These towers are an impressive sight and were an essential feature on mainline railways. The Pecoscene ranges provide the perfect loading material, Real Coal (PS-330 -332), Limestone (PS-342 and 3), Sand (PS-344), Iron Ore (PS-340), Grey Stone (PS-300- 307), and Brown Stone (PS-310 - 317) for a quarry, mine or pit loading hopper. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint: 116mm x 92mm, Height 181mm

These specially reinforced ARP (Air Raid Precautions) signal boxes featured substantial construction, primarily to protect the locking room gear from bomb blasts during air raids in World War II. A number of similar signal box designs were still to be found around the rail network until quite recently, due to them being difficult to demolish!
The 259 includes all moulded parts required which are produced to a high standard and in base colours. Kit requires painting and light weathering to create the signal box pictured above.

These specially reinforced ARP (Air Raid Precautions) signal boxes featured substantial construction, primarily to protect the locking room gear from bomb blasts during air raids in World War II. A number of similar signal box designs were still to be found around the rail network until quite recently, due to them being difficult to demolish!
The 554 includes all moulded parts required which are produced to a high standard and in base colours. Kit requires painting and light weathering to create the signal box pictured above.

This 20,000 gallon design is equally at home replenishing water troughs, a large motive power depot or supplying several platform mounted water cranes (See Ratio Water Crane and Fire Devil kit 413 and Peco LK-2 Water Cranes). Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 122mm x 49mm

Adds the finishing touches to any signal box (See Ratio 500, 503, 536, 552 and Wills SS48 kits); it contains all you need to fit out a typical signal box including a 20-lever frame and a level crossing operating wheel. Glue and paints required to complete model.

A essential feature on steam era main lines for over 100 years; this kit contains parts to make 760mm of troughs and includes relevant signboards. Use in conjunction with the large Water Tower (Ref 551). Glue and paints are required to complete this model.

With its fine scale latticework and curved section roof, this typical footbridge will add interest and a sense of importance to any model station.The versatile kit design means that the stairs can be assembled to face in either direction or straight off the end of the bridge. Additional kits can be used to create multiple spans, whilst larger, busier stations often had 2 stairways to each platform, leading off in both directions. Could also be used without the roof sections at a large terminus under an overall station canopy. Supplied with pre-coloured parts although painting and/or weathering (See the Pecoscene Weathering Powder range PS-360 - 365) can add realism; glue is required to complete this model. Span: 180mm

These towers are an impressive sight and were an essential feature on mainline railways. The Pecoscene ranges provide the perfect loading material, Real Coal (PS-330 -332), Limestone (PS-342 and 3), Sand (PS-344), Iron Ore (PS-340), Grey Stone (PS-300- 307), and Brown Stone (PS-310 - 317) for a quarry, mine or pit loading hopper. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint: 116mm x 92mm, Height 181mm

This kit is modelled on the Midland Railway standard 4d box with characteristic hipped roof, and is based on the prototype at Swadlincote Junction, Leics. This timeless design lasted right up to the demise of mechanical signalling. The Ratio Signal Box Interior kit 553 will provide a wealth of interior detail. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 130mm x 50mm.

The essential items for all stations until recently was a goods shed. Inside, dry goods were stored and transhipped from road to rail via the internal platform. The shed usually had a crane (Ref 531) or hoist (Ref 543) inside, whilst pallets and sacks (Ref 514) would be seen stacked around the site. A good example of this type of goods shed can still be seen standing in Ross on Wye, long after the railway has disappeared. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 155mm x 170mm

The kit comprises a coaling stage, water tower with crane, and a hoist for loading the coal. This model and the Engine Shed kit (Ref 522) make a good starting point for any layout in need of steam engine facilities. The Pecoscene Real Coal range (PS-330 -332) provides the perfect addition, as do the Pecoscene Ash and Cinder Scatter Materials (PS-320 - 322). An Inspection Pit (Peco LK-56/156) was also a common feature. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder PS-362 Coal Dust); glue is required to complete this model. Footprint: 140mm x 80mm

In the days when everything came by rail, even the smallest goods yard would provide a facility for the local coal merchant next to a siding. The Ratio 526 Coal Sacks kit and Peco Scene Real Coal Refs PS-330,1 and 2 can provide extra detailing, as can the Modelscene Coalman and Scales Ref. 5029. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 140mm x 30mm

Suitable for extending the Oil Depot (Ref 529). The Peco Wonderful Wagons Petrol Tanker Kits R-75RD and R-75S kits can be used as delivery vehicles. Kit includes pipe fittings and base; c Footprint 95mm x 140mm

Oil depot for distribution of domestic oil, which was transferred to road vehicles to deliver to domestic customers. Kit includes hut, base , pipe fittings, catwalk, ladders and Esso transfers. The Peco Wonderful Wagons Petrol Tanker Kits R-75RD and R-75S kits can be used as delivery vehicles. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 180mm x 95mm

These were a common feature in sidings where repairs, cleaning and maintenance were effected. This shed will cover 2 tracks and can easily be extended; the kit includes guttering and centre walkway. A versatile kit with many uses both on and off the railway. Glue and paints required to complete model. Footprint 320mm x 105mm.

