Pack contains 5 standing people for all OO scenes. Each pack contains 5 different characters all hand painted.

Kit of a typical small box, often found on a branch line or controlling a main line yard.

These delightful ready to run coaches are based on those used on the Glyn Valley Tramway. This plain green vehicle is ideal for a modeller who wishes to create their own imaginary narrow gauge line, or for those wishing to adapt them to suit another prototype. A matching open sided coach (Ref. GR-520UR) and enclosed coach (Ref. GR-500UR) are available; all three vehicles are also produced in plain green (Ref GR-500UG, GR-520UG, & GR-530UG).

These delightful ready to run coaches are based on those used on the Glyn Valley Tramway. This plain green vehicle is ideal for a modeller who wishes to create their own imaginary narrow gauge line, or for those wishing to adapt them to suit another prototype. A matching open sided coach (Ref. GR-520UG) and enclosed coach (Ref. GR-500UG) are available; all three vehicles are also produced in plain red (Ref GR-500UR, GR-520UR, & GR-530UR).

These delightful ready to run coaches are based on those used on the Glyn Valley Tramway. This plain red vehicle is ideal for a modeller who wishes to create their own imaginary narrow gauge line, or for those wishing to adapt them to suit another prototype. A matching enclosed coach (Ref. GR-500UR) and a brake coach (Ref. GR-530UR) are available; all three vehicles are also produced in plain green (Ref GR-500UG, GR-520UG, & GR-530UG).

These delightful ready to run coaches are based on those used on the Glyn Valley Tramway. This plain green vehicle is ideal for a modeller who wishes to create their own imaginary narrow gauge line, or for those wishing to adapt them to suit another prototype. A matching enclosed coach (Ref. GR-500UG) and a brake coach (Ref. GR-530UG) are available; all three vehicles are also produced in plain red (Ref GR-500UR, GR-520UR, & GR-530UR).

These delightful ready to run coaches are based on those used on the Glyn Valley Tramway. This plain red vehicle is ideal for a modeller who wishes to create their own imaginary narrow gauge line, or for those wishing to adapt them to suit another prototype. A matching open sided coach (Ref. GR-520UR) and a brake coach (Ref. GR-530UR) are available; all three vehicles are also produced in plain green (Ref GR-500UG, GR-520UG, & GR-530UG).

These delightful ready to run coaches are based on those used on the Glyn Valley Tramway. This plain green vehicle is ideal for a modeller who wishes to create their own imaginary narrow gauge line, or for those wishing to adapt them to suit another prototype. A matching open sided coach (Ref. GR-520UG) and a brake coach (Ref. GR-530UG) are available; all three vehicles are also produced in plain red (Ref GR-500UR, GR-520UR, & GR-530UR).

The purpose of a Catch Turnout is to derail a vehicle before it rolls out of a siding or branch line on to a main line.

Peco Streamline Bullhead 0 Gauge track has set unsurpassed standards for 7mm scale realism. Superbly detailed, its 'wood grain' sleepers are the correct scale width and have integrally moulded scale chairs with square headed fixing bolts and wooden keys.

This range is compatible with the 0 Setrack range; and if, as on the real network, you wish to use a combination of Bullhead and Flat Bottom track the SL-713 Transition Track provides an ideal way to connect the two types.

The purpose of a Catch Turnout is to derail a vehicle before it rolls out of a siding or branch line on to a main line.

Peco Streamline Bullhead 0 Gauge track has set unsurpassed standards for 7mm scale realism. Superbly detailed, its 'wood grain' sleepers are the correct scale width and have integrally moulded scale chairs with square headed fixing bolts and wooden keys.

This range is compatible with the 0 Setrack range; and if, as on the real network, you wish to use a combination of Bullhead and Flat Bottom track the SL-713 Transition Track provides an ideal way to connect the two types.

The 3 way turnout is an ideal way to save space on station approaches, junctions etc.

If you wish to mix wheel standards on your 00/H0 layout, this is the trackage to choose. Code 100 rail allows flange depths up to 1.6mm which means that both vintage and current stock will run happily together.

The wide range of turnouts and crossings in this series includes every type, and the geometry of this range has been cleverly designed to make it easy to build convenient, complex and aesthetically pleasing formations using combinations of small, medium and large radius turnouts and crossings. Layout plans suggestions can be found in our publications ‘Track Plans for Layouts to Suit all Locations’ (Ref PM-202), ‘60 Plans for Small Railways’ (Ref no PB-3), and ‘Track Plans for Various Locations’ (Ref no PB-66).

For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.

The 3 way turnout is an ideal way to save space on station approaches, junctions etc.

If you wish to mix wheel standards on your 00/H0 layout, this is the trackage to choose. Code 100 rail allows flange depths up to 1.6mm which means that both vintage and current stock will run happily together.

The wide range of turnouts and crossings in this series includes every type, and the geometry of this range has been cleverly designed to make it easy to build convenient, complex and aesthetically pleasing formations using combinations of small, medium and large radius turnouts and crossings. Layout plans suggestions can be found in our publications ‘Track Plans for Layouts to Suit all Locations’ (Ref PM-202), ‘60 Plans for Small Railways’ (Ref no PB-3), and ‘Track Plans for Various Locations’ (Ref no PB-66).

