The PECO Streamline OO Bullhead track range has shaped up to be a very comprehensive system comprising flexible track, bullhead joiners, buffer stop, large radius and medium radius turnouts , a crossing and two slips. There's enough there already for modellers to build a truly authentic steam to diesel transition period layout.

This track models the most common form of concrete sleepering in use in Britain today, with flat bottom rail. PECO Streamline O Gauge Code 143 - Concrete Flexible Track.

SL-702FB PECO Streamline O Code 143 Flexible Track & Concrete SleeperTie

Flat bottom rail, 914mm, 3ft length / Nickel silver rail

View the film here: 

Adapted from the existing PECO Setrack Curved turnout, this brand new development allows us to add a really useful component into the classic Streamline OO/HO Code 100 range. At last we are able to offer a tighter radius turnout for Streamline users, something that has been requested on and off for a long time. 

Curved turnouts are fantastic space savers and their benefits are often overlooked. Given that so many layouts are built to be located in small spaces the use of curved turnouts ought to be greater than it is, so these new Streamline turnouts may well address many concerns that modellers have when planning their model railway.

This turnout has been derived from the existing Setrack curved turnout the geometry departs from the common frog angle adopted by the Streamline system (which is based on a common frog angle of 12 degrees) - this turnout has a 11.25 degree frog angle and the inner radius is just 438mm, or 17.2 inches. This should not be seen as any disadvantage and the real benefit is that they will allow much tighter access where it is needed, such as in restricted places where a layout has to loop around into a fiddle yard, for example.  The standard Streamline curved turnout has a minimum inside radius of 762mm, 30 inches, so the difference is quite clear to see.

Adapted from the existing PECO Setrack Curved turnout, this brand new development allows us to add a really useful component into the classic Streamline OO/HO Code 100 range. At last we are able to offer a tighter radius turnout for Streamline users, something that has been requested on and off for a long time. 

Curved turnouts are fantastic space savers and their benefits are often overlooked. Given that so many layouts are built to be located in small spaces the use of curved turnouts ought to be greater than it is, so these new Streamline turnouts may well address many concerns that modellers have when planning their model railway.

This turnout has been derived from the existing Setrack curved turnout the geometry departs from the common frog angle adopted by the Streamline system (which is based on a common frog angle of 12 degrees) - this turnout has a 11.25 degree frog angle and the inner radius is just 438mm, or 17.2 inches. This should not be seen as any disadvantage and the real benefit is that they will allow much tighter access where it is needed, such as in restricted places where a layout has to loop around into a fiddle yard, for example.  The standard Streamline curved turnout has a minimum inside radius of 762mm, 30 inches, so the difference is quite clear to see.

Railway companies all had a stock of their own vehicles for carrying goods and merchandise around their network, and also onto other companies' routes as and when required. These were integrated into British Railways at Nationalisation; some of them to be once more re liveried under sectorisation as the network was prepared to be returned to private ownership. All Peco wagons feature free running wheels in pin point axles. The ELC coupling, whilst compatible with the standard N gauge couplings, keeps a realistic distance between the vehicles and enables the PL-25 electro magnetic decoupler to be used for remote uncoupling.

This 5-Plank Teign Valley granite wagon of Bovey Tracey is produced from our all-new tooling, featuring a red body with white lettering, shaded black, and black ironwork. Running on our new metal-tyred wheels these wagons, like the others, are very free-wheeling and a colourful addition to the expanding range. 

Monkton Combe, once an intermediate station on the long-closed Camerton branch near Bath, was thrust into the limelight in 1952 when it was chosen to be the location for the filming of the famous Ealing Comedy "The TitfieldThunderbolt". 

Private owner wagons abounded prior to nationalisation, they would often be seen far from their base as they were sent to collect raw materials and supplies such as coal, and deliver finished goods. All Peco wagons feature free running wheels in pin point axles. The ELC coupling, whilst compatible with the standard N gauge couplings, keeps a realistic distance between vehicles and enables the PL-25 electro magnetic decoupler to be used for remote uncoupling. This model is produced from new tooling and features, amongst many things, a much finer and thinner body moulding, including interior detail, with accurately-placed brake rigging and brake shoes (in line with wheels), fine printing detail and metal-tyred wheels.

