Kit consists of parts to build one complete Train Shed Unit which will span two tracks, and can be combined with further units to build a larger facility if required. Inspection pits were often placed in the tracks in these buildings (See LK-56/156). Easily adapted to create a modern building for non railway use.

Can be used with Wills SS83 Stone Piers to create an impressive viaduct as seen on many railways around the world. Detailed plastic moulding supplied 2 in a pack.

Laser cut wooden kit with plastic chimney pot detail and glazing sheet.

A craft knife, needle files, glue (impact adhesive or PVA work well. Superglue can also be used apart from the glazing) and paints are required.

Stone-built country station building with canopy on the platform side. Based on West Bay in Dorset, originally built by the Bridport Railway and later absorbed by the Great Western Railway.

Technical Specifications

Length 115mm

Width 47mm Canopy projects 17mm

Laser cut wooden kit with plastic chimney pot detail and glazing sheet.

A craft knife, needle files, glue (impact adhesive or PVA work well. Superglue can also be used apart from the glazing) and paints are required.

Designed to fit over PECO TT:120 track (not included).

Small goods shed with siding running through it, based on Bovey in South Devon. The doors can be fixed in either open or closed position and the interior features detailed stonework, roof rafters, loading platform and goods office.

Technical Specifications

Length 100mm

Width 110mm

Laser cut wooden kit with plastic chimney pot detail and glazing sheet.

A craft knife, needle files, glue (impact adhesive or PVA work well. Superglue can also be used apart from the glazing) and paints are required.

A signalbox suitable for a small country station, based on Highley on the Severn Valley Railway (with thanks to the SVR for allowing access to measure it).

Technical Specifications

Length 65mm (including steps)

Width 32mm

Laser cut wooden kit with plastic chimney pot detail.

A craft knife, needle files, glue (impact adhesive or PVA work well. Superglue can also be used apart from the glazing) and paints are required.

The lineside hut kits contains components for two buildings. Carefully designed and thought through, these kits are a delight to build.

 

A craft knife, files and liquid poly cement are required to for assembly

Use with LK-12103 and LK-12104 platform edging and LK-12105 and LK-12106 platform ramp edges.

The TT:120 platform system comprises a variety of styles of platform edging, ramp edges and surfaces that can be used to create platforms of any size and shape. Platform edging designed for use alongside PECO TT:120 track and considers the height of the sleepers, resulting in an accurate platform 3 scale feet from the railhead. The platform surface sheets can also be used for scratch building structures and buildings.

Technical Specifications

5 sheets 133m x 76mm, nominally 1mm thick.

A craft knife, files and liquid poly cement are required to for assembly

Use with LK-12103 and LK-12104 platform edging and LK-12105 and LK-12106 platform ramp edges.

The TT:120 platform system comprises a variety of styles of platform edging, ramp edges and surfaces that can be used to create platforms of any size and shape. Platform edging designed for use alongside PECO TT:120 track and considers the height of the sleepers, resulting in an accurate platform 3 scale feet from the railhead. The platform surface sheets can also be used for scratch building structures and buildings.

Technical Specifications

5 sheets 133m x 76mm, nominally 1mm thick.

A craft knife, files and liquid poly cement are required to for assembly

Use with LK-12103 Brick platform edges and LK-12107 Brick paviours or LK-12108 concrete surface.

The TT:120 platform system comprises a variety of styles of platform edging, ramp edges and surfaces that can be used to create platforms of any size and shape. Platform edging designed for use alongside PECO TT:120 track and considers the height of the sleepers, resulting in an accurate platform 3 scale feet from the railhead.

Technical Specifications

2 handed pairs, each ramp 75mm long

A craft knife, files and liquid poly cement are required to for assembly

Use with LK-12106 Stone ramps and LK-12107 Brick paviours or LK-12108 concrete surface.

The TT:120 platform system comprises a variety of styles of platform edging, ramp edges and surfaces that can be used to create platforms of any size and shape. Platform edging designed for use alongside PECO TT:120 track and considers the height of the sleepers, resulting in an accurate platform 3 scale feet from the railhead.

Technical Specifications

6 pieces, each 133mm long

A craft knife, files and liquid poly cement are required to for assembly

Use with LK-12103 Brick platform edges and LK-12107 Brick paviours or LK-12108 concrete surface.

The TT:120 platform system comprises a variety of styles of platform edging, ramp edges and surfaces that can be used to create platforms of any size and shape. Platform edging designed for use alongside PECO TT:120 track and considers the height of the sleepers, resulting in an accurate platform 3 scale feet from the railhead.

