Lineside/Scenic

Tile Roofing

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm

Timber Island Platform Station Building

This Island Platform building is designed to be used with the Wills SS61 Platform and SS54 Canopy, and can easily be adapted to make a larger building using additional kits.Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 92mm x 60mm.

Timber Yard

Timber yards and Builders merchants premises offer possibilities of extra variety of traffic into the station goods yard. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Tongue and Groove Boarding

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

Track Bed Weathering Kit - Diesel

Kit to produce dirty track bed on your ballasted track areas to represent weathering, dirt and oily grime between the rails at stations, at points, signal areas and engine maintenance depots. This kit is specially designed for layouts using diesel locomotives.

Track Bed Weathering Kit - Steam

Kit to produce dirty track bed on your ballasted track areas to represent weathering, dirt and oily grime between the rails at stations, at points, signal areas and engine maintenance depots. This kit is specially designed for layouts using steam locomotives.

Track Maintenance Party

Fully painted figures to depict a permanent way team. See Modelscene 5002 Ballast Bins; Lineside Hut Kits Ratio Ref. 511 and 518, also Wills Ref. SS50.

Track Signs

Pack contains 3 Track Signs

Traditional Ale Casks

Can be used vertically or horizontally, singly or in pairs placed back to back.
Size approx (mm) L51 x W21 x H23. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Traditional Signal Box, Brick/Timber Type

Modelled on the Saxby and Farmer design that was to be found around the country, this kit can be combined with further kits to make a larger signal box if required. Use the Ratio Signal Box Interior kit No. 224 for a 20 lever frame, level crossing wheel and other detail.

Traffic Cones

Pack contains 20 assorted Traffic Cones

Traffic Island, Keep Left 1960's

Size approx (mm) 12 x 14 x 17 The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Train Shed/Locomotive Depot/Engine Shed

Kit consists of parts to build one complete Train Shed Unit which will span two tracks, and can be combined with further units to build a larger facility if required. Inspection pits were often placed in the tracks in these buildings (See LK-56/156). Easily adapted to create a modern building for non railway use.

Traversing Crane

From the late 1960's the spread of shipping containers revolutionised the transport of goods. On the railways marshalling yards gave way to intermodal depots as containers are transferred between ships, trains and road vehicles. The Rolling Underframe kit (Ref 546A) can be added to transform this unit into a movable crane. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint; Sides 61mm wide X 125mm High, Span 153mm

Tree Encircled by Flowers

A neat, colourful and decorative item which will enhance any area in need of some colour. The inspiration for these models came from Glasgow's Queen Street station platforms where they were seen to good effect.
Size (mm) Dia14 x H24. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Tree Trunks, Bound

Place near old woodland or put on bogie bolster wagons.
Size (mm) 123 x 33 x 20. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Trespass and Board Signs

Pack contains 5 signs with stick on notices.

Trunks, Suitcases and Trolley 'Sack Truck'

Pack contains 4 Trunks, 6 Suitcases, and 2 Sack Trucks to add detail to your station platform.

Truss Girder Bridge Side

Can be used with Wills SS83 Stone Piers to create an impressive viaduct as seen on many railways around the world. Detailed plastic moulding supplied 2 in a pack.

TT:120 Country Station Kit

Laser cut wooden kit with plastic chimney pot detail and glazing sheet.

A craft knife, needle files, glue (impact adhesive or PVA work well. Superglue can also be used apart from the glazing) and paints are required.

Stone-built country station building with canopy on the platform side. Based on West Bay in Dorset, originally built by the Bridport Railway and later absorbed by the Great Western Railway.

Technical Specifications

Length 115mm

Width 47mm Canopy projects 17mm

TT:120 GWR Goods Shed Kit

Laser cut wooden kit with plastic chimney pot detail and glazing sheet.

A craft knife, needle files, glue (impact adhesive or PVA work well. Superglue can also be used apart from the glazing) and paints are required.

Designed to fit over PECO TT:120 track (not included).

Small goods shed with siding running through it, based on Bovey in South Devon. The doors can be fixed in either open or closed position and the interior features detailed stonework, roof rafters, loading platform and goods office.

Technical Specifications

Length 100mm

Width 110mm

TT:120 GWR Signal Box Kit

Laser cut wooden kit with plastic chimney pot detail and glazing sheet.

A craft knife, needle files, glue (impact adhesive or PVA work well. Superglue can also be used apart from the glazing) and paints are required.

A signalbox suitable for a small country station, based on Highley on the Severn Valley Railway (with thanks to the SVR for allowing access to measure it).

Technical Specifications

Length 65mm (including steps)

Width 32mm

TT:120 Kit GWR Bracket Signal

Based on the familiar style of the Great Western Railway, these non-working plastic kits include pre-painted semaphore arms, an etched metal ladder and separate coloured spectacles for the signal arms themselves. Home/starter variants can be created from the LK12141, or both a home and distant signal on the one post. The fine mouldings, once assembled and painted, create a lovely, characterful model of these iconic signals.

TT:120 Kit GWR Home/Distant Signal Arm Signal

Based on the familiar style of the Great Western Railway, these non-working plastic kits include pre-painted semaphore arms, an etched metal ladder and separate coloured spectacles for the signal arms themselves. Home/starter variants can be created from the LK12141, or both a home and distant signal on the one post. The fine mouldings, once assembled and painted, create a lovely, characterful model of these iconic signals.

TT:120 Kit GWR Joint Home/Distant Signal

Based on the familiar style of the Great Western Railway, these non-working plastic kits include pre-painted semaphore arms, an etched metal ladder and separate coloured spectacles for the signal arms themselves. Home/starter variants can be created from the LK12141, or both a home and distant signal on the one post. The fine mouldings, once assembled and painted, create a lovely, characterful model of these iconic signals.

TT:120 Lineside Hut

Laser cut wooden kit with plastic chimney pot detail.

A craft knife, needle files, glue (impact adhesive or PVA work well. Superglue can also be used apart from the glazing) and paints are required.

The lineside hut kits contains¬†components for two buildings. Carefully designed and thought through, these kits are a delight to build.

¬†