NEW limited edition N gauge iron ore tippler, celebrating the coronation of His Majesty the King on 6th May. Our designers have come up with a very eye-catching livery for both models, incorporating the official logo for this historical event. All PECO wagons feature free running wheels in pin point axles. The ELC coupling, whilst compatible with the standard N gauge couplings, keeps a realistic distance between the vehicles and enables the PL-25 electro magnetic decoupler to be used for remote uncoupling.

The first batch of our all-new N Scale 7-plank open wagons are now available. The models have been brought right up to date, which will please N scale modellers everywhere. These initial five new releases are just the beginning. We have a number of private owner liveries to introduce over the coming months. But to start we have the core models representing wagons belonging to the "Big Four" railway companies, plus of course good old British Railways.

The first batch of our all-new N Scale 7-plank open wagons are now available. The models have been brought right up to date, which will please N scale modellers everywhere. These initial five new releases are just the beginning. We have a number of private owner liveries to introduce over the coming months. But to start we have the core models representing wagons belonging to the "Big Four" railway companies, plus of course good old British Railways.

The first batch of our all-new N Scale 7-plank open wagons are now available. The models have been brought right up to date, which will please N scale modellers everywhere. These initial five new releases are just the beginning. We have a number of private owner liveries to introduce over the coming months. But to start we have the core models representing wagons belonging to the "Big Four" railway companies, plus of course good old British Railways.

The first batch of our all-new N Scale 7-plank open wagons are now available. The models have been brought right up to date, which will please N scale modellers everywhere. These initial five new releases are just the beginning. We have a number of private owner liveries to introduce over the coming months. But to start we have the core models representing wagons belonging to the "Big Four" railway companies, plus of course good old British Railways.

The first batch of our all-new N Scale 7-plank open wagons are now available. The models have been brought right up to date, which will please N scale modellers everywhere. These initial five new releases are just the beginning. We have a number of private owner liveries to introduce over the coming months. But to start we have the core models representing wagons belonging to the "Big Four" railway companies, plus of course good old British Railways.

The first batch of our all-new N Scale 7-plank open wagons are now available. The models have been brought right up to date, which will please N scale modellers everywhere. These initial five new releases are just the beginning. We have a number of private owner liveries to introduce over the coming months. But to start we have the core models representing wagons belonging to the "Big Four" railway companies, plus of course good old British Railways.

Peco Setrack Bullhead 0 Gauge track makes it possible have somewhere to run trains without having to build or find room for a fixed layout. With Setrack you can lay out your trackwork indoors on the floor or out on the patio in any configuration you choose and pack it away again afterwards. Compatible with and made to the same high standard of detail and realism as the Bullhead Streamline range, it can also be incorporated into a Streamline layout without problems. Made with solid nickel silver rail to the classic bullhead section and check rail are also machined from solid rail. The SL-713 0 Gauge Bullhead to Flat Bottom Transition Track makes it easy to also incorporate the Setrack range into a layout using Flat Bottom track.

PECO Setrack Bullhead O Gauge track makes it possible have somewhere to run trains without having to build or find room for a fixed layout. With Setrack you can lay out your trackwork indoors on the floor or out on the patio in any configuration you choose and pack it away again afterwards. Compatible with and made to the same high standard of detail and realism as the Bullhead Streamline range, it can also be incorporated into a Streamline layout without problems. Made with solid nickel silver rail to the classic bullhead section and check rail are also machined from solid rail. The SL-713 O Gauge Bullhead to Flat Bottom Transition Track makes it easy to also incorporate the Setrack range into a layout using Flat Bottom track.

Bullhead track has been in use on the railways since the earliest times, and is still very much in evidence today. These superb turnouts give an authentic 00 scale look to your layout, and feature metal check rails and prototypical machined turnout blades.

