Pack contains 2 Bus Stops and Shelters plus stick on signs. See Modelscene Passengers Standing Sets A and B 5057 and 5058.

Pack contains 2 bus stops with shelters and 6 signs.

Pack of 2
These little planters help to 'green' otherwise plain open spaces, concourses and doorways. They can mark out a boundary for the now obligatory 'smokers' areas outside pubs - don't forget to add a canopy to keep the rain off their patrons!
Size: 11mm square x 19mm high each. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Pack contains 2 Cable Drums as supplied in the Modelscene 5078 Cable Laying Party.

Pack contains 2 pre-coloured Cable Drums

Pack contains 3 painted figures, Cable Drum and Wheelbarrow. Use Modelscene 5079 Cable Drums to extend this set.

Pack contains 3 painted figures and cable drum

Approximate size: 32mm x 20mm x 15mm
Nineteen black tyres in a group with 16 piled and 3 leaning. A useful accessory not just for garages, but also scrapyards, farms, etc. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Where carriages, multiple unit sets or modern locos are stored for cleaning and maintenance, narrow platforms are provided for access. Still widely used today alongside carriage sidings, and also within storage and maintenance facilities (See Ratio 527 Carriage Shed and Wills Modern SSM300 Modern Industrial Building and SSM315 Extension kits). Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint: 500mm long plus access steps

Pack contains 3 pre-coloured Cars

Used to allow cattle or storm water to pass through an embankment. Pack of 2. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 64mm x 60mm plus wing walls.

Useful for 'installing' CCTV around your model factories, distribution depots, or prisons!

Approx 26mm diameter and 25mm high. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the quayside on your layout.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. This pack contains the parts for 2 Large (10mm x 7mm), and 2 Small (5mm x 6mm) Chimney Stacks

Pack of 6 confectionery dispensers.

A finishing touch to shopping streets and station platforms.
Size (mm) 27 x 27 x 15. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

Now a common sight in most parts of the country, these bins appear in standard black.
Size (mm) 6 x 7 x 15. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Now a common sight in most parts of the country, in an alternative green colour.
Size (mm) 6 x 7 x 15. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

Can be used to extend the SS15 Coal Yard kit or to provide coal facilities in the engine shed. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 104mm x 53mm.

In the days when everything came by rail, even the smallest goods yard would provide a facility for the local coal merchant next to a siding. This kit can easily be extended by adding more staithes using Ratio Coal Staithes kit 316. Glue and paints required to complete this model. Footprint 66mm x 23mm

In the days when everything came by rail, even the smallest goods yard would provide a facility for the local coal merchant next to a siding. The Ratio 526 Coal Sacks kit and Peco Scene Real Coal Refs PS-330,1 and 2 can provide extra detailing, as can the Modelscene Coalman and Scales Ref. 5029. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 140mm x 30mm

A weathering powder to give a working feel to locos, wagons, and anything (or anybody!) found around the loco yard.

For a working coal yard, can be used with FL 126.
Size (mm) 55 x 64 x 15. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Model of a small 'prefab' concrete panel building

Kit includes 48 coal sacks. Initially coal was transported in 12 ton wagons to railway yards. Coal merchants then transferred it to heavy duty 1 cwt sacks for supply to customers. The kit also includes weights and scales; supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model.

Stacked open coal sacks for use in a coal yard and as a flatbed lorry load for domestic delivery.
Size approx (mm) L52 x W25 x H18. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

A neat array of coal sacks, 10 ready filled, leaning against folded empties, complete with the coalman's special shovel designed to filter out the 'slack'!
Size (mm) 30 x 25 x 9. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Stacked open coal sacks for use in a coal yard and as a flatbed lorry load for domestic delivery. Approx 28mm long, 15mm wide and 10mm high. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Two groups of coal sacks with 12 sacks in each group ready for the coal merchant to deliver. Pack of 2, each approx 14mm long, 11mm wide and 5mm high. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

These are the larger coal sacks from an earlier time.
Size approx (mm) L30 x W25 x H10. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. These Coal Staithes can be used to extend the Coal Depot (ref 229) or as a stand alone feature. Footprint: 36mm x 23mm

Suitable for extending the Coal Depot (Ref 532) or as a stand alone item. The Ratio 526 Coal Sacks kit and Peco Scene Real Coal Refs PS-330,1 and 2 can provide extra detailing. Glue and paints required to complete model. Footprint: 75mm x 32mm

Single moulding, no assembly required.

Coal load to fit a Hornby (TM) 4 plank wagon.
Size 56.5 x 26.5mm. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.

Coal facilities were essential at all stations in the steam era; for heating, supplies for the area and for locos. A larger coal yard can be made by adding more SS17 coal bunkers. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint:122mm x 50mm.

An essential part of every small steam loco depot, add some Peco Scene Real Coal Refs PS-330/1/2 for full effect. Supplied with pre-coloured parts although painting and/or weathering (Peco Scene PS-362 Coal Dust) can add realism; glue is required to complete this model. Footprint 60mm x 55mm

Pack includes 2 Coalmen and Weighing Scales. See Ratio 532 Coal depot and Wills SS15 Coal Yard and Hut.

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

2 (dummy) Colour Light Signals plus Switch Boxes

The modern answer to waste management, seen on the streets of towns and cities throughout the country.
Size approx (mm) 24 x 20 x 24. The Harburn Hamlet range of painted resin accessories provide interesting scenic details to go around the station and streets of your layout.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 485mm of fencing; the SR's modular design makes it easy to form ramp sections or follow other changes in ground contour.