Built in 1930 (repeating a 1921 GNR design), these wagons (diagram 70) carried brick between Peterborough and London. Examples were in use until 1966. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings. Glue and paint will be required, along with appropriate transfers. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

Eighty of these wagons (diagram 69) were built in the 1930s to carry fertilizer from the I.C.I. Works at Billingham, Tee-side. Many ended their days carrying refuse in the Kings Cross area in the 1960s.These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings. Glue and paint will be required, along with appropriate transfers. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

These coach kits comprise chassis components, sides, ends, roof ,duckets, buffers, wheels as illustrated. These versatile kits can be built with or without the guards compartment. 3 body kits could be combined to create a longer bogie coach (bogies not supplied). Supplied in Green livery (couplings, paint, transfers not included).

White Metal Kit of typical vehicle based on the Welsh narrow gauge stock from the heyday of the slate traffic era. (Couplings, paint and transfers not included).

These coach kits comprise chassis components, sides, ends, roof ,duckets, buffers, wheels as illustrated. These versatile kits can be built with or without the guards compartment. 3 body kits could be combined to create a longer bogie coach (bogies not supplied). Supplied in Maroon livery (couplings, paint, transfers not included).

Plastic Kit of typical vehicle based on the Welsh narrow gauge stock from the heyday of the slate traffic era. (Couplings, paint and transfers not included).

White Metal Kit of typical vehicle based on the Welsh narrow gauge stock from the heyday of the slate traffic era. (Couplings, paint and transfers not included).

White Metal Kit of typical vehicle based on the Welsh narrow gauge stock from the heyday of the slate traffic era. (Couplings, paint and transfers not included).

Plastic Kit of typical vehicle based on the Welsh narrow gauge stock from the heyday of the slate traffic era. (Couplings, paint and transfers not included).

White Metal Kit of typical vehicle based on the Welsh narrow gauge stock from the heyday of the slate traffic era. (Couplings, paint and transfers not included).

Equally suitable for standard 0 gauge or 0-16.5, these beautifully cast unpainted White Metal figures will bring life and human interest to your layout.

Equally suitable for standard 0 gauge or 0-16.5, these beautifully cast unpainted White Metal figures will bring life and human interest to your layout.

Block trains carrying specialised loads are a feature of the modern railway. All Peco wagons feature free running wheels in pin point axles. The ELC coupling, whilst compatible with the standard N gauge couplings, keeps a realistic distance between vehicles and enables the PL-25 electro magnetic decoupler to be used for remote uncoupling.

Block trains carrying specialised loads are a feature of the modern railway. All Peco wagons feature free running wheels in pin point axles. The ELC coupling, whilst compatible with the standard N gauge couplings, keeps a realistic distance between vehicles and enables the PL-25 electro magnetic decoupler to be used for remote uncoupling.

Block trains carrying specialised loads are a feature of the modern railway. All Peco wagons feature free running wheels in pin point axles. The ELC coupling, whilst compatible with the standard N gauge couplings, keeps a realistic distance between vehicles and enables the PL-25 electro magnetic decoupler to be used for remote uncoupling.

Block trains carrying specialised loads are a feature of the modern railway. All Peco wagons feature free running wheels in pin point axles. The ELC coupling, whilst compatible with the standard N gauge couplings, keeps a realistic distance between vehicles and enables the PL-25 electro magnetic decoupler to be used for remote uncoupling.

Block trains carrying specialised loads are a feature of the modern railway. All Peco wagons feature free running wheels in pin point axles. The ELC coupling, whilst compatible with the standard N gauge couplings, keeps a realistic distance between vehicles and enables the PL-25 electro magnetic decoupler to be used for remote uncoupling.

Railway companies all had a stock of their own vehicles for carrying goods and merchandise around their network, and also onto other companies' routes as and when required. These were integrated into British Railways at Nationalisation; some of them to be once more re liveried under sectorisation as the network was prepared to be returned to private ownership. All PECO wagons feature free running wheels in pin point axles. The ELC coupling, whilst compatible with the standard N gauge couplings, keeps a realistic distance between the vehicles and enables the PL-25 electro magnetic decoupler to be used for remote uncoupling.

Railway companies all had a stock of their own vehicles for carrying goods and merchandise around their network, and also onto other companies' routes as and when required. These were integrated into British Railways at Nationalisation; some of them to be once more re liveried under sectorisation as the network was prepared to be returned to private ownership. All Peco wagons feature free running wheels in pin point axles. The ELC coupling, whilst compatible with the standard N gauge couplings, keeps a realistic distance between the vehicles and enables the PL-25 electro magnetic decoupler to be used for remote uncoupling.

In August 2023 DB Cargo retired the last of the former BR/ECC china clay CDA hoppers after a service life of 35 years. These unique and distinctive wagons will be missed by enthusiasts but thanks to PECO, modellers can keep their legacy going in model form!

Note that the CDA wagons are now fitted with metal-tyred wheels as standard.

The CDA China Clay hopper, and the HAA Coal Hopper, are closely related, sharing the same design and operational principles, with bottom hopper doors opened to empty the contents, in the case of china clay, for loading into ships at Carne Point, near Fowey in Cornwall. As china clay must be kept dry special rolling tarpaulin covers protected the load, as featured on our models.

