Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Ratio 308 Flag Stones or other surface material cut to the desired platform shape. (There are 2 pairs of ramp sides per packet).

Fully detailed, injection moulded plastic sections of platform ramp edging; these units can be curved if desired. Use with Ratio 308 Flag Stones or other surface material cut to the desired platform shape. (There are 2 pairs of ramp sides per packet).

Kit for 2 Platform Ramps to match Ratio Straight Platform Sections kit (Ref 209). Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 120mm x 40mm each.

Pack contains 12 pre-coloured Platform Seats

Pack contains two 144mm long platform units that simply clip to the ST-90 Complete Brick Type Platform system to make a longer platform. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of three widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the Setrack curve. See our Useful Guides Section for publications that will give you tips, instruction and inspiration on building a great model railway.

Pack contains two 144mm long platform units that simply clip to the ST-91 Stone Type Complete Platform system to make a longer platform.As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of three widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the Setrack curve. See our Useful Guides Section for publications that will give you tips, instruction and inspiration on building a great model railway.

Kit contains parts to make a 240mm long and 40mm wide platform; easily extended by using further kits. Use Ratio Platform Ramps kit 210 with these platforms. Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

• TUFTS – 100 x Poppy Self-Adhesive Static Grass Tufts by War World Scenics
• SELF-ADHESIVE – Easy to use, just peel & stick where required
• COLOURS – Available in more than 30 different colours and styles
• LENGTHS – Available in 4mm, 6mm and 10mm lengths
• IDEAL – For representing bushes and wild or long grass on model railway layouts, miniature bases, wargame battleboards and model dioramas

• TUFTS – 100 x Poppy Self-Adhesive Static Grass Tufts by War World Scenics
• SELF-ADHESIVE – Easy to use, just peel & stick where required
• COLOURS – Available in more than 30 different colours and styles
• LENGTHS – Available in 4mm, 6mm and 10mm lengths
• IDEAL – For representing bushes and wild or long grass on model railway layouts, miniature bases, wargame battleboards and model dioramas

Pack contains 9 assorted pre-coloured Post and Pillar Boxes.

A Gantry to support signals, such as the semaphore signals in our kits Ref 260, 262 and 270. It can also be used to mount colour light signals, and route and platform indicators. Glue and paints required to complete model.

• The definitive Pro Grass Layering System N Gauge starter kit by WWScenics.
• Contains a Pro Grass N-Gauge Micro Applicator, Basing Glue, Layering Spray, D-Baller tool and a selection of static grasses .
• Create realistic model scenery using the Pro Grass Layering System method, pioneered by WWScenics. 
• Suitable for Beginners and Experts. 
• Supplied in our own custom-made storage box, for secure and tidy storage.

This versatile building would contain a boiler to provide steam either for a pump raising water or to generate electricity for a small factory. Sometimes a short siding was provided alongside for coal deliveries. Kit includes the main building, brick chimney, water tank and outbuilding. Supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Footprint 95mm x 65mm

Kit contains parts to make 12 Relay Boxes. Use with Concrete Trunking (Ref 258); supplied with pre-coloured parts although painting and/or weathering can add realism. Glue is required to complete this model.

Often seen supporting railway cuttings and embankments in urban areas where there is insufficient space for earth slopes. Make cuttings, yard walls or raised railway viaducts with these versatile sections. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Length 348mm, Height 35mm

The Wills scenic series provides a range of simple to make kits that help to change your layout into a model railway that contains real life detail. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Height 68mm.

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm

This common type of station water tower can be used either platform or ground mounted and is supplied with stove, drain, hose and etched ladder. The stove was used to stop the water freezing in the crane arm. Can also supply other platform mounted water cranes (Ratio Water Crane and Fire Devil Ref 212). Glue and paints required to complete model. Tank diameter:22mm.

Pack contains 14 pre-coloured Sheep

Adds the finishing touches to any signal box (See Ratio 236 and Peco NB-3 kits); it contains all you need to fit out a typical signal box including a 20-lever frame and a level crossing operating wheel. This kit also includes etched window frames, glazing, barge boards, guttering and downpipes. Glue and paints required to complete model.

Pack contains 3 x 63mm lengths of etched brass laddering and includes safety cages and fixings.

