Laser cut wooden kit with plastic chimney pot detail and glazing sheet.

A craft knife, needle files, glue (impact adhesive or PVA work well. Superglue can also be used apart from the glazing) and paints are required.

Stone-built country station building with canopy on the platform side. Based on West Bay in Dorset, originally built by the Bridport Railway and later absorbed by the Great Western Railway.

Technical Specifications

Length 115mm

Width 47mm Canopy projects 17mm

Laser cut wooden kit with plastic chimney pot detail and glazing sheet.

A craft knife, needle files, glue (impact adhesive or PVA work well. Superglue can also be used apart from the glazing) and paints are required.

A signalbox suitable for a small country station, based on Highley on the Severn Valley Railway (with thanks to the SVR for allowing access to measure it).

Technical Specifications

Length 65mm (including steps)

Width 32mm

Supplied in a square-section tube, the three separate sheets will match perfectly together to form a continuous run of 2400mm (95in), and reaching to a height of 333mm (13in). Future backscenes will match at either end allowing longer runs of scenery throughout the full length of a layout.

Supplied in a square-section tube, the three separate sheets will match perfectly together to form a continuous run of 2400mm (95in), and reaching to a height of 333mm (13in). Future backscenes will match at either end allowing longer runs of scenery throughout the full length of a layout.

Supplied in a square-section tube, the three separate sheets will match perfectly together to form a continuous run of 2400mm (95in), and reaching to a height of 333mm (13in). Future backscenes will match at either end allowing longer runs of scenery throughout the full length of a layout.

Supplied in a square-section tube, the three separate sheets will match perfectly together to form a continuous run of 2400mm (95in), and reaching to a height of 333mm (13in). Future backscenes will match at either end allowing longer runs of scenery throughout the full length of a layout.

A accurately laser cut wood kit supplemented by injection moulded roof. Glue and paints required to complete model.

Kit to produce dirty track bed on your ballasted track areas to represent weathering, dirt and oily grime between the rails at stations, at points, signal areas and engine maintenance depots. This kit is specially designed for layouts using diesel locomotives.

Kit to produce dirty track bed on your ballasted track areas to represent weathering, dirt and oily grime between the rails at stations, at points, signal areas and engine maintenance depots. This kit is specially designed for layouts using steam locomotives.

A kit containing common objects found in any signal box, such as the comfy leather armchair, stove, token machines, desk, a shelf with various rule books lined up, a phone, a clock, and the most important items, the kettle and mug of tea.

Kit of a typical small box, often found on a branch line or controlling a main line yard.

Based on a design of call box introduced from the 1920s, in real life they contained a phone for use by the public in an emergency, and police officers could use them as miniature police stations, with facilities inside for compiling reports, taking lunch breaks and even temporarily holding suspects until assistance arrived!

This is a nice and simple kit to assemble, moulded in appropriately-coloured dark blue, and supplied with waterslide decals to complete the details.

10 6mm high self adhesive Water Meadow Grass tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.

10 6mm high self adhesive Marshland Grass tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.

10 6mm high self adhesive Wild Meadow Grass tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.

10 6mm high self adhesive Winter Grass tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.

10 6mm high self adhesive Spring Grass tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.

10 6mm high self adhesive lavender tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.

10 4mm high self adhesive wild meadow tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.

10 4mm high self adhesive daffodil tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.

The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. The Static Grass Applicators PSG-1 and 2 electrostatically charge the grass filaments so that they stand vertically, regardless of the terrain. Mixing various lengths and colours of grasses can produce highly realistic textures and effects. Our Shows You How Booklet No 13 Detailing the Landscape and Youtube video clips show the effects that can be created.

The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. The Static Grass Applicators PSG-1 and 2 electrostatically charge the grass filaments so that they stand vertically, regardless of the terrain. Mixing various lengths and colours of grasses can produce highly realistic textures and effects. Our Shows You How Booklet No 13 Detailing the Landscape and Youtube video clips show the effects that can be created.

The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. The Static Grass Applicators PSG-1 and 2 electrostatically charge the grass filaments so that they stand vertically, regardless of the terrain. Mixing various lengths and colours of grasses can produce highly realistic textures and effects. Our Shows You How Booklet No 13 Detailing the Landscape and Youtube video clips show the effects that can be created.

The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. The Static Grass Applicators PSG-1 and 2 electrostatically charge the grass filaments so that they stand vertically, regardless of the terrain. Mixing various lengths and colours of grasses can produce highly realistic textures and effects. Our Shows You How Booklet No 13 Detailing the Landscape and Youtube video clips show the effects that can be created.

The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. The Static Grass Applicators PSG-1 and 2 electrostatically charge the grass filaments so that they stand vertically, regardless of the terrain. Mixing various lengths and colours of grasses can produce highly realistic textures and effects. Our Shows You How Booklet No 13 Detailing the Landscape and Youtube video clips show the effects that can be created.

The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. The Static Grass Applicators PSG-1 and 2 electrostatically charge the grass filaments so that they stand vertically, regardless of the terrain. Mixing various lengths and colours of grasses can produce highly realistic textures and effects. Our Shows You How Booklet No 13 Detailing the Landscape and Youtube video clips show the effects that can be created.

Modern type crossing barriers complete with dummy light standards. Can be used with the Peco N Setrack Level Crossings ST-20/21.

A detailed kit for a classic and very long lived semaphore signal

Set of six.

An essential piece of equipment that was placed near the exit from every goods yard, along with a catch turnout, signal etc.

Kit of a useful general purpose type crane, also often seen at canal basins etc.

Single moulding, no assembly required.

6 assorted cases

Often seen in the loco yard or near the platform end. Use LK-2 Water Cranes if additional cranes are required.

The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. The Static Grass Applicators PSG-1, 2 and 3 electrostatically charge the grass filaments so that they stand vertically, regardless of the terrain. The PSG-1 applicator is designed for creating medium to large areas, such as lawns, fields, moorlands etc. Mixing various lengths and colours of grasses can produce highly realistic textures and effects. Our Shows You How Booklet No 13 Detailing the Landscape and Youtube video clips show the effects that can be created.

Traditional wooden type gates (complete with separate pedestrian access gates), giving double track spacing when closed across railway tracks.

Kit for single track level crossing gates.

Pioneered by the Southern Railway but since seen almost everywhere.

Modular design, makes it easy to assemble pits of any required length. A great addition to the LK-80 Modern Train Shed unit or create a modern diesel/EMU servicing shed using the Wills SSM300 Modern Industrial Building and SSM315 Extension kits.

Kit of a useful general purpose type crane, also often seen at canal basins etc.

24 Churns, once a common site on station platforms.

This model platform system is ideal for use with Peco N Setrack, Streamline and any other unit trackage system which conforms to the same geometry. The two sections in this pack make a 288mm long platform plus ramps; it can easily be extended by simply clipping in additional ST-94 Stone type platform units. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of three widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the Setrack curve.

Pack contains two 144mm long platform units that simply clip to the ST-91 Stone Type Complete Platform system to make a longer platform.As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of three widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the Setrack curve. See our Useful Guides Section for publications that will give you tips, instruction and inspiration on building a great model railway.

Pack contains two 144mm long platform units that simply clip to the ST-90 Complete Brick Type Platform system to make a longer platform. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of three widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the Setrack curve. See our Useful Guides Section for publications that will give you tips, instruction and inspiration on building a great model railway.

This model platform system is ideal for use with Peco N Setrack, Streamline and any other unit trackage system which conforms to the same geometry. The two sections in this pack make a 288mm long platform plus ramps; it can easily be extended by simply clipping in additional ST-93 Brick type platform units. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of three widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the Setrack curve.

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range depicts the slightly worn out old track of a picturesque old railway. It is fully compatible with the Peco 009 Setrack rigid track system. This cosmetic turnout lever will add realism to your station yards and sidings.

Moulded foam ballast inlay in a realistic brown colour. Moulded units fit Turnouts and Crossings, and rolls are available for plain track (Streamline and Setrack). This inlay system adds extra realism as well as giving quieter, smoother running. Suitable for Code 80 and Code 55 track.

A one piece moulding that adds scenic realism to turnouts (6 per pack)