Another feature of these turnouts is that both routes remain electrically live, making them ideal for DCC operation. They are constructed to our new versatile Unifrog design which can be operated, powered and switched like an Electrofrog or left unpowered if preferred.

Peco Streamline Code 75 track meets the standards of enthusiasts who prefer to run trains on scale height rail. Today most manufacturers' wheels are suitable for use on Code 75 track but some vintage models may have flanges which are too deep to clear the rail fixings. Code 75 can be easily combined with code 100 track by using the SL-113 Transition Track.

Bullhead track has been in use on the railways since the earliest times, and is still very much in evidence today. These superb turnouts give an authentic 00 scale look to your layout, and feature metal check rails and prototypical machined turnout blades.

Another feature of these turnouts is that both routes remain electrically live, making them ideal for DCC operation. They are constructed to our new versatile Unifrog design which can be operated, powered and switched like an Electrofrog or left unpowered if preferred.

Peco Streamline Code 75 track meets the standards of enthusiasts who prefer to run trains on scale height rail. Today most manufacturers' wheels are suitable for use on Code 75 track but some vintage models may have flanges which are too deep to clear the rail fixings. Code 75 can be easily combined with code 100 track by using the SL-113 Transition Track.

Bullhead track has been in use on the railways since the earliest times, and is still very much in evidence today. These superb turnouts give an authentic 00 scale look to your layout, and feature metal check rails and prototypical machined turnout blades.

Another feature of these turnouts is that both routes remain electrically live, making them ideal for DCC operation. They are constructed to our new versatile Unifrog design which can be operated, powered and switched like an Electrofrog or left unpowered if preferred.

Peco Streamline Code 75 track meets the standards of enthusiasts who prefer to run trains on scale height rail. Today most manufacturers' wheels are suitable for use on Code 75 track but some vintage models may have flanges which are too deep to clear the rail fixings. Code 75 can be easily combined with code 100 track by using the SL-113 Transition Track.

A craft knife, files and liquid poly cement are required to for assembly

Use with LK-12103 and LK-12104 platform edging and LK-12105 and LK-12106 platform ramp edges.

The TT:120 platform system comprises a variety of styles of platform edging, ramp edges and surfaces that can be used to create platforms of any size and shape. Platform edging designed for use alongside PECO TT:120 track and considers the height of the sleepers, resulting in an accurate platform 3 scale feet from the railhead. The platform surface sheets can also be used for scratch building structures and buildings.

Technical Specifications

5 sheets 133m x 76mm, nominally 1mm thick.

A craft knife, files and liquid poly cement are required to for assembly

Use with LK-12103 and LK-12104 platform edging and LK-12105 and LK-12106 platform ramp edges.

The TT:120 platform system comprises a variety of styles of platform edging, ramp edges and surfaces that can be used to create platforms of any size and shape. Platform edging designed for use alongside PECO TT:120 track and considers the height of the sleepers, resulting in an accurate platform 3 scale feet from the railhead. The platform surface sheets can also be used for scratch building structures and buildings.

Technical Specifications

5 sheets 133m x 76mm, nominally 1mm thick.

A craft knife, files and liquid poly cement are required to for assembly

Use with LK-12104 Stone platform edges and LK-12107 Brick paviours or LK-12108 concrete surface.

The TT:120 platform system comprises a variety of styles of platform edging, ramp edges and surfaces that can be used to create platforms of any size and shape. Platform edging designed for use alongside PECO TT:120 track and considers the height of the sleepers, resulting in an accurate platform 3 scale feet from the railhead.

Technical Specifications

2 handed pairs, each ramp 75mm long

A craft knife, files and liquid poly cement are required to for assembly

Use with LK-12103 Brick platform edges and LK-12107 Brick paviours or LK-12108 concrete surface.

The TT:120 platform system comprises a variety of styles of platform edging, ramp edges and surfaces that can be used to create platforms of any size and shape. Platform edging designed for use alongside PECO TT:120 track and considers the height of the sleepers, resulting in an accurate platform 3 scale feet from the railhead.

Technical Specifications

2 handed pairs, each ramp 75mm long