Technical Specifications

2 handed pairs, each ramp 75mm long

A craft knife, files and liquid poly cement are required to for assembly

Use with LK-12104 Stone platform edges and LK-12107 Brick paviours or LK-12108 concrete surface.

The TT:120 platform system comprises a variety of styles of platform edging, ramp edges and surfaces that can be used to create platforms of any size and shape. Platform edging designed for use alongside PECO TT:120 track and considers the height of the sleepers, resulting in an accurate platform 3 scale feet from the railhead.

Technical Specifications

2 handed pairs, each ramp 75mm long

The NEW TT:120 Laser-Cut Wooden Platform Shelter.

A craft knife, needle files, glue (impact adhesive or PVA work well. Superglue can also be used apart from the glazing) and paints are required.

The platform shelter model replicates a typical style constructed, appropriately, in wood.

Pair of detailed Tunnel Mouths, with separate wings walls for optional positioning. Matching Stone Walling is also available (NB-40).

Pair of detailed Tunnel Mouths, with separate wings walls for optional positioning. Matching Stone Walling is also available (NB-40).

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range depicts the slightly worn out old track of a picturesque old railway. It is fully compatible with the Peco 009 Setrack rigid track system. This cosmetic turnout lever will add realism to your station yards and sidings.

Kit contains detailed plastic parts, rail and electrical contacts, plus full instructions. A motorising kit will be available soon.

This easily assembled kit makes a model of a hand operated American turntable. It can be used with either Code 100 or Code 75 track. As supplied it is hand operated, but a motorising kit will be available soon. Full instructions supplied.

This easily assembled kit makes a model of a Ransome and Rapier well type turntable. It can be used with either Code 100 or Code 75 track. As supplied it is hand operated, but a motorising kit will be available soon. Full instructions supplied.

All kits comprise a bag of load material, such as coal or sand, plus sections of board that are cut to size to fit the desired wagon. The modeller, using a PVA adhesive, secures the materials on the cut boards and places the load inside the wagon for instant effect. The additional benefit, apart from the realism, is that some valuable weight is added to what might otherwise be a very light vehicle. Especially useful in an N scale wagon!

The N scale kits contain enough material for up to 6 wagons. Full instructions are provided in the packs.

All kits comprise a bag of load material, such as coal or sand, plus sections of board that are cut to size to fit the desired wagon. The modeller, using a PVA adhesive, secures the materials on the cut boards and places the load inside the wagon for instant effect. The additional benefit, apart from the realism, is that some valuable weight is added to what might otherwise be a very light vehicle. Especially useful in an N scale wagon!

The N scale kits contain enough material for up to 6 wagons. Full instructions are provided in the packs.

All kits comprise a bag of load material, such as coal or sand, plus sections of board that are cut to size to fit the desired wagon. The modeller, using a PVA adhesive, secures the materials on the cut boards and places the load inside the wagon for instant effect. The additional benefit, apart from the realism, is that some valuable weight is added to what might otherwise be a very light vehicle. Especially useful in an N scale wagon!

The N scale kits contain enough material for up to 6 wagons. Full instructions are provided in the packs.

All kits comprise a bag of load material, such as coal or sand, plus sections of board that are cut to size to fit the desired wagon. The modeller, using a PVA adhesive, secures the materials on the cut boards and places the load inside the wagon for instant effect. The additional benefit, apart from the realism, is that some valuable weight is added to what might otherwise be a very light vehicle. Especially useful in an N scale wagon!

The N scale kits contain enough material for up to 6 wagons. Full instructions are provided in the packs.

All kits comprise a bag of load material, such as coal or sand, plus sections of board that are cut to size to fit the desired wagon. The modeller, using a PVA adhesive, secures the materials on the cut boards and places the load inside the wagon for instant effect. The additional benefit, apart from the realism, is that some valuable weight is added to what might otherwise be a very light vehicle. Especially useful in an N scale wagon!

The N scale kits contain enough material for up to 6 wagons. Full instructions are provided in the packs.

All kits comprise a bag of load material, such as coal or sand, plus sections of board that are cut to size to fit the desired wagon. The modeller, using a PVA adhesive, secures the materials on the cut boards and places the load inside the wagon for instant effect. The additional benefit, apart from the realism, is that some valuable weight is added to what might otherwise be a very light vehicle. Especially useful in an N scale wagon!

The N scale kits contain enough material for up to 6 wagons. Full instructions are provided in the packs.

Usually supplied by a water tower (See LK-1, Ratio 506, 540, 551 and Wills SS34 kits).

10 6mm high self adhesive Water Meadow Grass tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.