8 Round arch-topped 19th Century style window frame mouldings 20mm High x 11mm Wide.

Stone edged platform with brick support will make up various combinations of platform; glue and paints required to complete model. See also Modelscene Station Staff 5059, Passengers Standing Sets A and B 5057 and 5058. Footprint: 480mm x 92mm

This versatile building would contain a boiler to provide steam either for a pump raising water or to generate electricity for a small factory. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 110mm x 90mm

A model of the station at Castle Cary, Somerset. Although of typically GWR design, it can be adapted to suit that of other railway companies. The kit includes notice boards, telephone and first aid boxes. See also Modelscene Station Staff 5059, Passengers Standing Sets A and B 5057 and 5058 and Passengers Seated Ref. 5056. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 210mm x 135mm (inc. canopy)

A Southern Railway design that will span 2 tracks and includes lamps and smoke deflectors. Glue and paints required to complete model. Span 150mm.

A Gantry to support signals, such as the semaphore signals in our Advanced Construction packs Ref 466 (GWR), 476(LMS), 477(LNWR) and 486(LNER/SR). It can also be used to mount colour light signals, and route and platform indicators. Glue and paints required to complete model.

A common feature of country stations large and small, whilst market town cattle docks could be very large indeed. Our model is of the one at Yeovil Pen Mill (GWR) Station, Somerset. Livestock (Modelscene Cows Ref. 5100, Sheep and Lambs Ref. 5110, Pigs Ref. 5108, and Horses Ref.5105) was conveyed on British railways until around 1973, although many cattle docks remained in place unused, becoming overgrown - an interesting scenic feature. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 170mm x 110mm

4 x 143mm lengths of laddering.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 860mm of countryside fencing.

This kit contains the parts to make 1 Upper Quadrant Home or Distant Signal. Glue and paints required to complete model.

Stations often had these Water Cranes at the end of the platforms so the locomotives could be refilled without detaching them from the train. Also included is a coke brazier, called a 'fire devil' to keep the cast iron pipe from freezing up during the winter. These cranes were usually supplied by a large water tank (see Ratio 506 and 551 and Wills SS34 kits). Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Advanced Construction Signals. Aimed at modellers with more experience, these kits enable you to custom make specific configurations of signals to suit your track layout and train paths. This kit enables you to replicate a GWR Junction/Bracket Home signal. Glue and paints required to complete model.

Suitable for extending the Coal Depot (Ref 532) or as a stand alone item. The Ratio 526 Coal Sacks kit and Peco Scene Real Coal Refs PS-330,1 and 2 can provide extra detailing. Glue and paints required to complete model. Footprint: 75mm x 32mm

Used for loading goods onto wagons, these cranes were to be found by bay platforms in small stations with no goods sheds or in the yard of larger stations. The kit includes fine chain for the operating drive wheels and cord for the jib. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model.

Advanced Construction Signals. Aimed at modellers with more experience, these kits enable you to custom make specific configurations of signals to suit your track layout and train paths. This kit contains 2 posts, 2 Home arms and 1 Distant. It can also be used with the Pratt Truss Gantry kit (Ref 478) to provide over track signals. Glue and paints required to complete model.

16 Telegraph poles, these also carried railway bell codes and phone connections between signal boxes and stations as well as GPO lines. Height 100mm

Classic style fencing modelled on a GWR design, but still seen also in many other places, around parks, public buildings, monuments etc. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains:
‚Ģ 2 x 100mm lengths of ramp fencing
‚Ģ 8 assorted gates

Classic style fencing modelled on a GWR design, but still seen also in many other places, around parks, public buildings, monuments etc. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 700mm of fencing.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 680mm of fencing.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains:
‚Ģ 340mm of Straight Fencing
‚Ģ 2 x 102mm lengths of Ramp Fencing
‚Ģ 1 Large and 1 Small Gate
‚Ģ 2 Ramp Gates
‚Ģ 1 Ticket Gate

Based on an LNWR design, but useful for emulating wooden station building structures seen across the British Isles. Pack contains 4 Plain Board Panels (27mm Wide by 53mm High). The modular design of this series (see also GJ01, 2 and 3) enables the construction of a tailor made building to suit the model location. Roofing (See the Wills Roofing Materials Pack SSMP229 Sheet and Batten Roofing and Ratio 516 Platform Valencing, Platform Canopy kits Ref Wills SS54 and Ratio 515), glue and paints are required to complete this model.

