A craft knife, files and liquid poly cement are required to for assembly

Use with LK-12106 Stone ramps and LK-12107 Brick paviours or LK-12108 concrete surface.

The TT:120 platform system comprises a variety of styles of platform edging, ramp edges and surfaces that can be used to create platforms of any size and shape. Platform edging designed for use alongside PECO TT:120 track and considers the height of the sleepers, resulting in an accurate platform 3 scale feet from the railhead.

Technical Specifications

6 pieces, each 133mm long

A craft knife, files and liquid poly cement are required to for assembly

Use with LK-12103 Brick platform edges and LK-12107 Brick paviours or LK-12108 concrete surface.

The TT:120 platform system comprises a variety of styles of platform edging, ramp edges and surfaces that can be used to create platforms of any size and shape. Platform edging designed for use alongside PECO TT:120 track and considers the height of the sleepers, resulting in an accurate platform 3 scale feet from the railhead.

Technical Specifications

2 handed pairs, each ramp 75mm long

Laser cut wooden kit with plastic chimney pot detail and glazing sheet.

A craft knife, needle files, glue (impact adhesive or PVA work well. Superglue can also be used apart from the glazing) and paints are required.

Designed to fit over PECO TT:120 track (not included).

Small goods shed with siding running through it, based on Bovey in South Devon. The doors can be fixed in either open or closed position and the interior features detailed stonework, roof rafters, loading platform and goods office.

Technical Specifications

Length 100mm

Width 110mm

Use SL-310 metal joiners and SL-1208 joining sleepers. Use SL-311 insulating joiners to create isolated track sections (if using DCC control these are not required).

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb flat bottom rail. The flexible sleeper base is detailed with fine wood grain and spikes through British Railways’ BR1 baseplates under the rails, a combination that continues to be widely used on Britain’s railways.

Code 55

Plastic kit, 4 buffer stops per pack.

A craft knife, needle files and liquid poly cement are required for construction.

For use with PECO TT:120 code 55 flexible track and turnouts.

The ends of sidings and bay platforms are usually terminated with a buffer stop to prevent rolling stock leaving the end of the track. When sidings are re-laid with flat-bottom rails, as represented by the PECO TT:120 range of code 55 flexible track and turnouts, often the original buffer stops made of bullhead rail would be re-used, along with the short length of track to which they are attached. examples of this can still be seen in various locations on Britain’s railway network.

Each kit includes 4 buffer stops, including 30mm lengths of dummy Bullhead track they are attached to. Each unit locates on the end of the track and needs to be glued to the baseboard.

Code 55

Unifrog

Use SL-310 metal rail joiners and SL-1208 joining sleepers.

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb rail, which continues to be widely used on Britain’s railways. The turnouts conform to NEM standards and the medium radius geometry is a close match to British Railways’ B6 standard.

Technical Specifications

Length - 180mm

Exit angle - 11.25¬?

Radius - Nominal 922.6mm/36.3"

Code 55

Unifrog

Use SL-310 metal rail joiners and SL-1208 joining sleepers.

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb rail, which continues to be widely used on Britain’s railways. The turnouts conform to NEM standards and the medium radius geometry is a close match to British Railways’ B6 standard.

Technical Specifications

Length - 180mm

Exit angle - 11.25¬?

Radius - Nominal 922.6mm/36.3"

RAILWAY OF THE MONTH

WALDHEIM

Saxon narrow gauge in garden - Jim Trotman reveals how he took his modelling to a larger scale and out into the garden on 45mm gauge. 

PLAN OF THE MONTH

LEWIS LAKE

An American On30 exhibition layout with character - Alan Aitken introduces his new compact portable layout.Ԫø

PLUS

LATEST REVIEWS
BOOK and VIDEO REVIEWS
NEWS

RAILWAY OF THE MONTH

GRAUB?úNDEN

A small part of Switzerland recreated in Austria - Diet Haimer explains how he came to model sections of the Rh?§tische Bahn metre gauge.

PLAN OF THE MONTH

BAVARIA 1910

Fifteen years of enjoyment and pleasant memories - Jim Trotman describes the period German HO layout which he helped Peter Baker to build.

PLUS

LATEST REVIEWS
BOOK and VIDEO REVIEWS
NEWS

Double unit loco lift. Designed as a replacement for the old SL-43 Loco Lift, this new versatile system still has the features that made the SL-43 so popular, such as the ability to directly drive the locomotive on and off the track. But that was limited to OO/HO scale and this new system has been developed to adapt to all scales from N through to EM, including OO-9 (HOe), HOn3, TT, HOm and OO/HO. 

Single unit loco lift. Designed as a replacement for the old SL-43 Loco Lift, this new versatile system still has the features that made the SL-43 so popular, such as the ability to directly drive the locomotive on and off the track. But that was limited to OO/HO scale and this new system has been developed to adapt to all scales from N through to EM, including OO-9 (HOe), HOn3, TT, HOm and OO/HO. 

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

These kits have been transferred over to Parkside from the PECO "Wonderful Wagons" range, a long-standing favourite kit of modellers for many years. Back then these kits were pre-coloured and decorated, but we have overhauled the kits, added an NEM pocket (so modellers can easily fit a coupler of their choice - although the kit is supplied with a set of tension-lock couplers) and now supply the kits with either a set of milk company decals (PC91) or oil company decals (PC92). The decals provide a whole lot more detail than previously applied to the original pre-decorated kits.

These kits have been transferred over to Parkside from the PECO "Wonderful Wagons" range, a long-standing favourite kit of modellers for many years. Back then these kits were pre-coloured and decorated, but we have overhauled the kits, added an NEM pocket (so modellers can easily fit a coupler of their choice - although the kit is supplied with a set of tension-lock couplers) and now supply the kits with either a set of milk company decals (PC91) or oil company decals (PC92). The decals provide a whole lot more detail than previously applied to the original pre-decorated kits.

These finely detailed ready to run coaches and wagons are accurately modelled on the rolling stock of the Lynton and Barnstaple Railway, both as an independent railway and after its' absorption into the Southern railway in 1922. They are also available painted but unlettered for those modellers who wish to tailor them for use on other lines.

These finely detailed ready to run coaches and wagons are accurately modelled on the rolling stock of the Lynton and Barnstaple Railway, both as an independent railway and after its' absorption into the Southern railway in 1922. They are also available painted but unlettered for those modellers who wish to tailor them for use on other lines.

These finely detailed ready to run coaches and wagons are accurately modelled on the rolling stock of the Lynton and Barnstaple Railway, both as an independent railway and after its' absorption into the Southern railway in 1922. They are also available painted but unlettered for those modellers who wish to tailor them for use on other lines.

PECO Streamline transition track for connecting Code 83 and Code 70 track.

Whilst our HO Code 83 track is perfect for modelling American mainlines, this new Code 70 track is just right for secondary lines, lightly-used branches, sidings, etc. Indeed, it will be perfect for modelling the early-to-mid 20th century railroading era when lighter rail was more commonly used. Featuring accurate rail spike detail, correctly proportioned ties (sleepers) and nickel silver rail, this new flexible track has been produced to the same high standard that modellers have come to expect from PECO and confirms to the specifications laid down by the NMRA.

Whilst our HO Code 83 track is perfect for modelling American mainlines, this new Code 70 track is just right for secondary lines, lightly-used branches, sidings, etc. Indeed, it will be perfect for modelling the early-to-mid 20th century railroading era when lighter rail was more commonly used. Featuring accurate rail spike detail, correctly proportioned ties (sleepers) and nickel silver rail, this new flexible track has been produced to the same high standard that modellers have come to expect from PECO and confirms to the specifications laid down by the NMRA..

Whilst our HO Code 83 track is perfect for modelling American mainlines, this new Code 70 track is just right for secondary lines, lightly-used branches, sidings, etc. Indeed, it will be perfect for modelling the early-to-mid 20th century railroading era when lighter rail was more commonly used. Featuring accurate rail spike detail, correctly proportioned ties (sleepers) and nickel silver rail, this new flexible track has been produced to the same high standard that modellers have come to expect from PECO and confirms to the specifications laid down by the NMRA..

These specially reinforced ARP (Air Raid Precautions) signal boxes featured substantial construction, primarily to protect the locking room gear from bomb blasts during air raids in World War II. A number of similar signal box designs were still to be found around the rail network until quite recently, due to them being difficult to demolish!
The 259 includes all moulded parts required which are produced to a high standard and in base colours. Kit requires painting and light weathering to create the signal box pictured above.

RAILWAY OF THE MONTH

MARANIQUE

The place is northern France, the time early summer 1918 - Peter Gray of the Waveney Valley MRC describes his First World War OO9 narrow gauge layout. 

PLAN OF THE MONTH

SPIEZ

Peter Marriott observes this busy junction on the Bern L??tschberg Simplon system as a prelude to modelling part of it. 

PLUS

LATEST REVIEWS
BOOK and VIDEO REVIEWS
NEWS

Private owner wagons abounded prior to nationalisation, they would often be seen far from their base as they were sent to collect raw materials and supplies such as coal, and deliver finished goods. All Peco wagons feature free running wheels in pin point axles. The ELC coupling, whilst compatible with the standard N gauge couplings, keeps a realistic distance between vehicles and enables the PL-25 electro magnetic decoupler to be used for remote uncoupling.