Dieses Gleis ist ein Modell der heute in Großbritannien am häufigsten verwendeten Form von Betonschwellen mit einer Schiene mit flachem Boden. PECO Streamline Spur N Code 55 – Universelles Feingleissystem
Trotz einer geringen sichtbaren Schienenhöhe von nur 1,4 mm können Modelllokomotiven der Spur N aller Marken auf diesem Gleis fahren.
Der ausgeklügelte Schienenabschnitt von PECO 55 kombiniert Stärke und Haltbarkeit mit einem äußerst realistischen Aussehen und verwendet die gleichen universellen Schienenverbinder wie Code 80. Dieses Gleis ist ein Modell der heute in Großbritannien am häufigsten verwendeten Form von Betonschwellen mit einer Schiene mit flachem Boden. Die Geometrie dieser Serie wurde clever gestaltet, um den Bau bequemer, komplexer und ästhetisch ansprechender Formationen zu erleichtern. Weitere Einzelheiten zu Electrofrog-Weichen finden Sie in unseren Veröffentlichungen „Wiring the Layout“ Nr. 4 und 21.

Mit Tracksetta können Sie sicherstellen, dass Ihre Geraden wirklich gerade und Ihre Kurven glatt sind, ohne Knicke oder plötzliche Richtungsänderungen, die Entgleisungen unvermeidlich machen. Diese einfachen, aber effektiven Werkzeuge sind eine lohnende Investition, da eine gut verlegte Strecke für einen zuverlässigen Betrieb unerlässlich ist.

Mit Tracksetta können Sie sicherstellen, dass Ihre Geraden wirklich gerade und Ihre Kurven glatt sind, ohne Knicke oder plötzliche Richtungsänderungen, die Entgleisungen unvermeidlich machen. Diese einfachen, aber effektiven Werkzeuge sind eine lohnende Investition, da eine gut verlegte Strecke für einen zuverlässigen Betrieb unerlässlich ist.

Mit Tracksetta können Sie sicherstellen, dass Ihre Geraden wirklich gerade und Ihre Kurven glatt sind, ohne Knicke oder plötzliche Richtungsänderungen, die Entgleisungen unvermeidlich machen. Diese einfachen, aber effektiven Werkzeuge sind eine lohnende Investition, da eine gut verlegte Strecke für einen zuverlässigen Betrieb unerlässlich ist.

Mit Tracksetta können Sie sicherstellen, dass Ihre Geraden wirklich gerade und Ihre Kurven glatt sind, ohne Knicke oder plötzliche Richtungsänderungen, die Entgleisungen unvermeidlich machen. Diese einfachen, aber effektiven Werkzeuge sind eine lohnende Investition, da eine gut verlegte Strecke für einen zuverlässigen Betrieb unerlässlich ist.

Mit Tracksetta können Sie sicherstellen, dass Ihre Geraden wirklich gerade und Ihre Kurven glatt sind, ohne Knicke oder plötzliche Richtungsänderungen, die Entgleisungen unvermeidlich machen. Diese einfachen, aber effektiven Werkzeuge sind eine lohnende Investition, da eine gut verlegte Strecke für einen zuverlässigen Betrieb unerlässlich ist.

Mit Tracksetta können Sie sicherstellen, dass Ihre Geraden wirklich gerade und Ihre Kurven glatt sind, ohne Knicke oder plötzliche Richtungsänderungen, die Entgleisungen unvermeidlich machen. Diese einfachen, aber effektiven Werkzeuge sind eine lohnende Investition, da eine gut verlegte Strecke für einen zuverlässigen Betrieb unerlässlich ist.

Mit Tracksetta können Sie sicherstellen, dass Ihre Geraden wirklich gerade und Ihre Kurven glatt sind, ohne Knicke oder plötzliche Richtungsänderungen, die Entgleisungen unvermeidlich machen. Diese einfachen, aber effektiven Werkzeuge sind eine lohnende Investition, da eine gut verlegte Strecke für einen zuverlässigen Betrieb unerlässlich ist.

The PECO Streamline OO Bullhead track range has shaped up to be a very comprehensive system comprising flexible track, bullhead joiners, buffer stop, large radius, medium radius turnout, a crossing, double & single slips and now Y turnouts. There's enough there already for modellers to build a truly authentic steam-to-diesel transition period layout.

• PECO Streamline OO Bullhead Large Radius Y Turnout, Unifrog
• Shares the same geometry as the existing Streamline Code 100, 75 flat bottom tracks systems
• Compatible with existing Bullhead system
• Uses standard SL-110 Code 75 rail joiner or the SL-114 Bullhead rail joiner
• Length 220mm, 8.7 inches
• Radius 1829mm, 72 inches
• Frog angle 12 degrees
• Unifrog
• High quality nickel silver rail for all rail parts, for optimal electrical conductivity
• One-piece machined point blade
• Over-centre spring to lock the point blade in place
• An excellent track component where space restrictions prevent standard turnouts being used, such as in a goods yard.

