Use SL-310 metal joiners and SL-1208 joining sleepers. Use SL-311 insulating joiners to create isolated track sections (if using DCC control these are not required).

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb flat bottom rail. The flexible sleeper base is detailed with fine wood grain and spikes through British Railways’ BR1 baseplates under the rails, a combination that continues to be widely used on Britain’s railways.

Code 55

Plastic kit, 4 buffer stops per pack.

A craft knife, needle files and liquid poly cement are required for construction.

For use with PECO TT:120 code 55 flexible track and turnouts.

The ends of sidings and bay platforms are usually terminated with a buffer stop to prevent rolling stock leaving the end of the track. When sidings are re-laid with flat-bottom rails, as represented by the PECO TT:120 range of code 55 flexible track and turnouts, often the original buffer stops made of bullhead rail would be re-used, along with the short length of track to which they are attached. examples of this can still be seen in various locations on Britain’s railway network.

Each kit includes 4 buffer stops, including 30mm lengths of dummy Bullhead track they are attached to. Each unit locates on the end of the track and needs to be glued to the baseboard.

Code 55

Unifrog

Use SL-310 metal rail joiners and SL-1208 joining sleepers.

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb rail, which continues to be widely used on Britain’s railways. The turnouts conform to NEM standards and the medium radius geometry is a close match to British Railways’ B6 standard.

Technical Specifications

Length - 180mm

Exit angle - 11.25¬?

Radius - Nominal 922.6mm/36.3"

Code 55

Unifrog

Use SL-310 metal rail joiners and SL-1208 joining sleepers.

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb rail, which continues to be widely used on Britain’s railways. The turnouts conform to NEM standards and the medium radius geometry is a close match to British Railways’ B6 standard.

Technical Specifications

Length - 180mm

Exit angle - 11.25¬?

Radius - Nominal 922.6mm/36.3"

Code 55

Use SL-310 metal joiners and SL-1208 joining sleepers. Use SL-311 insulating joiners to create isolated track sections (if using DCC control these are not required).

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb flat bottom rail. The flexible sleeper base is detailed with fine wood grain and spikes through British Railways’ BR1 baseplates under the rails, a combination that continues to be widely used on Britain’s railways.

Concrete sleeper track has been in use on the railways of Britain since around 1940, usually combined with wooden sleeper turnouts and crossings, and this track is a faithful representation of this design.

If you wish to mix wheel standards on your 00/H0 layout, this is the trackage to choose. Code 100 rail allows flange depths up to 1.6mm which means that both vintage and current stock will run happily together. The wide range of turnouts and crossings in this series includes every type, and the geometry of this range has been cleverly designed to make it easy to build convenient, complex and aesthetically pleasing formations.

Double unit loco lift. Designed as a replacement for the old SL-43 Loco Lift, this new versatile system still has the features that made the SL-43 so popular, such as the ability to directly drive the locomotive on and off the track. But that was limited to OO/HO scale and this new system has been developed to adapt to all scales from N through to EM, including OO-9 (HOe), HOn3, TT, HOm and OO/HO. 

Single unit loco lift. Designed as a replacement for the old SL-43 Loco Lift, this new versatile system still has the features that made the SL-43 so popular, such as the ability to directly drive the locomotive on and off the track. But that was limited to OO/HO scale and this new system has been developed to adapt to all scales from N through to EM, including OO-9 (HOe), HOn3, TT, HOm and OO/HO. 

These finely detailed ready to run coaches and wagons are accurately modelled on the rolling stock of the Lynton and Barnstaple Railway, both as an independent railway and after its' absorption into the Southern railway in 1922. They are also available painted but unlettered for those modellers who wish to tailor them for use on other lines.

These finely detailed ready to run coaches and wagons are accurately modelled on the rolling stock of the Lynton and Barnstaple Railway, both as an independent railway and after its' absorption into the Southern railway in 1922. They are also available painted but unlettered for those modellers who wish to tailor them for use on other lines.

These finely detailed ready to run coaches and wagons are accurately modelled on the rolling stock of the Lynton and Barnstaple Railway, both as an independent railway and after its' absorption into the Southern railway in 1922. They are also available painted but unlettered for those modellers who wish to tailor them for use on other lines.

PECO Streamline transition track for connecting Code 83 and Code 70 track.

Whilst our HO Code 83 track is perfect for modelling American mainlines, this new Code 70 track is just right for secondary lines, lightly-used branches, sidings, etc. Indeed, it will be perfect for modelling the early-to-mid 20th century railroading era when lighter rail was more commonly used. Featuring accurate rail spike detail, correctly proportioned ties (sleepers) and nickel silver rail, this new flexible track has been produced to the same high standard that modellers have come to expect from PECO and confirms to the specifications laid down by the NMRA.