a small factory. Sometimes a short siding was provided alongside for coal deliveries. Kit includes the main building, brick chimney, water tank and outbuilding. Supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Footprint 95mm x 65mm

This type of canopy is to be found across the country at many stations with island and bay platforms. It will match in well with the canopy on Station Building kit (Ref 204). Several kits can easily be combined to make larger canopies. Supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Footprint 210mm x 43mm

Adds the finishing touches to any signal box (See Ratio 236 and Peco NB-3 kits); it contains all you need to fit out a typical signal box including a 20-lever frame and a level crossing operating wheel. This kit also includes etched window frames, glazing, barge boards, guttering and downpipes. Glue and paints required to complete model.

Standard GWR Signal Box, numbered 8/28b by the Signalling Record Society, installed from the 1920's up until WW2. Our kit includes interior details such as levers, stove , desk and brass etched window frames. Supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Footprint 60mm x 25mm

A Southern Railway design that will span 2 tracks and includes smoke deflectors. This kit is easily extended using additional kits; glue and paints required to complete model. Span between tracks 75mm.

42 sacks, 10 pallets and 24 barrels. Glue and paints required to complete model.

This kit represents a typical Goods Shed, essential to most railway stations for the storage and transfer of dry goods to road vehicles for distribution. The Peco range of wagon loads (e.g. NR-203 Timber Loads) for 10 and 15 ft. wagons provide realistic deliveries. Supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Footprint 90mm x 70mm

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 356mm of fencing and includes 4 gates; the SR's modular design makes it easy to form ramp sections or follow other changes in ground contour.

Pack contains 3 x 63mm lengths of etched brass laddering and includes safety cages and fixings.

A common style of fencing found in many locations. Length: 840mm. Glue is required to complete this model.

A common style of fencing found in many locations. Length: 840mm. Glue is required to complete this model.

These simple kit lamps can represent oil, gas or electric lamps. Supplied in a pack 4; supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model.

This common type of water tower is usually found tucked away and used to supply individual water cranes (2 included with kit - Ratio Water Crane kit 212 is available if more are required). The water flow was controlled from the hand wheels on the cranes. Supplied with pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Footprint 34mm x 29mm

This basic crane is an essential for all station yards, often found inside goods sheds or on loading banks. Used to lift loads up to 1 ton, the boom can be swung round on its base to transfer goods from road to rail vehicles. Supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Base Diameter: 25mm

Stations often had these Water Cranes at the end of the platforms so the locomotives could be refilled without detaching them from the train. Also included is a coke brazier, called a 'fire devil' to keep the cast iron pipe from freezing up during the winter. These cranes were usually supplied by a large water tank (see Ratio Water Tower kits 215, 256 and Loco Servicing Depot kit 206). Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

10 Telegraph poles, these also carried railway bell codes and phone connections between signal boxes and stations as well as GPO lines. Height approx 50mm

Kit for 2 Platform Ramps to match Ratio Straight Platform Sections kit (Ref 209). Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 120mm x 40mm each.

Kit contains parts to make a 240mm long and 40mm wide platform; easily extended by using further kits. Use Ratio Platform Ramps kit 210 with these platforms. Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Apex canopy with valancing, stanchions and girders. The glazed sections can be placed at will. Although typical of GWR designs, this canopy can be used for almost any railway company. Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 200mm x 43mm

This superb kit is modelled on the overall roof at Ashburton, Devon. Designed for use with Station Building kit (Ref 204), it will enable you to build a GWR station quickly and easily. Although a specific prototype, the design is typical of many other regions including some tropical countries where it was intended to shelter passengers from the sun as well as rain. Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 153mm x 82mm

Complements your Engine Shed (See Ratio Kit 203). Kit includes a rectangular water tower, water crane, coaling stage with coal staithes and hoist with buckets. Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 90mm x 30mm.

With this kit you can add a 2nd canopy to Station Building kit (Ref 204) for use on an island platform, or alternatively as an awning on the 'taxi side' of the station building. Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

A model of the station at Castle Cary, Somerset. Although of typically GWR design, it can be adapted to suit that of other railway companies. The kit includes notice boards, telephone and first aid boxes. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 110mm x 32mm.

Provide a home for your locos, giving them cover from the elements and a place for repairs and maintenance. It is normal to find a water tower (Ratio Water Tower 215 and Large Water Tower 256 kits), and coaling stage (Ratio Loco Servicing Depot Ref 206) nearby, and an inspection pit (Peco NB-56F) was also often included. Can be used as either a single or through shed. Multiple kits can be joined together if required. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 95mm x 48mm

Keep on the right side of health and safety regulations - use these double rail stanchions in locations wherever the general public are allowed. Pack contains 20 injection moulded supports and approx 2 x 400mm length of nickel silver railing.

Always difficult to scratchbuild, these realistic features will enhance any industrial installation that needs a single rail safety barrier. Pack contains 20 injection moulded supports and 400mm length of brass wire.

