A Gantry to support signals, such as the semaphore signals in our Advanced Construction packs Ref 466 (GWR), 476(LMS), 477(LNWR) and 486(LNER/SR). It can also be used to mount colour light signals, and route and platform indicators. Glue and paints required to complete model.

4 x 143mm lengths of laddering.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 860mm of countryside fencing.

Stations often had these Water Cranes at the end of the platforms so the locomotives could be refilled without detaching them from the train. Also included is a coke brazier, called a 'fire devil' to keep the cast iron pipe from freezing up during the winter. These cranes were usually supplied by a large water tank (see Ratio 506 and 551 and Wills SS34 kits). Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track. This rigid track system is particularly useful on small layouts with tight curves, and is fully compatible with the 009 Streamline track system.

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track. This rigid track system is particularly useful on small layouts with tight curves, and is fully compatible with the 009 Streamline track system.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of vacuum formed clear plastic.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of vacuum formed clear plastic.

Stall with Bananas, Cucumbers, Melons and Peppers
Similar to SS365 and an ideal companion, but with a different selection of fruit and vegetables on display.
Size: 28mm x 14mm x 13mm high. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Approximate size: 29mm x 14mm x 11mm.
A little stall draped with imitation grass and topped with four open wooden boxes displaying farm fresh cauliflower, carrots, potatoes and apples. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

3.175mm (1/8" ) Diameter Hole (Pack of 50)

1.575mm (1/16") Diameter Hole (Pack of 50)

About 8000 were built in 1944-1947, almost 2000 of which worked in France until repatriated in the early 1950s. Most survived until the mid 1960s, as BR diagram 1/100. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings. Glue and paint will be required, along with appropriate transfers. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

(French type) Introduced in 1946, 7000 of these wagons were supplied to France and returned to BR in 1950-1952, where they lasted until the mid 1960s. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings. Glue and paint will be required, along with appropriate transfers. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

16 ton Mineral Wagon, Non Vacuum Fitted (diagram 1/108) Over 206,000 of these all steel, welded body wagons equipped with hand brakes only were built in the 1950s. They lasted in large numbers until the late 1980s. These finely moulded plastic wagon kits come complete with pin point axle wheels and bearings. Glue and paint will be required, along with appropriate transfers. Additional parts to enable the vehicle to be modelled incorporating modifications made to the prototypes during their working life are included where appropriate.

A neat array of coal sacks, 10 ready filled, leaning against folded empties, complete with the coalman's special shovel designed to filter out the 'slack'!
Size (mm) 30 x 25 x 9. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Stacked open coal sacks for use in a coal yard and as a flatbed lorry load for domestic delivery.
Size approx (mm) L52 x W25 x H18. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

These finely moulded plastic wagon kits come complete with pin point axle wheels. Glue and paint will be required, along with appropriate transfers.

These finely moulded plastic wagon kits come complete with pin point axle wheels. Glue and paint will be required, along with appropriate transfers.

Pack contains 4 Station Nameboards and transfer lettering to make up the name of your choice.

Pack contains 6 Telegraph Poles, these also carried railway bell codes and phone connections between signal boxes and stations as well as GPO lines.

After loading, open wagons were checked for height using this simple gauge to ensure that loads did not hit bridges etc. and therefore were usually placed near the yard exit.

These non-corridor coaches were built between 1903 and 1910 by the Midland Railway. They were used as close coupled sets for suburban services in the Manchester and Birmingham areas, remaining in service until the early 1950's. Glue, paint and transfers are required to complete this model.

These non-corridor coaches were built between 1903 and 1910 by the Midland Railway. They were used as close coupled sets for suburban services in the Manchester and Birmingham areas, remaining in service until the early 1950's. Glue, paint and transfers are required to complete this model.

These non-corridor coaches were built between 1903 and 1910 by the Midland Railway. They were used as close coupled sets for suburban services in the Manchester and Birmingham areas, remaining in service until the early 1950's. Glue, paint and transfers are required to complete this model.

These non-corridor coaches were built between 1903 and 1910 by the Midland Railway. They were used as close coupled sets for suburban services in the Manchester and Birmingham areas, remaining in service until the early 1950's. Glue, paint and transfers are required to complete this model.

Suitable for extending the Coal Depot (Ref 532) or as a stand alone item. The Ratio 526 Coal Sacks kit and Peco Scene Real Coal Refs PS-330,1 and 2 can provide extra detailing. Glue and paints required to complete model. Footprint: 75mm x 32mm

Used for loading goods onto wagons, these cranes were to be found by bay platforms in small stations with no goods sheds or in the yard of larger stations. The kit includes fine chain for the operating drive wheels and cord for the jib. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model.

Advanced Construction Signals. Aimed at modellers with more experience, these kits enable you to custom make specific configurations of signals to suit your track layout and train paths. This kit enables you to replicate a GWR Junction/Bracket Home signal. Glue and paints required to complete model.

Advanced Construction Signals. Aimed at modellers with more experience, these kits enable you to custom make specific configurations of signals to suit your track layout and train paths. This kit contains 2 posts, 2 Home arms and 1 Distant. It can also be used with the Pratt Truss Gantry kit (Ref 478) to provide over track signals. Glue and paints required to complete model.

16 Telegraph poles, these also carried railway bell codes and phone connections between signal boxes and stations as well as GPO lines. Height 100mm

Classic style fencing modelled on a GWR design, but still seen also in many other places, around parks, public buildings, monuments etc. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains:
‚Ģ 2 x 100mm lengths of ramp fencing
‚Ģ 8 assorted gates

Classic style fencing modelled on a GWR design, but still seen also in many other places, around parks, public buildings, monuments etc. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 700mm of fencing.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 680mm of fencing.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains:
‚Ģ 340mm of Straight Fencing
‚Ģ 2 x 102mm lengths of Ramp Fencing
‚Ģ 1 Large and 1 Small Gate
‚Ģ 2 Ramp Gates
‚Ģ 1 Ticket Gate

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track. This rigid track system is particularly useful on small layouts with tight curves, and is fully compatible with the 009 Streamline track system.

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track. This rigid track system is particularly useful on small layouts with tight curves, and is fully compatible with the 009 Streamline track system.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 170mm x 113mm of injection moulded styrene and thin enough to be sufficiently flexible to form the underside of a viaduct arch.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.