Supplied in a square-section tube, the three separate sheets will match perfectly together to form a continuous run of 2400mm (95in), and reaching to a height of 333mm (13in). Future backscenes will match at either end allowing longer runs of scenery throughout the full length of a layout.

Often seen in the loco yard or near the platform end. Use LK-2 Water Cranes if additional cranes are required.

Pack of 4, 2 different types.

The NEW West Highland Line Platform Mounted Signal Box Laser-Cut Kit

The NEW West Highland laser-cut wood kits, all based on buildings on the existing West Highland Line extension between Fort William and Mallaig in Scotland. In fact Arisaig station was the inspiration for these attractive models, a delightful station on a very scenic and popular route, famous for many reasons but likely to be moist memorable for its role in the Harry Potter films. It is a route that has become a firm favourite with modellers so these kits will certainly be welcomed by many and be the inspiration for a number of new layout builds for sure.

FOOTPRINT (INC. ROOF OVERHANG) 65 X 65mm

The NEW West Highland Line Platform Shelter Laser-Cut Kit

The NEW West Highland laser-cut wood kits, all based on buildings on the existing West Highland Line extension between Fort William and Mallaig in Scotland. In fact Arisaig station was the inspiration for these attractive models, a delightful station on a very scenic and popular route, famous for many reasons but likely to be moist memorable for its role in the Harry Potter films. It is a route that has become a firm favourite with modellers so these kits will certainly be welcomed by many and be the inspiration for a number of new layout builds for sure.

Built by the North British Railway, the West Highland Line travelled through a stunning part of the country and soon became popular with tourists as well as providing an essential link to the outside world from the sparsely populated Highland areas. The station buildings are particularly attractive and our kit of the station at Arisaig personifies that appealing design.

The NEW Rannoch Station Wooden Laser-Cut Kit

The style of Rannoch Station building, built in 1894, is typical of the type of structure found on the North British-built line from Glasgow to Fort William. Sitting on an island platform this is a long building, so consequently the model created from this kit is certainly impressive! By contrast the platform-mounted signal box is quite diminutive when compared with the station, but both structures possess the stylish "Swiss Cottage" style of construction and consequently are very attractive.

Despite its size we have designed the station kit to be as easy to construct as possible, with carefully designed parts that fit snuggly together and the assembly instructions are clear and informative. It would not surprise us if the signal box kit is adapted for other uses, such as a shelter, tea room, waiting room or greenhouse: it has many possibilities! The kits feature some incredible detail and texture, something that we have been working really hard to achieve - so much better than the basic appearance of so many other laser cut kits available on the market.

FOOTPRINT (INC. CANOPY OVERHANG) 460mm x 114mm

The NEW West Highland Line Signal Box Laser-Cut Kit

The NEW West Highland laser-cut wood kits, all based on buildings on the existing West Highland Line extension between Fort William and Mallaig in Scotland. In fact Arisaig station was the inspiration for these attractive models, a delightful station on a very scenic and popular route, famous for many reasons but likely to be moist memorable for its role in the Harry Potter films. It is a route that has become a firm favourite with modellers so these kits will certainly be welcomed by many and be the inspiration for a number of new layout builds for sure.

The NEW West Highland Line Station Building Laser-Cut Kit

The NEW West Highland laser-cut wood kits, all based on buildings on the existing West Highland Line extension between Fort William and Mallaig in Scotland. In fact Arisaig station was the inspiration for these attractive models, a delightful station on a very scenic and popular route, famous for many reasons but likely to be moist memorable for its role in the Harry Potter films. It is a route that has become a firm favourite with modellers so these kits will certainly be welcomed by many and be the inspiration for a number of new layout builds for sure.

10 4mm high self adhesive wild meadow tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.

10 6mm high self adhesive Wild Meadow Grass tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.

Useful detail components for scratchbuilders.

10 6mm high self adhesive Winter Grass tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.

A accurately laser cut wood kit supplemented by injection moulded roof, windows and doors. Glue and paints required to complete model.

The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. The Static Grass Applicators PSG-1 and 2 electrostatically charge the grass filaments so that they stand vertically, regardless of the terrain. Mixing various lengths and colours of grasses can produce highly realistic textures and effects. Our Shows You How Booklet No 13 Detailing the Landscape and Youtube video clips show the effects that can be created.

Equally suitable for standard 0 gauge or 0-16.5, these beautifully cast unpainted White Metal figures will bring life and human interest to your layout.

Kit of a useful general purpose type crane, also often seen at canal basins etc.

Kit of a useful general purpose type crane, also often seen at canal basins etc.