BROWSE PECO PRODUCTS
Browse through our complete product portfolio.
766 Products Found
BR FM Container
Diagram 3/201; a Conflat wagon or road vehicle load. As supplied with Conflat A Container Wagon kit PC46.
BR 10 foot Chassis kit, Vacuum Fitted with Clasp Brake Shoes
Kit and scratch builders accessory; as included in the 12 ton 'Vanwide' kit PC41. Includes both LMS (J' Hanger) and BR Type Spring Suspension detail.
LNER DX Open Container kit
As supplied with the Conflat 'S' Container wagon kit PC35; open containers were widely used until the early 1960's.
BR 12 foot Wagon Chassis kit (Unfitted) - Morton Brake
Kit and scratch builders accessory; as included in the 21 ton Loco Coal Wagon kit PC31.
BR 10 foot Chassis kit, Vacuum Fitted with Push Brake Shoes
Kit and scratch builders accessory; as included in the Shock Absorbing Open wagon kit PC28.
BR/RCH 9 foot Wagon Chassis kit (Unfitted) - Double Brake
Kit and scratch builders accessory; as included in the 16 ton Mineral Wagon kit PC22.
BR/RCH 9 foot Wagon Chassis kit (Unfitted) - Morton Brake
Kit and scratch builders accessory; as included in the 16 ton Mineral Wagon kit PC21.
LNER 10 foot Chassis kit, Vacuum Fitted with Clasp Brake Shoes
Kit and scratch builders accessory; as included in the 12 ton 5 Plank Open wagon kit PC25.
Bolster Set
Kit and scratch builders accessory; as included in the 21 ton Twin Bolster wagon kit PC18.
Trestle Set
Kit and scratch builders accessory; as included in the LNER/BR Trestle wagon kit PC17.
Catenary Contact Wires 500mm
The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. This pack includes:
‚Ģ 5 500mm long OHLE Contact Wires for use with the LC-100 Catenary System 12 Mast Pack and LC-110 Catenary System Mast.
Catenary Contact Wires 380mm
The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. This pack includes:
‚Ģ 5 380mm long OHLE Contact Wires for use with the LC-100 Catenary System 12 Mast Pack and LC-110 Catenary System Mast.
Catenary Contact Wires 340mm
The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. This pack includes:
‚Ģ 5 340mm long OHLE Contact Wires for use with the LC-100 Catenary System 12 Mast Pack and LC-110 Catenary System Mast.
Catenary Contact Wires 260mm
The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. This pack includes:
‚Ģ 5 260mm long OHLE Contact Wires for use with the LC-100 Catenary System 12 Mast Pack and LC-110 Catenary System Mast.
Catenary Contact Wires 200mm
The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. This pack includes:
‚Ģ 5 200mm long OHLE Contact Wires for use with the LC-100 Catenary System 12 Mast Pack and LC-110 Catenary System Mast.
Catenary Mast Installation Jig
The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available.
‚Ģ The Installation jig is for use when installing the OHLE Catenary system. N.B. 2 of these jigs are included in the LC-100 Catenary System Startup Pack.
Catenary System Mast
The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. This pack includes:
‚Ģ An additional Mast plus push on/push off hangar to extend the LC-100 Catenary System Startup Pack.
Catenary System Startup Pack
The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. Contact wires available separately (Refs LC-150 - 4). This pack includes:
‚Ģ 12 Masts plus push on - push off hangars (additional masts available separately Ref. LC110)
‚Ģ 2 Installation Jigs (also available separately Ref LC-115)
‚Ģ Comprehensive Installation Guide (Available separately as SYH-26 Modelling Overhead Catenary)
Conductor Rail Chairs
For adding 3rd and 4th Conductor rails to existing track as found on Southern, Merseyside and London Transport systems, for example. Use IL-1 Code 60 rail with these chairs
LNWR Grand Junction Station Building Components: 4 Plain Board Panels
Based on an LNWR design, but useful for emulating wooden station building structures seen across the British Isles. Pack contains 4 Plain Board Panels (27mm Wide by 53mm High). The modular design of this series (see also GJ01, 2 and 3) enables the construction of a tailor made building to suit the model location. Roofing (See the Wills Roofing Materials Pack SSMP229 Sheet and Batten Roofing and Ratio 516 Platform Valencing, Platform Canopy kits Ref Wills SS54 and Ratio 515), glue and paints are required to complete this model.