Can be extended by adding additional kits and the SS83 Piers, or with the SS81 Extra Arch and Pier. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 423mm Long, 124mm Wide and 234mm High.

These finely moulded plastic wagon kits come complete with pin point axle wheels. Glue and paint will be required, along with appropriate transfers.

With its fine scale latticework and curved section roof, this typical footbridge will add interest and a sense of importance to any model station.The versatile kit design means that the stairs can be assembled to face in either direction or straight off the end of the bridge. Additional kits can be used to create multiple spans, whilst larger, busier stations often had 2 stairways to each platform, leading off in both directions. Could also be used without the roof sections at a large terminus under an overall station canopy. Supplied with pre-coloured parts although painting and/or weathering (See the Pecoscene Weathering Powder range PS-360 - 365) can add realism; glue is required to complete this model. Span: 180mm

These towers are an impressive sight and were an essential feature on mainline railways. The Pecoscene ranges provide the perfect loading material, Real Coal (PS-330 -332), Limestone (PS-342 and 3), Sand (PS-344), Iron Ore (PS-340), Grey Stone (PS-300- 307), and Brown Stone (PS-310 - 317) for a quarry, mine or pit loading hopper. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint: 116mm x 92mm, Height 181mm

The essential items for all stations until recently was a goods shed. Inside, dry goods were stored and transhipped from road to rail via the internal platform. The shed usually had a crane (Ref 531) or hoist (Ref 543) inside, whilst pallets and sacks (Ref 514) would be seen stacked around the site. A good example of this type of goods shed can still be seen standing in Ross on Wye, long after the railway has disappeared. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 155mm x 170mm

This kit is modelled on the Midland Railway standard 4d box with characteristic hipped roof, and is based on the prototype at Swadlincote Junction, Leics. This timeless design lasted right up to the demise of mechanical signalling. The Ratio Signal Box Interior kit 553 will provide a wealth of interior detail. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 130mm x 50mm.

The kit comprises a coaling stage, water tower with crane, and a hoist for loading the coal. This model and the Engine Shed kit (Ref 522) make a good starting point for any layout in need of steam engine facilities. The Pecoscene Real Coal range (PS-330 -332) provides the perfect addition, as do the Pecoscene Ash and Cinder Scatter Materials (PS-320 - 322). An Inspection Pit (Peco LK-56/156) was also a common feature. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder PS-362 Coal Dust); glue is required to complete this model. Footprint: 140mm x 80mm

These were a common feature in sidings where repairs, cleaning and maintenance were effected. This shed will cover 2 tracks and can easily be extended; the kit includes guttering and centre walkway. A versatile kit with many uses both on and off the railway. Glue and paints required to complete model. Footprint 320mm x 105mm.

A model of the station at Castle Cary, Somerset. Although of typically GWR design, it can be adapted to suit that of other railway companies. The kit includes notice boards, telephone and first aid boxes. See also Modelscene Station Staff 5059, Passengers Standing Sets A and B 5057 and 5058 and Passengers Seated Ref. 5056. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 210mm x 135mm (inc. canopy)

Trains of slate wagons used to be gravity run from the quarries at Blaenau Ffestiniog to the harbour at Porthmadoc, this model pack of 3 ready to run wagons includes 1 braked vehicle and removable slate loads which are conveniently hollow, thus giving the modeller the added option of including some further weight if required.
Roughly one in five wagons was fitted with brakes. These were spread throughout the train and turned so the brake handles were all on the same side of the train, pointing towards Porthmadog. Different colours painted on the side bars denoted the various slate quarry companies; our packs feature random selections of these. As these wagons tend to run in long rakes, the models have semi-permanent close-couplings fitted in their NEM pockets. These can be pulled out with fine nosed pliers and replaced with conventional OO-9 hoop-and-loop couplings (supplied) at each end of the rake.

Trains of slate wagons used to be gravity run from the quarries at Blaenau Ffestiniog to the harbour at Porthmadoc, this model pack is of 3 unbraked vehicles and has removable slate loads which are conveniently hollow, thus giving the modeller the added option of including some further weight if required.
Roughly one in five wagons was fitted with brakes. These were spread throughout the train and turned so the brake handles were all on the same side of the train, pointing towards Porthmadog. Different colours painted on the side bars denoted the various slate quarry companies; our packs feature random selections of these. As these wagons tend to run in long rakes, the models have semi-permanent close-couplings fitted in their NEM pockets. These can be pulled out with fine nosed pliers and replaced with conventional OO-9 hoop-and-loop couplings (supplied) at each end of the rake.

We have teamed up with DPD to produce this new modular kit in the Wills Modern range, replicating a typical local depot that might be found on industrial estates across the country, and quite possibly adjacent to the railway.

The modeller can choose where to place doors and windows, and whether to build as a stand-alone structure or as a low-relief backdrop. This kit is supplied with a fully detailed printed interior, so modellers can construct the building with doors and shutters open if they wish. There is even an office scene for the windows! The kit is also supplied with coloured parts, meaning that painting, whilst desirable for full authenticity, is not essential.