A small signal box as would be seen at a small country station, or controlling the exit from a yard or industrial area. Use SS89 Point Rodding to fill in this important detail on your layout. Footprint:48mm x 36mm.

00 Card wagon body kits, designed to be used with the R20 Underframe kit. Romford wheels and bearings can be used to complete the model.

00 Card wagon body kits, designed to be used with the R20 Underframe kit. Romford wheels and bearings can be used to complete the model.

Three creels or lobster pots in a row, for boat decks or fish docks. (also available as part of QS427)
Size approx (mm) L22 x W9 x H7. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Introduced to carry valuable cattle with their attendants, they were mainly seen on passenger trains until the 1950s. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings. Glue and paint will be required, along with appropriate transfers. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

(Diagram V22) Introduced in 1931 to carry express goods traffic between the main stations on the GWR system. One hundred were built and lasted in service until the 1960s.These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings. Glue and paint will be required, along with appropriate transfers. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

‘Conflat A’ Container Wagon with BD container (diagram 3/050) 4500 were built in 1955/56 purely to carry containers. The BD was the most common general merchandise container on BR. Over 9000 were built to this diagram.
These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings. Glue and paint will be required, along with appropriate transfers . Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

Pack of 3 for Hornby (TM) wagons.

Pack of 3 for Hornby (TM) wagons.

Pack of 3 for Hornby (TM) wagons.

A very useful small building in the traditional industrial/railway architectural style.
Size (mm) 67 x 35 x 56. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Fits the latest Bachmann (TM) Blue Riband 16T mineral wagons.
Size (mm) 64 x 30. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

A 12mm gauge vehicle; these finely moulded plastic wagon kits come complete with pin point axle wheels. Glue and paint will be required, along with appropriate transfers.

These finely moulded plastic wagon kits come complete with pin point axle wheels. Glue and paint will be required, along with appropriate transfers.

These finely moulded plastic wagon kits come complete with pin point axle wheels. Glue and paint will be required, along with appropriate transfers.

These finely moulded plastic wagon kits come complete with pin point axle wheels. Glue and paint will be required, along with appropriate transfers.

These coaches were constructed between 1890 and 1902 for rural duties, but lasted up until the 1950's on workmen's trains and the like. Glue, paint and transfers are required to complete this model.

Adds the finishing touches to any signal box (See Ratio 500, 503, 536, 552 and Wills SS48 kits); it contains all you need to fit out a typical signal box including a 20-lever frame and a level crossing operating wheel. Glue and paints required to complete model.

This 20,000 gallon design is equally at home replenishing water troughs, a large motive power depot or supplying several platform mounted water cranes (See Ratio Water Crane and Fire Devil kit 413 and Peco LK-2 Water Cranes). Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 122mm x 49mm

A essential feature on steam era main lines for over 100 years; this kit contains parts to make 760mm of troughs and includes relevant signboards. Use in conjunction with the large Water Tower (Ref 551). Glue and paints are required to complete this model.

With its fine scale latticework and curved section roof, this typical footbridge will add interest and a sense of importance to any model station.The versatile kit design means that the stairs can be assembled to face in either direction or straight off the end of the bridge. Additional kits can be used to create multiple spans, whilst larger, busier stations often had 2 stairways to each platform, leading off in both directions. Could also be used without the roof sections at a large terminus under an overall station canopy. Supplied with pre-coloured parts although painting and/or weathering (See the Pecoscene Weathering Powder range PS-360 - 365) can add realism; glue is required to complete this model. Span: 180mm

These towers are an impressive sight and were an essential feature on mainline railways. The Pecoscene ranges provide the perfect loading material, Real Coal (PS-330 -332), Limestone (PS-342 and 3), Sand (PS-344), Iron Ore (PS-340), Grey Stone (PS-300- 307), and Brown Stone (PS-310 - 317) for a quarry, mine or pit loading hopper. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint: 116mm x 92mm, Height 181mm

The kit comprises a coaling stage, water tower with crane, and a hoist for loading the coal. This model and the Engine Shed kit (Ref 522) make a good starting point for any layout in need of steam engine facilities. The Pecoscene Real Coal range (PS-330 -332) provides the perfect addition, as do the Pecoscene Ash and Cinder Scatter Materials (PS-320 - 322). An Inspection Pit (Peco LK-56/156) was also a common feature. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder PS-362 Coal Dust); glue is required to complete this model. Footprint: 140mm x 80mm

This kit is modelled on the Midland Railway standard 4d box with characteristic hipped roof, and is based on the prototype at Swadlincote Junction, Leics. This timeless design lasted right up to the demise of mechanical signalling. The Ratio Signal Box Interior kit 553 will provide a wealth of interior detail. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 130mm x 50mm.