Pack contains 4 pre-coloured Skips

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm

This common type of water tower is usually found tucked away and used to supply individual water cranes (2 included with kit - Ratio Water Crane kit 212 is available if more are required). The water flow was controlled from the hand wheels on the cranes. Supplied with pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Footprint 34mm x 29mm

A model of the station at Castle Cary, Somerset. Although of typically GWR design, it can be adapted to suit that of other railway companies. The kit includes notice boards, telephone and first aid boxes. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 110mm x 32mm.

With this kit you can add a 2nd canopy to Station Building kit (Ref 204) for use on an island platform, or alternatively as an awning on the 'taxi side' of the station building. Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

The pre coloured parts of this plastic kit can be assembled in a number of ways ; further kits can be combined to make a larger structure if required.

This kit will make 2 Station houses with single storey extensions; assembly can be varied , extra doors and windows are included.

Pack contains 4 Station Nameboards

This plastic kit contains a platform shelter plus a timber and brick hut.

These simple kit lamps can represent oil, gas or electric lamps. Supplied in a pack 4; supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model.

The 2 Trestles as supplied in kit 241 are available separately, ideal for use with Peco NB-38 and 39 Girder Bridge sides or for those who enjoy scratchbuilding and kit bashing. Footprint: 61mm x 12mm, 125mm Height

This kit gives you the opportunity to make an interesting bridge for your layout. The design is fairly universal across the world, often found spanning tracks in urban areas or bridging rivers in the country. This style of truss girder bridge is also very common in mountainous regions. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Size: Span 144mm. Trestle: 61mm x 12mm, 125mm Height

This kit is designed to extend the Steel Truss Bridge with Stone Piers (Ref 240). Supplied with decking and truss girder sides together with a single trestle. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Size: Span 144mm. Trestle: 61mm x 12mm, 125mm Height

This kit represents a typical Goods Shed, essential to most railway stations for the storage and transfer of dry goods to road vehicles for distribution. The Peco range of wagon loads (e.g. NR-203 Timber Loads) for 10 and 15 ft. wagons provide realistic deliveries. Supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Footprint 90mm x 70mm

Additional piers for the 251 Viaduct kit, can also be used as supports for the NB-38 and 39 Girder Bridge Sides. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Height 88mm, width 63mm each

This model platform system is ideal for use with Peco N Setrack, Streamline and any other unit trackage system which conforms to the same geometry. The two sections in this pack make a 288mm long platform plus ramps; it can easily be extended by simply clipping in additional ST-94 Stone type platform units. As supplied the units fit a standard track configuration but it is easy to adapt to suit other situations; just cut the platform surfaces to any of three widths by following the scribed lines on the back. Ramps can be made to one of two widths, and have curved sides to match the Setrack curve.

Plastic sheet emulating Stone Walling which matches the Bridge and Tunnel Mouths NB-31-34. Pack of 4

As shown, designed to fit into a platform without the need to cut into the baseboard. Can be assembled as two staircases or one of greater depth. Also can be used as a pedestrian subway in a street scene.

10 Telegraph poles, these also carried railway bell codes and phone connections between signal boxes and stations as well as GPO lines. Height approx 50mm

Pack contains 8 Telegraph Poles

Pack contains 3 pre-coloured Telephone Boxes.

Can be extended by adding additional kits and the 254 Piers, or with the 252 Extra Arch and Pier. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 220mm x 63mm, 130mm High.

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm

Modelled on the Saxby and Farmer design that was to be found around the country, this kit can be combined with further kits to make a larger signal box if required. Use the Ratio Signal Box Interior kit No. 224 for a 20 lever frame, level crossing wheel and other detail.

• Durable Craftsmanship: Constructed from sturdy 3mm laser-cut MDF for reliable, long-lasting use.
• Customisable Drawers: 10 adjustable drawers designed to fit TT:120 and OO9 locomotives, wagons, trucks, or vehicles securely.
• Smooth Sliding System: Easy-access drawers with a smooth-sliding design make organizing and retrieving your models hassle-free.
• Label-Friendly Design: Each drawer features a front-facing label slot, offering quick identification of your collection.
• Stackable Convenience: Interlocking tabs allow multiple boxes to be securely stacked for scalable storage solutions.
• Protective Foam Inserts: Includes foam sheets to create custom inserts for extra protection, ensuring your locomotives and rolling stock remain safe.

Pair of detailed Tunnel Mouths, with separate wings walls for optional positioning. Matching Stone Walling is also available (NB-40).

Pair of detailed Tunnel Mouths, with separate wings walls for optional positioning. Matching Stone Walling is also available (NB-40).