Kit consists of parts to build one complete Train Shed Unit which will span two tracks, and can be combined with further units to build a larger facility if required. Inspection pits were often placed in the tracks in these buildings (See NB-56F). Easily adapted to create a modern building for non railway use.

Kit contains detailed plastic parts, rail and electrical contacts, plus full instructions. A motorising kit will be available soon.

Modelled on the Saxby and Farmer design that was to be found around the country, this kit can be combined with further kits to make a larger signal box if required. Use the Ratio Signal Box Interior kit No. 224 for a 20 lever frame, level crossing wheel and other detail.

This plastic kit contains a platform shelter plus a timber and brick hut.

The pre coloured parts of this plastic kit can be assembled in a number of ways ; further kits can be combined to make a larger structure if required.

This kit will make 2 Station houses with single storey extensions; assembly can be varied , extra doors and windows are included.

A pre coloured plastic kit that can be put together in a number of different configurations.

This pre coloured plastic kit is modelled on the iconic BR design built at Potters Bar in the 1950's. Full instructions included.

A pre coloured plastic kit including a selection of accessories and full instructions.

Kit of a typical small hut seen all over the railway system

Kit of a typical small hut seen all over the railway system

A accurately laser cut wood kit supplemented by injection moulded roof, windows and doors. Glue and paints required to complete model.

This plastic kit contains a platform shelter plus a timber hut.

The pre coloured parts of this plastic kit can be assembled in a number of ways; further kits can be combined to make a larger structure if required.

This kit will make 2 Station houses; assembly can be varied; extra doors and windows are included.

This kit will make 2 Station houses; assembly can be varied , extra doors and windows are included.

The pre coloured parts of this plastic kit can be assembled in a number of ways; further kits can be combined to make a larger structure if required.

The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. This pack includes:
‚Ģ 5 500mm long OHLE Contact Wires for use with the LC-100 Catenary System 12 Mast Pack and LC-110 Catenary System Mast.

The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. This pack includes:
‚Ģ 5 380mm long OHLE Contact Wires for use with the LC-100 Catenary System 12 Mast Pack and LC-110 Catenary System Mast.

The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. This pack includes:
‚Ģ 5 340mm long OHLE Contact Wires for use with the LC-100 Catenary System 12 Mast Pack and LC-110 Catenary System Mast.

The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. This pack includes:
‚Ģ 5 260mm long OHLE Contact Wires for use with the LC-100 Catenary System 12 Mast Pack and LC-110 Catenary System Mast.

6 914mm lengths of Code 143 Flat Bottom Rail for track and turnout construction.

6 914mm lengths of Code 124 Bullhead Rail for track and turnout construction.

These finely detailed ready to run coaches and wagons are accurately modelled on the rolling stock of the Lynton and Barnstaple Railway, both as an independent railway and after its' absorption into the Southern railway in 1922. They are also available painted but unlettered for those modellers who wish to tailor them for use on other lines.

These finely detailed ready to run coaches and wagons are accurately modelled on the rolling stock of the Lynton and Barnstaple Railway, both as an independent railway and after its' absorption into the Southern railway in 1922. They are also available painted but unlettered for those modellers who wish to tailor them for use on other lines.

Wagon 22 was an open bogie vehicle of 8 ton capacity, built at the Lynton and Barnstaple Railway’s workshop at Pilton in 1903 to complement the existing fleet, which included a number of similar vehicles built by Bristol Wagon and Carriage Works. The LandBR had no regular freight workings, and goods vehicles were added to passenger trains as required. They were all fitted with vacuum brakes to allow them to be marshalled between the loco and coaches, and negate the need for a separate goods brakevan. Freight moved on the LandBR included coal, ballast, farm machinery, hay and even manure! From new all freight vehicles were painted light grey with black ironwork. Under Southern Railway ownership the wagons were repainted standard SR brown, and number 22 became SR number 28313. Our model faithfully represents this particular vehicle, with careful attention being paid to details in the livery, plus separately-fitted brake levers and vacuum brake pipes. As with all of our previous models in this scale, they are free running and complete with couplings, which plug into the integral NEM pocket.

Wagon 22 was an open bogie vehicle of 8 ton capacity, built at the Lynton and Barnstaple Railway’s workshop at Pilton in 1903 to complement the existing fleet, which included a number of similar vehicles built by Bristol Wagon and Carriage Works. The LandBR had no regular freight workings, and goods vehicles were added to passenger trains as required. They were all fitted with vacuum brakes to allow them to be marshalled between the loco and coaches, and negate the need for a separate goods brakevan. Freight moved on the LandBR included coal, ballast, farm machinery, hay and even manure! From new all freight vehicles were painted light grey with black ironwork. Under Southern Railway ownership the wagons were repainted standard SR brown, and number 22 became SR number 28313. Our model faithfully represents this particular vehicle, with careful attention being paid to details in the livery, plus separately-fitted brake levers and vacuum brake pipes. As with all of our previous models in this scale, they are free running and complete with couplings, which plug into the integral NEM pocket.

These finely detailed ready to run coaches and wagons are accurately modelled on the rolling stock of the Lynton and Barnstaple Railway, both as an independent railway and after its' absorption into the Southern railway in 1922. They are also available painted but unlettered for those modellers who wish to tailor them for use on other lines.