Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Ratio 308 Flag Stones or other surface material cut to the desired platform shape. (There are 2 pairs of ramp sides per packet).

Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Ratio 308 Flag Stones or other surface material cut to the desired platform shape. (There are 2 pairs of ramp sides per packet).

Kit for 2 Platform Ramps to match Ratio Straight Platform Sections kit (Ref 209). Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 120mm x 40mm each.

Pack contains 12 pre-coloured Platform Seats

Pack contains two 144mm long platform units that simply clip to the ST-90 Complete Brick Type Platform system to make a longer platform. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of three widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the Setrack curve. See our Useful Guides Section for publications that will give you tips, instruction and inspiration on building a great model railway.

Pack contains two 144mm long platform units that simply clip to the ST-91 Stone Type Complete Platform system to make a longer platform.As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of three widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the Setrack curve. See our Useful Guides Section for publications that will give you tips, instruction and inspiration on building a great model railway.

Kit contains parts to make a 240mm long and 40mm wide platform; easily extended by using further kits. Use Ratio Platform Ramps kit 210 with these platforms. Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

• TUFTS – 100 x Poppy Self-Adhesive Static Grass Tufts by War World Scenics
• SELF-ADHESIVE – Easy to use, just peel & stick where required
• COLOURS – Available in more than 30 different colours and styles
• LENGTHS – Available in 4mm, 6mm and 10mm lengths
• IDEAL – For representing bushes and wild or long grass on model railway layouts, miniature bases, wargame battleboards and model dioramas

• TUFTS – 100 x Poppy Self-Adhesive Static Grass Tufts by War World Scenics
• SELF-ADHESIVE – Easy to use, just peel & stick where required
• COLOURS – Available in more than 30 different colours and styles
• LENGTHS – Available in 4mm, 6mm and 10mm lengths
• IDEAL – For representing bushes and wild or long grass on model railway layouts, miniature bases, wargame battleboards and model dioramas

Pack contains 9 assorted pre-coloured Post and Pillar Boxes.

A Gantry to support signals, such as the semaphore signals in our kits Ref 260, 262 and 270. It can also be used to mount colour light signals, and route and platform indicators. Glue and paints required to complete model.

• The definitive Pro Grass Layering System N Gauge starter kit by WWScenics.
• Contains a Pro Grass N-Gauge Micro Applicator, Basing Glue, Layering Spray, D-Baller tool and a selection of static grasses .
• Create realistic model scenery using the Pro Grass Layering System method, pioneered by WWScenics. 
• Suitable for Beginners and Experts. 
• Supplied in our own custom-made storage box, for secure and tidy storage.

This versatile building would contain a boiler to provide steam either for a pump raising water or to generate electricity for a small factory. Sometimes a short siding was provided alongside for coal deliveries. Kit includes the main building, brick chimney, water tank and outbuilding. Supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Footprint 95mm x 65mm

Kit contains parts to make 12 Relay Boxes. Use with Concrete Trunking (Ref 258); supplied with pre-coloured parts although painting and/or weathering can add realism. Glue is required to complete this model.

Often seen supporting railway cuttings and embankments in urban areas where there is insufficient space for earth slopes. Make cuttings, yard walls or raised railway viaducts with these versatile sections. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Length 348mm, Height 35mm

The Wills scenic series provides a range of simple to make kits that help to change your layout into a model railway that contains real life detail. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Height 68mm.

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm

This common type of station water tower can be used either platform or ground mounted and is supplied with stove, drain, hose and etched ladder. The stove was used to stop the water freezing in the crane arm. Can also supply other platform mounted water cranes (Ratio Water Crane and Fire Devil Ref 212). Glue and paints required to complete model. Tank diameter:22mm.

Pack contains 14 pre-coloured Sheep

Adds the finishing touches to any signal box (See Ratio 236 and Peco NB-3 kits); it contains all you need to fit out a typical signal box including a 20-lever frame and a level crossing operating wheel. This kit also includes etched window frames, glazing, barge boards, guttering and downpipes. Glue and paints required to complete model.

Pack contains 3 x 63mm lengths of etched brass laddering and includes safety cages and fixings.

Pack contains 4 pre-coloured Skips

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm

This common type of water tower is usually found tucked away and used to supply individual water cranes (2 included with kit - Ratio Water Crane kit 212 is available if more are required). The water flow was controlled from the hand wheels on the cranes. Supplied with pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Footprint 34mm x 29mm