BROWSE PECO PRODUCTS
Browse through our complete product portfolio.
659 Products Found
VEA Chassis Air braked detail.
Air brake, no headstocks as supplied with VEA ex Vanwide kit PC76.
Coupling Mounting Blocks
15 pairs for Bachmann (TM) 36-025 and 36-026 Mk2 Mini type Couplings.
Fine Chain 9 links per inch
Useful as a load or for securing loads, or for cranes, hoists etc.
Fine Chain 13 links per inch
Useful as a load or for securing loads, or for cranes, hoists etc.
BR BD Container
Diagram 3/050; a Conflat wagon or road vehicle load. As supplied with Conflat A Container Wagon kit PC52.
BR FM Container
Diagram 3/201; a Conflat wagon or road vehicle load. As supplied with Conflat A Container Wagon kit PC46.
BR 10 foot Chassis kit, Vacuum Fitted with Clasp Brake Shoes
Kit and scratch builders accessory; as included in the 12 ton 'Vanwide' kit PC41. Includes both LMS (J' Hanger) and BR Type Spring Suspension detail.
LNER DX Open Container kit
As supplied with the Conflat 'S' Container wagon kit PC35; open containers were widely used until the early 1960's.
BR 12 foot Wagon Chassis kit (Unfitted) - Morton Brake
Kit and scratch builders accessory; as included in the 21 ton Loco Coal Wagon kit PC31.
BR 10 foot Chassis kit, Vacuum Fitted with Push Brake Shoes
Kit and scratch builders accessory; as included in the Shock Absorbing Open wagon kit PC28.
BR/RCH 9 foot Wagon Chassis kit (Unfitted) - Double Brake
Kit and scratch builders accessory; as included in the 16 ton Mineral Wagon kit PC22.
BR/RCH 9 foot Wagon Chassis kit (Unfitted) - Morton Brake
Kit and scratch builders accessory; as included in the 16 ton Mineral Wagon kit PC21.
LNER 10 foot Chassis kit, Vacuum Fitted with Clasp Brake Shoes
Kit and scratch builders accessory; as included in the 12 ton 5 Plank Open wagon kit PC25.
Bolster Set
Kit and scratch builders accessory; as included in the 21 ton Twin Bolster wagon kit PC18.
Trestle Set
Kit and scratch builders accessory; as included in the LNER/BR Trestle wagon kit PC17.
Catenary Contact Wires 200mm
The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. This pack includes:
‚Ģ 5 200mm long OHLE Contact Wires for use with the LC-100 Catenary System 12 Mast Pack and LC-110 Catenary System Mast.
Catenary Mast Installation Jig
The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available.
‚Ģ The Installation jig is for use when installing the OHLE Catenary system. N.B. 2 of these jigs are included in the LC-100 Catenary System Startup Pack.
Catenary System Mast
The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. This pack includes:
‚Ģ An additional Mast plus push on/push off hangar to extend the LC-100 Catenary System Startup Pack.
Conductor Rail Chairs
For adding 3rd and 4th Conductor rails to existing track as found on Southern, Merseyside and London Transport systems, for example. Use IL-1 Code 60 rail with these chairs
OO-9 L & B Coach Bogies, Wheels and Couplers
009 Accessories for kit and scratchbuilding projects
LNWR Grand Junction Station Building Components: 4 Plain Board Panels
Based on an LNWR design, but useful for emulating wooden station building structures seen across the British Isles. Pack contains 4 Plain Board Panels (27mm Wide by 53mm High). The modular design of this series (see also GJ01, 2 and 3) enables the construction of a tailor made building to suit the model location. Roofing (See the Wills Roofing Materials Pack SSMP229 Sheet and Batten Roofing and Ratio 516 Platform Valencing, Platform Canopy kits Ref Wills SS54 and Ratio 515), glue and paints are required to complete this model.
LNWR Grand Junction Station Building Components: 4 Single Door Panels
Based on an LNWR design, but useful for emulating wooden station building structures seen across the British Isles. Pack contains 4 Single Door Panels (27mm Wide by 53mm High). The modular design of this series (see also GJ01, 2 and 4) enables the construction of a tailor made building to suit the model location. Roofing (See the Wills Roofing Materials Pack SSMP229 Sheet and Batten Roofing and Ratio 516 Platform Valencing, Platform Canopy kits Ref Wills SS54 and Ratio 515), glue and paints are required to complete this model.
LNWR Grand Junction Station Building Components: 4 Window Panels
Based on an LNWR design, but useful for emulating wooden station building structures seen across the British Isles. Pack contains 4 Window Panels (27mm Wide by 53mm High). The modular design of this series (see also GJ01, 3 and 4) enables the construction of a tailor made building to suit the model location. Roofing (See the Wills Roofing Materials Pack SSMP229 Sheet and Batten Roofing and Ratio 516 Platform Valencing, Platform Canopy kits Ref Wills SS54 and Ratio 515), glue and paints are required to complete this model.
LNWR Grand Junction Station Building Components: 4 Plain Board End Panels
Based on an LNWR design, but useful for emulating wooden station building structures seen across the British Isles. Pack contains 4 Plain Board End Panels (47mm Wide by 53mm High). The modular design of this series (see also GJ02, 3 and 4) enables the construction of a tailor made building to suit the model location. Roofing (See the Wills Roofing Materials Pack SSMP229 Sheet and Batten Roofing and Ratio 516 Platform Valencing, Platform Canopy kits Ref Wills SS54 and Ratio 515), glue and paints are required to complete this model.
Coal Wagon Load
Coal load to fit a Hornby (TM) 4 plank wagon.
Size 56.5 x 26.5mm. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Hornby(TM) Coal Wagon Load
For Hornby (TM) wagons with internal measurements as shown.
Size (mm) 62 x 28. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Bachmann(TM) Coal Wagon Load
Sized for original Bachmann (TM) coal wagons, but they can be pared with a knife to fit into smaller open wagons.
Size (mm) 67 x 29. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Tree Trunks, Bound
Place near old woodland or put on bogie bolster wagons.
Size (mm) 123 x 33 x 20. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Cut Timber Load
For use in Cambrian (TM) OTA wagons or stored beside a tree plantation.
Size (mm) 132 x 32 x 30. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Assorted Merchandise
An interesting assortment of crates, sacks, barrels etc ready palleted.
Size (mm) 61 x 29 x 20. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Terracotta Pipes on Pallets
Drainage pipes for linesides, builder's yards and construction sites (See also Modelscene 5065 Sewage Pipes). Size (mm) 62 x 29 x 18. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Coal Heap, Sacks and Shovel
For a working coal yard, can be used with FL 126.
Size (mm) 55 x 64 x 15. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
Stockpile of Builders Materials
A versatile load for a lorry or house building plot.
Size (mm) 60 x 27 x 14. The Harburn Hamlet range of painted resin accessories provide interesting scenic details for your layout.