LNWR Grand Junction Station Building Components: 4 Single Door Panels
Based on an LNWR design, but useful for emulating wooden station building structures seen across the British Isles. Pack contains 4 Single Door Panels (27mm Wide by 53mm High). The modular design of this series (see also GJ01, 2 and 4) enables the construction of a tailor made building to suit the model location. Roofing (See the Wills Roofing Materials Pack SSMP229 Sheet and Batten Roofing and Ratio 516 Platform Valencing, Platform Canopy kits Ref Wills SS54 and Ratio 515), glue and paints are required to complete this model.
LNWR Grand Junction Station Building Components: 4 Window Panels
Based on an LNWR design, but useful for emulating wooden station building structures seen across the British Isles. Pack contains 4 Window Panels (27mm Wide by 53mm High). The modular design of this series (see also GJ01, 3 and 4) enables the construction of a tailor made building to suit the model location. Roofing (See the Wills Roofing Materials Pack SSMP229 Sheet and Batten Roofing and Ratio 516 Platform Valencing, Platform Canopy kits Ref Wills SS54 and Ratio 515), glue and paints are required to complete this model.
LNWR Grand Junction Station Building Components: 4 Plain Board End Panels
Based on an LNWR design, but useful for emulating wooden station building structures seen across the British Isles. Pack contains 4 Plain Board End Panels (47mm Wide by 53mm High). The modular design of this series (see also GJ02, 3 and 4) enables the construction of a tailor made building to suit the model location. Roofing (See the Wills Roofing Materials Pack SSMP229 Sheet and Batten Roofing and Ratio 516 Platform Valencing, Platform Canopy kits Ref Wills SS54 and Ratio 515), glue and paints are required to complete this model.
Coal Wagon Load
Coal load to fit a Hornby (TM) 4 plank wagon.
Size 56.5 x 26.5mm. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Between the Tracks Railway Offices
A useful red brick railway office designed to fit between rail tracks as its title suggests and beside the line especially in front of a retaining wall, as doors are at each end of the building (one is set into a vestibule). There are two toilets - the smaller windows with outlet down pipes on the rear wall are a bit of a give-away! A separate chimney is supplied for fitting into a hole in the grey slate roof. Size (mm) L 135; W 45; H 60. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Wooden Workshop
This workshop is of a timber construction with felt roof, rainwater gutter and downpipe to the rear. Some offcuts of timber lie on the ground along the front wall while piled crates and a barrel are stored against the left end wall. Although labelled as a joiner's shop, this can be changed to whatever is required, for example a station name would turn this into a backwater branch line waiting room. It could be seen in a commercial environment as an office or stores. Size (mm) L 110; W 40; H40. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
General Purpose Railway Office
This medium sized brick built office with its pitched slate roof and traditional architecture has all the charm of a steam era railway building. It is ideally suited for a goods yard or station complex. Could also be used with a weighbridge or as a canal side office.
Size (mm) 70 x 43 x 67. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Hornby(TM) Coal Wagon Load
For Hornby (TM) wagons with internal measurements as shown.
Size (mm) 62 x 28. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Bachmann(TM) Coal Wagon Load
Sized for original Bachmann (TM) coal wagons, but they can be pared with a knife to fit into smaller open wagons.
Size (mm) 67 x 29. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Tree Trunks, Bound
Place near old woodland or put on bogie bolster wagons.
Size (mm) 123 x 33 x 20. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Cut Timber Load
For use in Cambrian (TM) OTA wagons or stored beside a tree plantation.
Size (mm) 132 x 32 x 30. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Assorted Merchandise
An interesting assortment of crates, sacks, barrels etc ready palleted.
Size (mm) 61 x 29 x 20. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Terracotta Pipes on Pallets
Drainage pipes for linesides, builder's yards and construction sites (See also Modelscene 5065 Sewage Pipes). Size (mm) 62 x 29 x 18. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Old Wooden Coal Staith and Toolbox
Size (mm) 70 x 40 x 25. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Brick Staithes with Coal
For use in coal merchants' yards, this brick built structure holds various grades of coal, accessible from both sides. Ideally suited for use with FL 126 and FL 166.
Size (mm) 130 x 60. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Coal Heap, Sacks and Shovel
For a working coal yard, can be used with FL 126.
Size (mm) 55 x 64 x 15. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Stockpile of Builders Materials
A versatile load for a lorry or house building plot.
Size (mm) 60 x 27 x 14. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Pile of Loose Red Bricks
A load of loose bricks as tipped from the back of a lorry.
Size (mm) 45 x 38 x 13. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Three Stacks of Red Bricks
Ideal for use on Modelscene pallets (Ref. 5081).
Size each (mm) 16 x 16 x 12. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.