A 45mm long replication of a wooden staircase, such as would be used to provide access to a signal box or other raised office/factory areas. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

A common feature of country stations large and small, whilst market town cattle docks could be very large indeed. Our model is of the one at Yeovil Pen Mill (GWR) Station, Somerset. Livestock (See Modelscene Cows Ref. 5179, Sheep and Lambs Ref. 5177, Pigs Ref. 5176, and Horses Ref. 5178) was conveyed on British railways until around 1973, although many cattle docks remained in place unused, becoming overgrown - an interesting scenic feature. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 90mm x 55mm

Includes a lever, cord, screw eyes and return spring - everything you need to operate one turnout.

2 brick built chimney stacks with pots in kit form. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Pack includes 24 9mm x 16mm classic Great Western style signal box windows.

Pack includes parts to make a pair of these heavy duty design bogies that feature cast steel type sideframes. Kit includes bolster, wheels and tension lock couplings; supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Pack includes parts to make a pair of these Bar Frame type bogies as included in the GW Bolster A kit (Ref 562) and the LMS Bogie Iron Ore Wagon (Ref 571). Kit includes bolster, wheels and tension lock couplings; supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Pack contains 1 pair, essential detail for all model corridor train stock.

Detail pack for coach roofs (roof not included). Pack contains 20 ventilators, 12 lamp tops.

The Peco 'Shows You How' series of booklets give practical, clearly laid out information and instruction on a wide range of model railway topics. With a number of well-illustrated step-by-step articles, backed up with helpful text, this booklet explains how to upgrade a modeller's favourite engine. Subjects covered include renaming & renumbering, upgrading moulded details, adding crew figures, and detail painting and weathering.

Pack includes parts to make a pair of these LNWR design bogies. Kit includes wheels and tension lock couplings; supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Pack includes parts to make a pair of these Midland railway design bogies. Kit includes wheels and tension lock couplings; supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

The Peco 'Shows You How' series of booklets give practical, clearly laid out information and instruction on a wide range of model railway topics. This booklet looks at the construction of the Wills Craftsman range of building kits, and the flexibility of design and construction offered by this range.

The Peco 'Shows You How' series of booklets give practical, clearly laid out information and instruction on a wide range of model railway topics. This booklet looks at the installation of the Peco 00 Overhead Catenary system; it is included in the Catenary Mast pack (Ref LC-100) as the Instruction and Installation Manual.

The Peco 'Shows You How' series of booklets give practical, clearly laid out information and instruction on a wide range of model railway topics. This booklet looks at the concept of DCC Sound, and the options available for installing a sound chip in a locomotive. For more information on Digital Command Control (DCC) , see our booklets Introducing DCC (No 17) and DCC Decoder Installation (No 20).

The Peco 'Shows You How' series of booklets give practical, clearly laid out information and instruction on a wide range of model railway topics. There is a wide range of options available for the remote control of Points and Signals, this booklet explores them and gives practical advice to help you choose the system that suits you and your layout operation.

The Peco 'Shows You How' series of booklets give practical, clearly laid out information and instruction on a wide range of model railway topics. This booklet looks at the methodology behind colour light signalling, and gives practical advice on the placing and operation of signals.

The Peco 'Shows You How' series of booklets give practical, clearly laid out information and instruction on a wide range of model railway topics. This booklet looks at the methodology behind semaphore signalling, and gives practical advice on the placing and operation of signals.

The Peco 'Shows You How' series of booklets give practical, clearly laid out information and instruction on a wide range of model railway topics. This booklet gives easy to follow instructions and diagrams on the wiring relating to Electrofrog turnouts, including 3 way turnouts, long crossings and single and double slips. For more information on layout wiring, see our booklets Wiring the Layout Part 1 (No 4) and Part 2 (No 5).

The Peco 'Shows You How' series of booklets give practical, clearly laid out information and instruction on a wide range of model railway topics. This booklet looks at the concepts, possibilites and equipment available for DCC operation. For more information on Digital Command Control (DCC), see our booklets DCC Decoder Installation (No 20) and Introducing DCC Sound (No 25).

The Peco 'Shows You How' series of booklets give practical, clearly laid out information and instruction on a wide range of model railway topics. This booklet explores the possibilities of how you can add depth and perspective to your layout by providing an appropriate backscene. For more information on scenic detailling, see our booklets Modelling Water (No 12), Modelling the Landscape (No 13), Detailing the Landscape (No 14), and Adding the Background (No 15).

The Peco 'Shows You How' series of booklets give practical, clearly laid out information and instruction on a wide range of model railway topics. This booklet looks at the construction of a larger scale (0 Gauge and larger) layout in the great outdoors, giving practical advice on planning and building a railway outdoors. See our booklet Railway Modelling Outdoors in the Smaller Scales (No 18) for outdoor railways in scales up to 0 Gauge.