Based on an LNWR design, but useful for emulating wooden station building structures seen across the British Isles. Pack contains 4 Single Door Panels (27mm Wide by 53mm High). The modular design of this series (see also GJ01, 2 and 4) enables the construction of a tailor made building to suit the model location. Roofing (See the Wills Roofing Materials Pack SSMP229 Sheet and Batten Roofing and Ratio 516 Platform Valencing, Platform Canopy kits Ref Wills SS54 and Ratio 515), glue and paints are required to complete this model.

Based on an LNWR design, but useful for emulating wooden station building structures seen across the British Isles. Pack contains 4 Window Panels (27mm Wide by 53mm High). The modular design of this series (see also GJ01, 3 and 4) enables the construction of a tailor made building to suit the model location. Roofing (See the Wills Roofing Materials Pack SSMP229 Sheet and Batten Roofing and Ratio 516 Platform Valencing, Platform Canopy kits Ref Wills SS54 and Ratio 515), glue and paints are required to complete this model.

Based on an LNWR design, but useful for emulating wooden station building structures seen across the British Isles. Pack contains 4 Plain Board End Panels (47mm Wide by 53mm High). The modular design of this series (see also GJ02, 3 and 4) enables the construction of a tailor made building to suit the model location. Roofing (See the Wills Roofing Materials Pack SSMP229 Sheet and Batten Roofing and Ratio 516 Platform Valencing, Platform Canopy kits Ref Wills SS54 and Ratio 515), glue and paints are required to complete this model.

To fit under the Ratio Locomotive Lifting Hoist (545) or Overhead Traversing Crane (546) to allow them to run along tracks (not included). The kit makes a pair of rolling underframes. Length 61mm.

Kit includes:
‚Ģ 2 x 120mm ramps (1 L/H, 1 R/H)
‚Ģ 2 large gates and 2 small gates

Originally a war time structure, many of these have survived and found to have many different uses. The kit will make up 2 full length (approx 170mm long and 75mm wide) huts; however, the supplied internal bracings are also detailed as ends so it is also possible to make up 4 shorter (85mm long x 75mm wide) huts if required. Glue and paints are required to complete this model.

This kit is a model of a typical GWR brick built signal box with a hipped roof, built between 1896 and 1921. In practice there were many small differences between individual signal boxes as they were often tailored to fit the location, a good example is on the South Devon Railway at Buckfastleigh. The Ratio Signal Box Interior kit 553 will provide a wealth of interior detail. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint: Approx 90mm x 48mm

This kit replicates the precast concrete Southern Region example, often paired with the Concrete Hut (ref 518). A Fogman, when fog or snow reduced visibility, placed detonators on the rails ahead of signals or temporary speed restrictions imposed due to works etc. to provide additional warning to train drivers. The kit also includes a set of platelayers tools. Glue and paint are required to complete this kit. Footprint 20mm x 15mm.

From the late 1960's the spread of shipping containers revolutionised the transport of goods. On the railways marshalling yards gave way to intermodal depots as containers are transferred between ships, trains and road vehicles. The Rolling Underframe kit (Ref 546A) can be added to transform this unit into a movable crane. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint; Sides 61mm wide X 125mm High, Span 153mm

Modelled on a hoist found at Plymouth Laira depot which is still in use today assisting with the maintenance of Locos and rolling stock. An Inspection Pit (Peco LK-56/156) was also often provided.The Rolling Underframe kit (Ref 546A) can be added to transform this unit into a movable crane. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 61mm wide, Span 90mm

Where carriages, multiple unit sets or modern locos are stored for cleaning and maintenance, narrow platforms are provided for access. Still widely used today alongside carriage sidings, and also within storage and maintenance facilities (See Ratio 527 Carriage Shed and Wills Modern SSM300 Modern Industrial Building and SSM315 Extension kits). Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint: 500mm long plus access steps

Used for light lifting work in goods depots and other yards. Also to be found inside goods sheds for unloading wagons. Chain included; kit requires glue and paints to complete.