A popular size especially in the garden, SM-32 models are built to a scale of 16mm/foot and run on a gauge of 32mm, the equivalent of a two foot gauge railway. SM-32 has become the first choice for many narrow gauge enthusiasts who want to operate live steam locomotives by radio control, the large size of the locomotives means plenty of room for the receiver and control servos. The SM-32 Streamline track system is compatible with the SM-32 Setrack system.

Detailed model of the standard British Railways type. Three plastic moulded parts which, after assembly, clip onto the rails.

Peco Streamline Code 75 track meets the standards of enthusiasts who prefer to run trains on scale height rail. This rail height is used for our 00/H0 Fine Standard Track Systems (Ref nos. SL-100F, 102F, 104F, 106F) and our H0m (SL-1400) and H0n3 (SL-1500) track ranges; these joiners can also be used with the Code 83 Line American range (SL-8300 and 8302) and Code 75 Bullhead track (SL-108F).

Design prevents adjacent rails from touching whilst holding them in alignment. Insulated rail joiners are required to provide electrical breaks where Electrofrog turnouts are used, for more details see our Wiring the Layout publications Nos 4 and 21.

Peco Streamline Code 75 track meets the standards of enthusiasts who prefer to run trains on scale height rail. This rail height is used for our 00/H0 Fine Standard Track Systems (Ref nos. SL-100F, 102F, 104F, 106F) and our H0m (SL-1400) and H0n3 (SL-1500) track ranges; these joiners can also be used with the Code 83 Line American range (SL-8300 and 8302) and Code 75 Bullhead track (SL-108F). Insulated rail joiners are required to provide electrical breaks where Electrofrog turnouts are used, for more details see our Wiring the Layout publications Nos 4 and 21.

Designed to be used with our 00/H0 Code 100 track systems (Ref nos. SL-100 and 102); also with 0 Gauge Bullhead (SL-700BH) and 0-16.5/0n30 (SL-500) track systems.

Design prevents adjacent rails from touching whilst holding them in alignment. Insulated rail joiners are required to provide electrical breaks where Electrofrog turnouts are used, for more details see our Wiring the Layout publications Nos 4 and 21.

60 injection moulded chairs for the construction of turnouts and plain track, using Code 250 Flat Bottom rail.

30 injection moulded chairs for the construction of turnouts, using Code 250 Flat Bottom rail.

For large scale narrow gauge models running on 45mm gauge track, it is designed for electrically powered models but is also entirely suitable for running radio controlled live steam trains. The robust construction makes it equally at home for use both indoors and outside. These Setrack units are compatible with the Streamline G45 track system.

This crossing is designed to be used with the ST-6 Left Hand Turnout to make a crossing within the standard Setrack geometry. PECO Setrack N Gauge Code 80 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of N gauge model trains.
Being fully compatible with both Code 80 and Code 55 PECO Streamline, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

This crossing is designed to be used with the ST-5 Right Hand Turnout to make a crossing within the standard Setrack geometry. PECO Setrack N Gauge Code 80 - Unit trackage System
The high quality rigid unit trackage system suitable for all popular brands of N gauge model trains.
Being fully compatible with both Code 80 and Code 55 PECO Streamline, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.

This model platform system is ideal for use with Peco 00/H0 Setrack, Streamline and any other unit trackage system which conforms to British Standard geometry. Straight units are 168mm long, matching the Standard Straight (ST-200). The self adhesive printed strips supplied match either brick or stonework and can easily be applied to the platform edges. Platforms can be made to any length by simply clipping the units together. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of four widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the second radius curve.