Während sich unser HO-Gleis Code 83 perfekt für die Modellierung amerikanischer Hauptstrecken eignet, ist dieses neue Gleis Code 70 genau das Richtige für Nebenstrecken, wenig genutzte Abzweigungen, Abstellgleise usw. Tatsächlich eignet es sich perfekt für die Modellierung des frühen bis mittleren 20. Jahrhunderts Eisenbahn-Ära, als leichtere Schienen häufiger verwendet wurden. Dieses neue flexible Gleis verfügt über präzise Details der Schienenspitzen, korrekt proportionierte Schwellen (Schwellen) und eine Neusilberschiene. Es wurde nach demselben hohen Standard hergestellt, den Modellbauer von PECO gewohnt sind, und entspricht den von der NMRA festgelegten Spezifikationen.

Während sich unser HO-Gleis Code 83 perfekt für die Modellierung amerikanischer Hauptstrecken eignet, ist dieses neue Gleis Code 70 genau das Richtige für Nebenstrecken, wenig genutzte Abzweigungen, Abstellgleise usw. Tatsächlich eignet es sich perfekt für die Modellierung des frühen bis mittleren 20. Jahrhunderts Eisenbahn-Ära, als leichtere Schienen häufiger verwendet wurden. Dieses neue flexible Gleis verfügt über präzise Details der Schienenspitzen, korrekt proportionierte Schwellen (Schwellen) und eine Neusilberschiene. Es wurde nach demselben hohen Standard hergestellt, den Modellbauer von PECO gewohnt sind, und entspricht den von der NMRA festgelegten Spezifikationen.

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

The NEW Unifrog Conversion

The latest conversion to Unifrog is now available. This time we have updated the Streamline OO/HO scale Code 100 Small Radius "Y" turnout to conform to this new format. Produced from brand new tooling this replaced the former Insulfrog and Electrofrog SL-97 and SL-E97 (both of these are now discontinued and out of stock).

Y Turnouts are really useful track components - their main benefit being as great space-savers. By combining the Y with the short crossing you can create a tight radius double junction and using several Ys together allows you to fit more routes in a restricted space. Ideal when building small loco yards and goods sidings. It's what the real railways would have done after all! 

The Unifrog Conversion

On a Unifrog turnout the frog tip and wing rails are electrically isolated from all other rails. The turnout can be used as supplied on a DC or DCC layout without any modification, using the standard SL-10 rail joiner. If desired, the frog tip and wing rails can be powered by connecting the wire welded underneath to a changeover switch or microswitch working in unison with one of our turnout motors. Basically, as supplied the turnout operates as an Insulfrog turnout. If the frog is powered then it operates as an Electrofrog turnout. So, the best of both worlds in one unit!

Code 55

Use SL-310 metal joiners and SL-1208 joining sleepers. Use SL-311 insulating joiners to create isolated track sections (if using DCC control these are not required).

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb flat bottom rail. The flexible sleeper base is detailed with fine wood grain and spikes through British Railways’ BR1 baseplates under the rails, a combination that continues to be widely used on Britain’s railways.

Technical Specifications:

Length 180mm
Frog angle 11.25 degrees

Code 55

Use SL-310 metal joiners and SL-1208 joining sleepers. Use SL-311 insulating joiners to create isolated track sections (if using DCC control these are not required).

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb flat bottom rail. The flexible sleeper base is detailed with fine wood grain and spikes through British Railways’ BR1 baseplates under the rails, a combination that continues to be widely used on Britain’s railways.

Technical Specifications:

Length 135mm
Radius 466mm
Frog angle 11.25 degrees

Code 55

Use SL-310 metal joiners and SL-1208 joining sleepers. Use SL-311 insulating joiners to create isolated track sections (if using DCC control these are not required).

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb flat bottom rail. The flexible sleeper base is detailed with fine wood grain and spikes through British Railways’ BR1 baseplates under the rails, a combination that continues to be widely used on Britain’s railways.

Technical Specifications:

Length 135mm
Radius 466mm
Frog angle 11.25 degrees

The PECO Streamline OO Bullhead track range has shaped up to be a very comprehensive system comprising flexible track, bullhead joiners, buffer stop, large radius and medium radius turnouts , a crossing and two slips. There's enough there already for modellers to build a truly authentic steam to diesel transition period layout.

The PECO Streamline OO Bullhead track range has shaped up to be a very comprehensive system comprising flexible track, bullhead joiners, buffer stop, large radius and medium radius turnouts , a crossing and two slips. There's enough there already for modellers to build a truly authentic steam to diesel transition period layout.

This track models the most common form of concrete sleepering in use in Britain today, with flat bottom rail. PECO Streamline O Gauge Code 143 - Concrete Flexible Track.

SL-702FB PECO Streamline O Code 143 Flexible Track & Concrete SleeperTie

Flat bottom rail, 914mm, 3ft length / Nickel silver rail

View the film here: