Classic style fencing modelled on a GWR design, but still seen also in many other places, around parks, public buildings, monuments etc. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 700mm of fencing.

Classic style fencing modelled on a GWR design, but still seen also in many other places, around parks, public buildings, monuments etc. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains:
‚Ģ 2 x 100mm lengths of ramp fencing
‚Ģ 8 assorted gates

Pack contains 4 each of 25, 30, 50, 60, 80 and 100 mph plus optional directional arrows. Simple painting may be required.

10 6mm high self adhesive Spring Grass tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.

This common type of water tower is usually found tucked away and used to supply individual water cranes (2 included with kit - Ratio Water Crane kit 212 is available if more are required). The water flow was controlled from the hand wheels on the cranes. Supplied with pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Footprint 34mm x 29mm

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Our model faithfully captures the mitred edges of the prototype; this pack contains 600mm of fencing.

Kit includes:
‚Ģ 2 x 120mm ramps (1 L/H, 1 R/H)
‚Ģ 2 large gates and 2 small gates

After loading, open wagons were checked for height using this simple gauge to ensure that loads did not hit bridges etc. and therefore were usually placed near the yard exit. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Kit for 4 seats, a post war steel and timber design which originated on the Southern Railway.

Fully painted figures to add to your station or street scenes.

Fully painted figures to add to your station.

The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. The Static Grass Applicators PSG-1 and 2 electrostatically charge the grass filaments so that they stand vertically, regardless of the terrain. Mixing various lengths and colours of grasses can produce highly realistic textures and effects. Our Shows You How Booklet No 13 Detailing the Landscape and Youtube video clips show the effects that can be created.

Placed at the foot of platform end ramps, barrow crossings allow light goods and luggage to be transferred across a double track to an adjoining platform by railway staff. Glue and paints required to complete model.

With this kit you can add a 2nd canopy to Station Building kit (Ref 204) for use on an island platform, or alternatively as an awning on the 'taxi side' of the station building. Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

This 180mm long and 60mm wide Canopy is designed for use with the SS61 Platform sections and SS78 Island Platform building, but can be used with any suitable platform system. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Pack contains approx 914mm of fencing

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains:
‚Ģ 340mm of Straight Fencing
‚Ģ 2 x 102mm lengths of Ramp Fencing
‚Ģ 1 Large and 1 Small Gate
‚Ģ 2 Ramp Gates
‚Ģ 1 Ticket Gate

A parade of shops for the station approach or under the railway embankment. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 138mm x 9mm

A 1930's style garage and petrol station. Pumps included. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 114mm x 84mm.

A spartan passenger station seen in rural areas. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 185mm x 30mm.

A spartan passenger station seen in rural areas, a shelter is provided for waiting passengers. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 220mm x 50mm.

Pack of 3 free standing Station Nameboards, ready for your own station name.

Pack contains 4 Station Nameboards and transfer lettering to make up the name of your choice.

Pack contains 4 Station Nameboards

Pack contains 2 each of the following signs: Way Out, To The Trains, Station Master, Booking Office, Parcel Office, Waiting Room, Refreshments, Gentlemen, Ladies Room, Platform 1, Platform 2, Platform 3, Platform 4, and Running in Boards with 8 sets of the alphabet to make up the desired station name. Painting is required.

A simple kit to make 4 of these typical cast iron gas lamps.

Designed to complement the SS67 Country Station Building - some shelter for passengers awaiting a train from another platform. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 92mm x 60mm.

Fully painted figures to add to your station or street scenes.

Kit and scratch builders accessory, 724mm of station canopy valancing and 6 notice boards.

These simple kit lamps can represent oil, gas or electric lamps. Supplied in a pack 4; supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model.

The 2 Trestles as supplied in kit 241 are available separately, ideal for use with Peco NB-38 and 39 Girder Bridge sides or for those who enjoy scratchbuilding and kit bashing. Footprint: 61mm x 12mm, 125mm Height

Additional piers for the 251 Viaduct kit, can also be used as supports for the NB-38 and 39 Girder Bridge Sides. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Height 88mm, width 63mm each

This model platform system is ideal for use with Peco N Setrack, Streamline and any other unit trackage system which conforms to the same geometry. The two sections in this pack make a 288mm long platform plus ramps; it can easily be extended by simply clipping in additional ST-94 Stone type platform units. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of three widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the Setrack curve.

Plastic sheet emulating Stone Walling which matches the Bridge and Tunnel Mouths NB-31-34. Pack of 4

Pack contains 7 pieces.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 680mm of fencing.

As shown, designed to fit into a platform without the need to cut into the baseboard. Can be assembled as two staircases or one of greater depth. Also can be used as a pedestrian subway in a street scene.

As shown, designed to fit into a platform without the need to cut into the baseboard. Can be assembled as two staircases or one of greater depth. Also can be used as a pedestrian subway in a street scene.

Changes the SSM300 into a Supermarket. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Includes 9 non working lamps with a selection or parts to make double or single standard lamps, or wall lamps. Glue and paints required to complete model. Height 46mm.

3 different types of confectionery dispensers.

These sheets are invaluable for scratchbuilding, saving many hours of repetitive work creating the various surface patterns and textures. They are the same as those used in the Craftsman kits to make extension work easier. Each pack contains 4 sheets 130mm x 75mm of injection moulded styrene approximately 2mm thick, making them rigid enough to be self supporting.

These distinctive huts were once a common sight in town centres and at larger railway stations. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 93mm x 47mm.

An extra scene for the station forecourt, industrial area, or layby. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 58mm x 42mm.

10 Telegraph poles, these also carried railway bell codes and phone connections between signal boxes and stations as well as GPO lines. Height approx 50mm

16 Telegraph poles, these also carried railway bell codes and phone connections between signal boxes and stations as well as GPO lines. Height 100mm

Pack contains 6 Telegraph Poles, these also carried railway bell codes and phone connections between signal boxes and stations as well as GPO lines.

Pack contains 8 Telegraph Poles