Moulded foam ballast inlay in a realistic brown colour. Moulded units fit Turnouts and Crossings, and rolls are available for plain track (Streamline and Setrack). This inlay system adds extra realism as well as giving quieter, smoother running. Suitable for Code 100 and Code 75 track.

A popular size especially in the garden, SM-32 models are built to a scale of 16mm/foot and run on a gauge of 32mm, the equivalent of a two foot gauge railway. SM-32 has become the first choice for many narrow gauge enthusiasts who want to operate live steam locomotives by radio control, the large size of the locomotives means plenty of room for the receiver and control servos. The SM-32 Streamline track system is compatible with the SM-32 Setrack system.

Moulded foam ballast inlay in a realistic brown colour. Moulded units fit Turnouts and Crossings, and rolls are available for plain track (Streamline and Setrack). This inlay system adds extra realism as well as giving quieter, smoother running. Suitable for Code 100 and Code 75 track.

Easily assembled kit of a Train Protection and Warning System grid. Required by Railway Regulations on all main lines since 2004.

Narrow gauge sleeper built buffer stop.

Manual uncoupler for use with 009 couplings

Wagon Turntables were usually used to turn wagons through 90 degrees to access spur roads into warehouses etc. For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range depicts the slightly worn out old track of a picturesque old railway. It is compatible with the Peco 009 Setrack rigid track system.

Excellent model of the impressive buffer stops seen at most main line stations. Will give any model railway that authentic 'big city terminus' look.

Realistically simulated woodgrain mouldings with ballast textured surface on top. recessed to accommodate couplings.

A small but useful item to ensure the accurate spacing of double tracks in 00/H0 along both straight and curved sections. Also gauges platform height to the recommended 14mm (3ft 6ins in 4mm scale).

Makes re-railing steam locos and bogie vehicles simple - less handling too.

Also suitable for re-railing 009/H0e locomotives and stock.

A small but useful item to ensure the accurate spacing of double tracks in N along both straight and curved sections. Also gauges platform height to the recommended 7mm (3ft 6ins in 2mm scale).

Uncouplers - Manual type,for Elsie couplings and other similar types (2 per pack).

Magnetic uncoupler for use with stock fitted with the Peco Magni Simplex (R-3) couplings.

Insulated Rail Joiners - Plastic for both Code 55 and Code 80 track. Design prevents adjacent rails from touching whilst holding them in alignment.

Insulated rail joiners are required to provide electrical breaks where Electrofrog turnouts are used, for more details see our Wiring the Layout publications Nos 4 and 21.

Conducting Rail Joiners - Nickel silver for both Code 55 and Code 80 track

For use with Peco Simplex couplings (R-2) and original Hornby Dublo (TM) couplings. Moulded in brown plastic to resemble check rails. Can also be used with 0-16.5 track.

For use with the tension lock couplers fitted to Hornby(TM), Bachmann(TM), Dapol(TM) etc. rolling stock on Peco Streamline Track.

Z Gauge Code 60 - Small Scale Flexible Track
A gauge of just 6.5mm and a model scale of 1.5mm/1ft means if you want to model big landscapes where the trains are dwarfed by the scenery and yet keep it to a manageable size, Z gauge could be the answer.

Z Gauge Code 60 - Small Scale Flexible Track
With a gauge of just 6.5mm and a model scale of 1.5mm/1ft, this is currently the smallest practical size for building a working model railway. If you want to model big landscapes where the trains are dwarfed by the scenery and yet keep it to a manageable size, Z gauge could be the answer.

This 12mm gauge track system is accurately modelled in H0 on the metre gauge track found in Europe, most notably in Switzerland. It is also useful for modelling the 3ft 6ins track found in southern Africa, Japan, Australia, Norway and parts of South America; in 4mm scale the gauge is correct for the many 3ft gauge lines formerly found in Ireland and the Isle of Man. This versatile track could also be used for modelling in TT (3mm/ft scale)

This 12mm gauge track system is accurately modelled in H0 on the metre gauge track found in Europe, most notably in Switzerland. It is also useful for modelling the 3ft 6ins track found in southern Africa, Japan, Australia, Norway and parts of South America; in 4mm scale the gauge is correct for the many 3ft gauge lines formerly found in Ireland and the Isle of Man. This versatile track could also be used for modelling in TT (3mm/ft scale)

14mm, chemically blackened mild steel.

These authentic looking rail joiners incorporate bolt detail, and complement the fine scale appearance and detail of our 00 Code 75 Bullhead track range.

For use between sections of Code 100 and Code 75 track, so for example could be used to incorporate a Code 75 Asymmetric 3- way Turnout (SL-E199) into a Code 100 layout, or to connect a Code 100 Streamline or Setrack 'fiddle yard' to a Code 75 scenic section.

Normally conductive; although the electrical connections between the 2 rail types can be cut to provide an electrical break. Supplied in a pack of 4.

Bullhead track has been in use on the railways since the earliest times, and is still very much in evidence today. This flexible track provides a highly detailed and faithful 00 scale replication of this long standing feature of Britain's railways.

Our SL-114 Bullhead Rail Joiners include bolt detail and therefore complement the fine detail of this track range.

Designed to be used with our 00/H0 Code 100 track systems (Ref nos. SL-100 and 102); also with 0 Gauge Bullhead (SL-700BH) and 0-16.5/0n30 (SL-500) track systems.

Kit contains detailed plastic parts, rail and electrical contacts, plus full instructions. It may be assembled as a traditional open well type or with an all-over riveted steel deck, an essential feature in areas subject to heavy snow fall. A motorising kit will be available soon.

1 set of Frog and Wing Rails for the construction of turnouts, using Code 250 Flat Bottom rail.

12 Sleepers approx 125mm long plus 12 end caps for track and turnout construction.

6 914mm lengths of Code 250 Flat Bottom Rail for track and turnout construction.

6 914mm lengths of Code 83 Flat Bottom Rail for track and turnout construction.

6 914mm lengths of Code 200 Bullhead Rail for track and turnout construction.

6 914mm lengths of Code 143 Flat Bottom Rail for track and turnout construction.

6 914mm lengths of Code 124 Bullhead Rail for track and turnout construction.

12 cosmetic fishplates to use at joints between Code 124 and Code 143 rails.

20 175mm lengths of wood grain effect sleepering for track and turnout construction.

50 injection moulded chairs for the construction of turnouts, using Code 143 Flat Bottom rail.

100 injection moulded rail clips on baseplates for the construction of turnouts and plain track, using Code 143 Flat Bottom rail.

1 set of Frog and Wing Rails for the construction of turnouts, using Code 143 Flat Bottom rail.

1 set of Turnout Blades and Brackets for the construction of turnouts, using Code 124 Bullhead rail.

1 set of Frog and Wing Rails for the construction of turnouts, using Code 124 Bullhead rail.

50 injection moulded chairs for the construction of turnouts, using Code 124 Bullhead rail.

100 injection moulded chairs for the construction of turnouts and plain track, using Code 124 Bullhead rail.

Individulay components for building track.

Individulay components for building track.

Individulay components for building track.

Individulay components for building track.